EdisonJwa
2735c55c97
Per external review (helpful checklist from ChatGPT-style analysis pointing out we never verified that iOS actually accepted our preferred sample rate / channels / format): preferredSampleRate and preferredIOBufferDuration are HINTS, not guarantees. iOS may substitute its own values if the hardware can't satisfy our preference. If VPIO is running at 44.1 kHz Float32 stereo while our render callback writes 48 kHz Int16 mono into the buffer, the symptoms would match what user reports (broken playback, pitch shifted, severe distortion) and our previous diagnostics wouldn't catch it because they only sampled signal-level metrics. This commit adds two diagnostic emissions to verify: 1. AppDelegate.swift::activateAudioSession: after setActive succeeds, log the ACTUAL session state \u2014 category, mode, sampleRate, ioBufferDuration, current route (inputs + outputs), outputVolume. Lets us see whether iOS honoured our .default + .defaultToSpeaker setup and which physical route it picked at launch. 2. ios_voice_unit.rs::IosVoiceUnit::start: after unit.start() succeeds, log the actual OUTPUT and INPUT stream formats VPIO accepted (sample_rate, channels, sample_format, flags). If these differ from our requested 48 kHz Int16 mono, we have a format-substitution problem. Three possible outcomes from the next test: * Both diagnostics confirm 48 kHz Int16 mono on both buses and the session sampleRate=48000 -> format is correct; the playback breakage is somewhere else (e.g. AudioHandler jitter buffer behaviour, route binding, or hardware mixer). * Session sampleRate != 48000 -> we need to insert a sample rate converter or pin AVAudioSession's setPreferredSampleRate(48000) explicitly in Swift before setActive. * VPIO substituted Float32 for our Int16 request -> our render callback is writing i16 magnitudes into a Float32 buffer which would explain the distortion. Fix: write Float32 directly using data::Interleaved<f32> instead of i16. Build counter 70 -> 71. Pure diagnostic; no behavioural change.
138 lines
6.0 KiB
YAML
138 lines
6.0 KiB
YAML
name: chanora_flutter
|
|
description: "Chanora — cross-platform voice client for TeamSpeak-compatible servers."
|
|
# The following line prevents the package from being accidentally published to
|
|
# pub.dev using `flutter pub publish`. This is preferred for private packages.
|
|
publish_to: 'none' # Remove this line if you wish to publish to pub.dev
|
|
|
|
# The following defines the version and build number for your application.
|
|
# A version number is three numbers separated by dots, like 1.2.43
|
|
# followed by an optional build number separated by a +.
|
|
# Both the version and the builder number may be overridden in flutter
|
|
# build by specifying --build-name and --build-number, respectively.
|
|
# In Android, build-name is used as versionName while build-number used as versionCode.
|
|
# Read more about Android versioning at https://developer.android.com/studio/publish/versioning
|
|
# In iOS, build-name is used as CFBundleShortVersionString while build-number is used as CFBundleVersion.
|
|
# Read more about iOS versioning at
|
|
# https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html
|
|
# In Windows, build-name is used as the major, minor, and patch parts
|
|
# of the product and file versions while build-number is used as the build suffix.
|
|
version: 1.0.0-rc.8+71
|
|
|
|
environment:
|
|
sdk: ^3.11.5
|
|
|
|
# Dependencies specify other packages that your package needs in order to work.
|
|
# To automatically upgrade your package dependencies to the latest versions
|
|
# consider running `flutter pub upgrade --major-versions`. Alternatively,
|
|
# dependencies can be manually updated by changing the version numbers below to
|
|
# the latest version available on pub.dev. To see which dependencies have newer
|
|
# versions available, run `flutter pub outdated`.
|
|
dependencies:
|
|
flutter:
|
|
sdk: flutter
|
|
flutter_localizations:
|
|
sdk: flutter
|
|
intl: any
|
|
|
|
# The following adds the Cupertino Icons font to your application.
|
|
# Use with the CupertinoIcons class for iOS style icons.
|
|
cupertino_icons: ^1.0.8
|
|
flutter_rust_bridge: 2.12.0
|
|
freezed_annotation: ^3.1.0
|
|
connectivity_plus: ^6.1.0
|
|
path_provider: ^2.1.4
|
|
# audio_session 0.2.3 (MIT, Ryan Heise, 865k downloads) gives us
|
|
# programmatic access to AVAudioSession on iOS + AudioManager on
|
|
# Android. We use:
|
|
#
|
|
# * AVAudioSession.availableInputs \u2014 enumerate real input ports
|
|
# (Built-in Mic, Bluetooth HFP, wired headset, USB).
|
|
# * AVAudioSession.currentRoute \u2014 inputs + outputs of the
|
|
# active route.
|
|
# * AVAudioSession.setPreferredInput(port) \u2014 switch input
|
|
# (also drives matching output for HFP devices).
|
|
# * AVAudioSession.overrideOutputAudioPort(speaker|none) \u2014
|
|
# toggle the built-in receiver/earpiece vs speakerphone.
|
|
# * AVAudioSession.routeChangeStream \u2014 live notifications when
|
|
# the user plugs / unplugs / connects a device.
|
|
#
|
|
# This is the right primitive for a VoIP-style 'pick speaker /
|
|
# receiver / AirPods / wired' picker. Discord, WhatsApp, FaceTime
|
|
# all do exactly this. We previously tried audio_router 1.1.1
|
|
# whose iOS path is AVRoutePickerView (the AirPlay button) \u2014 the
|
|
# wrong UI: only lists AirPlay output destinations, not the
|
|
# speaker/receiver/Bluetooth choices we actually want.
|
|
audio_session: ^0.2.3
|
|
# package_info_plus 8.x (Flutter Community Plus, BSD-3, ~3M
|
|
# downloads) exposes the platform-canonical app version + build
|
|
# number at runtime so the About dialog (and any future
|
|
# diagnostic export) can display "v1.0.0-rc.8+60" sourced from
|
|
# the SAME pubspec.yaml field that drives CFBundleShortVersionString
|
|
# + CFBundleVersion on iOS and versionName + versionCode on
|
|
# Android. Single source of truth means the version on the
|
|
# iPhone screen always matches the commit that built it; no
|
|
# more "am I testing the right build?" question during the
|
|
# iOS audio test cycle.
|
|
package_info_plus: ^8.0.0
|
|
|
|
dev_dependencies:
|
|
flutter_test:
|
|
sdk: flutter
|
|
|
|
# The "flutter_lints" package below contains a set of recommended lints to
|
|
# encourage good coding practices. The lint set provided by the package is
|
|
# activated in the `analysis_options.yaml` file located at the root of your
|
|
# package. See that file for information about deactivating specific lint
|
|
# rules and activating additional ones.
|
|
flutter_lints: ^6.0.0
|
|
freezed: ^3.2.5
|
|
build_runner: ^2.15.0
|
|
|
|
# For information on the generic Dart part of this file, see the
|
|
# following page: https://dart.dev/tools/pub/pubspec
|
|
|
|
# The following section is specific to Flutter packages.
|
|
flutter:
|
|
|
|
# Generate localization bindings from lib/l10n/*.arb at build time.
|
|
# Per DEC-015 (register v0.9.5) Chanora ships English + Chinese
|
|
# Simplified at MVP with an i18n-ready architecture for additional
|
|
# languages.
|
|
generate: true
|
|
|
|
# The following line ensures that the Material Icons font is
|
|
# included with your application, so that you can use the icons in
|
|
# the material Icons class.
|
|
uses-material-design: true
|
|
|
|
# To add assets to your application, add an assets section, like this:
|
|
# assets:
|
|
# - images/a_dot_burr.jpeg
|
|
# - images/a_dot_ham.jpeg
|
|
|
|
# An image asset can refer to one or more resolution-specific "variants", see
|
|
# https://flutter.dev/to/resolution-aware-images
|
|
|
|
# For details regarding adding assets from package dependencies, see
|
|
# https://flutter.dev/to/asset-from-package
|
|
|
|
# To add custom fonts to your application, add a fonts section here,
|
|
# in this "flutter" section. Each entry in this list should have a
|
|
# "family" key with the font family name, and a "fonts" key with a
|
|
# list giving the asset and other descriptors for the font. For
|
|
# example:
|
|
# fonts:
|
|
# - family: Schyler
|
|
# fonts:
|
|
# - asset: fonts/Schyler-Regular.ttf
|
|
# - asset: fonts/Schyler-Italic.ttf
|
|
# style: italic
|
|
# - family: Trajan Pro
|
|
# fonts:
|
|
# - asset: fonts/TrajanPro.ttf
|
|
# - asset: fonts/TrajanPro_Bold.ttf
|
|
# weight: 700
|
|
#
|
|
# For details regarding fonts from package dependencies,
|
|
# see https://flutter.dev/to/font-from-package
|