mirror of
https://github.com/MobileGL-Dev/MobileGL
synced 2026-11-19 07:51:57 +09:00
[Docs] (P13): W9 moves to the post-P13 perf pass as a debt, and the README records the '# P13' gate and the §1.3 cleanup.
This commit is contained in:
@@ -23,6 +23,7 @@
|
||||
| P8 转出(B):`PipeCalls.def:260` `GenerateMipmap` 仍是 `kWaitApplied`,裁定 14 的理由(CPU 滤波碰 client 影子)已不成立,可改 `kWaitNone` | 性能工作(协议行为变更,需单独裁定) |
|
||||
| P8 转出(C):server SSBO 标记过近似(窗口内每个绑定的 SSBO 都标);一个留在 SSBO 绑定上又当 restart EBO 用的 buffer 每次 draw 都回读 | 性能工作 |
|
||||
| P13 转出(W5 翻转后,ID-P13-2 记录项,用户裁定记为债务):Magma monolith 走记录臂比前端臂慢约 16%——Y700 上 FCL MC 1.21.5、RD2 小场景、时钟未钉:记录臂 168 / 176 fps,同库强制前端臂 206 / 204 fps,即每帧 CPU 约 5.8 ms 对 4.9 ms(渲染线程都约占满一核);Espryt 持平(224 / 226 对 222)。疑因:`VulkanRenderer::SetupDraw` 在记录臂直接进 `SetupWireDraw`,绕过只在前端臂跑的 `TrySetupDrawFastPath`(PLAN-P13 §1.3 已提示「换臂前先量」)。W6 删前端臂后这部分成本固定下来 | P13 收官后(用户裁定:P13 内不做性能工作):性能工作的「之前」基线是 `dev` 分支构建(pull monolith),不是 W6 前的 feat 构建;在设备上钉时钟对比 dev 与 feat,场景为 FCL MC 与 anland glmark2,两个后端都测;再用 simpleperf profile Magma monolith 每 draw 成本,决定是否给 wire draw 臂补快路径 |
|
||||
| P13 转出(W9,用户裁定:P13 内不做性能工作):缓存容量重调(CSO / 描述符 / 管线缓存容量按 `MOBILEGL_PIPE_STATS` 读数定初值、设备复核)未做,容量仍是 P8 时的值 | P13 之后的性能轮:以 `dev` 构建为基线(同 Magma 16% 那行),先在主机语料取 `MOBILEGL_PIPE_STATS` 读数定初值,再在设备上钉时钟复核 |
|
||||
| P13 转出(FCL 浸泡,用户裁定:FCL 暂不改、MobileGL 不做规避):FCL game process can die silently (exit SIGNALED status=34, SIGRTMIN+2): the JVM signal reset after renderer selection drops libcore's AsynchronousCloseMonitor handler, and FCL's okhttp/Okio watchdog then kills the process; renderer-independent (reproduced on P12 and P13 libraries, both backends; untested with other renderers)。浸泡:P13 库 30 次(Magma 22 / Espryt 8)死 18 次、P12 库 10 次死 2 次;P12 / P13 逐次交替的对照(同场景同网络时段)P12 4/10、P13 2/10,时间线(`Renderer:` 行到 MobileGL 首行约 6.2 s、晚死固定在其后约 9.4 s)两库相同,无证据表明 MobileGL 拉高概率;全部 status=34,无 tombstone、无 kgsl;证据与机理见 [`p13/fcl-soak/README.md`](p13/fcl-soak/README.md) | fix belongs in FCL (save/restore libcore's SIGRTMIN+2 sigaction around JVM creation); left for the user |
|
||||
| P8 转出(monolith,ID-P8-13):9 条 monolith 缺陷真实内容 0 命中,不在 dev 上修——Espryt `*IndirectCount` / 原生 indirect `gl_BaseVertex` / fp64 收窄读未同步影子;Magma `glMultiDrawArraysIndirectCount` CPU 臂同病;Magma 录制中途 `SyncGpuWrites` → SIGSEGV;Espryt RGB16F / RGB32F CPU 滤波读陈旧影子、R11F / 深度链无视 BASE / MAX;Magma 无 BLIT 颜色格式缺着色器 mip 臂;Espryt 拷贝后 `glGetTexImage` 读拷贝前影子(证据见 `notes/p8/{B,C,D,E}.md`) | P13(monolith 换到已修好的记录臂) |
|
||||
| P8 转出(monolith,feat,ID-P8-14):feat 的 monolith 臂每次 indirect draw 在命令缓冲有 GPU 写时整 buffer 同步回读(`SyncClientSideVertexArraysForIndirectFetch`,`62bfe461`,dev 无);Magma 的 split 构建 monolith 深度 mip 不传 view 类型,无深度 `BLIT_DST` 的设备上 1D 深度链会拿到 2D view(推断,Release 下断言编译掉,SV) | P13(monolith 换臂) |
|
||||
|
||||
Reference in New Issue
Block a user