mirror of
https://github.com/MobileGL-Dev/MobileGL
synced 2026-11-20 16:31:57 +09:00
[Fix] (MG_Remote, P11 T0): the T0 POST also checks what the CPU writes through the held lock after the import and its first GPU use, in both directions - Mali-G1-Ultra passed the old single round (the import cleans the CPU cache) while its GPU saw 0/1024 post-import words, so T0 was granted and create-indirect-in-world-align1024 x Magma lost every Flywheel object on inproc/spawn (0.867/0.848); it now fails there and runs T2 (0.999984), and the Redmi passes both rounds and keeps T0
This commit is contained in:
@@ -20,7 +20,7 @@ P0 已回答的不再列出(spike A 的域、spike B 的分档、`posix_spawn`
|
||||
14. **推送模型改变哪些按拉取模式调过的缓存命中率。** 幸存者容量在 P13 重调。一条线索:设备上 26.3 Espryt 的 `sve` ≈ draw 数(每 draw 重发一次 sampler-view 集合),桌面只有 ~0.07/draw;列入 P3b/P4b 优化清单。
|
||||
15. **monolith 的 `*IndirectCount` 不调 `SyncGpuWrites()` 是不是潜在缺口。** 独立 `dev` 问题,拆分不得借机顺手修。**已答(2026-09-30):是**——P8-C / P8-D 主机 red-once 证实(Espryt `*IndirectCount`、Magma `glMultiDrawArraysIndirectCount` 读到 0);split 半已修(ID-P8-9),monolith 半在 P8 第二波的 dev 包里修(ID-P8-3)。
|
||||
16. **索引宿主镜像的实际内存占用。** MC / Sodium / Iris 语料里 element-array buffer 总量未测;若显著超 64 MiB,退化路径的频率与代价必须实测。P8。
|
||||
17. **`create-indirect` fixture 在 Adreno 830 上的失败**是 `dev@81b17c0b` 就有的(基线 APK 复现),不是本分支造成;`rd12` + Magma 在两台 Adreno 830 上的 `scudo::reportMapError` 崩溃同样是 `dev` 侧。两者排除在设备 A/B 之外、留在桌面语料里;P8 要在 `create-indirect` 上断言 `roundtrips-per-frame == 0`,所以 `dev` 的修复在别人的关键路径上。
|
||||
17. **`create-indirect` fixture 在 Adreno 830 上的失败**是 `dev@81b17c0b` 就有的(基线 APK 复现),不是本分支造成;`rd12` + Magma 在两台 Adreno 830 上的 `scudo::reportMapError` 崩溃同样是 `dev` 侧。两者排除在设备 A/B 之外、留在桌面语料里;P8 要在 `create-indirect` 上断言 `roundtrips-per-frame == 0`,所以 `dev` 的修复在别人的关键路径上。**create-indirect 部分已答(2026-09-30)**:原 fixture 在 `GL_SHADER_STORAGE_BUFFER_OFFSET_ALIGNMENT` = 16 的桌面驱动上抓,Flywheel 按 16 摆 scatter 列表;Adreno 830 两后端与 Mali 的 Vulkan 要 64,1,270 次范围绑定全被 `GL_INVALID_VALUE` 拒掉。原 fixture 退役,换成派生的 `minecraft-1.21.1-neoforge-create-indirect-in-world-align1024`(**不是同一个 trace**:`tools/trace_replay/fixture_tools/realign_buffer_ranges.cpp --align 1024` 把这些绑定挪到 1024 对齐的槽,插入 3,812 个调用,目标调用 504631 → 508443;主机 SSIM 与原 fixture 9 位一致)。红米两后端 monolith / spawn 全过;Mali-G1-Ultra 上 Magma 全过(split 臂另修了 T0 POST,见 `CONTRACT-P11.md` POST 节),Espryt 仍 0.848:该机 GLES 驱动顶点阶段 SSBO 上限为 0,Flywheel indirect 的顶点程序链接不了(能力缺失,不是分离缺陷)。
|
||||
18. **split 两侧的负载平衡。** P5e 解锁出来的新问题:VD32(~3550 draws/帧)下 apply 线程 **11-12 ms**、client **15.7 ms**,**client 是瓶颈且打满 ~94%**。把工作从 client 挪到 apply 会直接降瓶颈——这在 lockstep 下毫无意义(两侧串行相加),**run-ahead 才使它成为一个杠杆**。供选:编码侧的 emitter、tracker 走查、持久映射的脏页追踪(`change_protection` 在侧写里占 1.3%)。需先重新侧写:等待消失后尾部各项的分母都变了。排在 P5e 之后;无主,2026-09-22 建议挂在路线图推完后的优化阶段,P6.5 的 2×2 矩阵车道顺带重新侧写
|
||||
19. **链路带宽预算与压缩。** TCP 终局下 `SEG_STAGE` 字节/帧对的是 Wi-Fi / USB(量级 30–100 MB/s),不是内存;`ARCHITECTURE.md` §14 的 ~1 MB/帧预算在 60 fps 是 60 MB/s,已贴着 Wi-Fi 上限。是否对 stage 载荷做 LZ4 类压缩、纹理上传是否按内容哈希在 server 侧去重,要等门 8 的分布出来再定。P6.5 契约写下第一行之前必答。
|
||||
20. **大单次上传的停顿。** 128 MiB 一次上传在 50 MB/s 上是 2.5 s;内容侧分块解决的是"装不装得下",不是"要等多久"。跨机臂上要么接受并记录,要么给上传做异步化(与 P9 的语义一起想)。不假装解决。
|
||||
|
||||
Reference in New Issue
Block a user