- README, ARCHITECTURE, ROADMAP, MEASUREMENTS and CURRENT_STAGE_PROGRESS are rewritten as indexes
(84 KB -> 15 KB): what the project is, where it stands, and where each detail lives. ROADMAP is one
plain sentence per phase; MEASUREMENTS is the five conclusions that matter plus one line per phase;
CURRENT_STAGE_PROGRESS is the P12 goal, a checklist and the next steps.
- ARCHITECTURE's body moves unchanged into ten design/ files, keeping §1-§17 and appendices A/B, so
`ARCHITECTURE.md §N` references in code resolve through the table in ARCHITECTURE.md.
- guide/ holds build-and-run, code map, glossary and the engineering discipline (from README and
ROADMAP), and the device pinning record that used to sit in devices/.
- The open-debt table moves to notes/DEBTS.md; the detailed current-stage tables (with decision IDs,
the open line items and evidence locations) move into notes/p12/README.md. notes/README.md maps
every moved path and section.
- The documentation citation lint in test.yml also covers design/ and guide/, which describe the
current tree as the top-level files did.
- measured with one block removed at a time: without the re-applied block both server halves drop to 1 (DirectGLES 1 / DirectVulkan 1, both entries red); without the first block DirectVulkan drops to 1 (red) while DirectGLES stays at 2 (green), because the GLES backend reads the pack field twice after the neutral pack is installed (3 = the saved-pack read + 2 post-install) and DirectVulkan once (2 = 1 + 1)
- so the >= 2 requirement falsifies the re-applied block on both backends and the first block on DirectVulkan; the CI step runs both backends and needs both, which it already does
- the scenario, hook and CI comments now say exactly that, instead of "removing either block drops it to 1"
- the server reads GetPixelStoreParameters twice inside the ReadPixels window - PipeApplier::read_pixels saves the application's pack through the accessor before it installs the neutral one, and the backend's ReadPixels reads the field after - and both reads sit inside ServerReadsInsideTheNeutralPackWindow; the hook's first perturbation is what turns the saved-pack read red (past the first compare the application's pack differs from the neutral oracle on its own), and only the perturbation re-applied after the window's overwrite can turn the post-install read red, because there the stored value is the neutral pack
- so a control that accepted ONE `where=read` line was satisfied by either block alone and falsified neither: the second block, which protects the lane's post-install backend reads, had no falsifier
- CorruptedFieldIsReportedOnTheServerRead now counts the `where=read` reports for the field in the server half since its mark and requires at least two; the CI read-side step does the same with grep -c; both block comments in the hook say which read each turns red
- measured on the host: both entries green, server half DirectGLES 3 / DirectVulkan 2; removing only the second block rebuilds green and turns both entries red with exactly one report per server half (1 / 1, ctest rc 8); the file was restored byte-identical and rebuilt
- the revision is a hand-bumped integer mixed into wireFingerprint and nothing tied it to protocol.fbs's content; scripts/ci/protocol_revision_pin.py holds {revision -> sha256(protocol.fbs)} in protocol_revision_pins.json and refuses a schema whose digest is not the current revision's, or a revision with no row
- registered as ProtocolSchema.RevisionPinsDigest (label unit, MG_Test/Wire/CMakeLists.txt, --self-test proves both perturbations red before it says green) and as a step of CI's flatc-check job, the one that regenerates the header on every schema edit
- --write records a bump's row and refuses to re-pin an existing revision to a different digest, which is what a schema edit without a bump looks like
- mg_protocol_base.h says where the pin lives beside the revision it pins
- red-once: protocol.fbs touched with one trailing comment, revision left at 1 -> "protocol.fbs has sha256 a7b5c7fb... but MOBILEGL_PROTOCOL_CONTROL_REVISION is still 1, which is pinned to 7fc859f7..." rc=1; restored, green
- both negative-control steps re-run 12 ambient VerifySplit. entries with a knob exported, and an ambient entry writes to its own per-entry path under verify-split-logs/ which the library opens "w" - so the upload at the end of the job collected twelve CONTROL logs sitting under the LANE's names
- if: always() made it worse rather than better: a failure investigation is exactly when the overwritten half is the half somebody needs
- the arm proof is now followed by a cp -a to verify-split-logs-lane/ (plus the lane's JUnit), and the upload takes both trees - the green run the arm proof read, and whatever the controls left behind
- the landing shape was a count - at least 850 armed of at least 1000 client logs - which leaves the remaining 155 unnamed: the lane could lose fifty arms, gain fifty skips, and the floor would not move
- the rule is now per entry and two-sided, the one dualblock-expected-fatals.txt already rides: each client log must carry the arming line, or belong to an entry ctest reported SKIPPED, or be named in the new Harness/verify-split-unarmed-expected.txt
- a gtest skip is the recognised no-verb marker and is NOT named, because the skip set moves with the driver - naming it would ratchet on lavapipe rather than on the comparator
- both other directions fail: a listed entry that armed, and a listed name with no client log in this run
- split_log_paths.py gains the verify-split-arming mode; the lane step gains --output-junit so a skip can be told from a pass; test_split_log_paths.py gains six controls covering the four ways the census can be wrong
- measured on the host over 1064 private client logs: 909 armed, 99 unarmed and skipped, 56 unarmed and named in five classes - caps/limits/extension advertisement 22, shader and program object surfaces 16, object state written and read back or a call rejected before it becomes a verb 14, framebuffer completeness queries 2 (DirectGLES only; DirectVulkan skips both), the poison parent that only forks 2
- MGPipeVerifyReadHook honours MOBILEGL_PIPE_VERIFY_CORRUPT: it perturbs the ORACLE after CopyField, and AGAIN after the ID-49 neutral-pack overwrite, because that overwrite replaces the pack half wholesale and CorruptStorage perturbs an array's element 0 - which is the pack half
- until now the knob only ever reached EntryCompare, so every red it could produce was the client thread's where=entry and the hook that runs on the server's apply thread at every backend read had no falsifier at all
- new entry per backend, DirectGLES/DirectVulkan.VerifySplitReadCorrupted., with CORRUPT=GetPixelStoreParameters and VERIFY_FATAL=0 - the field is in the kReadback fill mask, so the client entry compare would otherwise abort the process before the server reached the read
- the case reads the SERVER role's half of its private log alone: with the knob armed a union search over both halves would be satisfied by the arm that is not under test
- PipeStatsWindow.h gains ReadServerLogSince for that
- test.yml grows the matching control step - run the two entries, then re-read both server halves from outside for the where=read report
- measured: 2/2 green, server halves 3 and 2 lines, client halves 0 lines; revert-and-run with the two corruption blocks removed gives 2/2 red and both server halves 0 lines
- the lane goes 1070 to 1072
Fable review of the B3 rework, should-fix: the audit had no negative
control, so a green run could not say it would have been red. It now takes
--self-test, which writes each inline fixture as a one-file renderer tree in
a temp dir, runs the audit on it and checks both the rc and the line the
audit must print (so a red is red for the fixture's reason):
comment-only site (//) -> rc 1, "has NO SITE"
comment-only site (/* */) -> rc 1, "has NO SITE"
string-literal site -> rc 1, "has NO SITE"
other-branch log -> rc 1, "with no MGLOG_W/E in its own block"
nested-branch log -> rc 1, same
log only in a /* */ comment above -> rc 1, same
nearest log is MGLOG_D -> rc 1, same
good sites (AT form, bare Count under
its own MGLOG_E_ONCE, def row with a
trailing comment) -> rc 0, "0 unlogged, 0 unknown"
8/8, rc 0. Mutants: with the strip disabled 5 of 8 fail (the four
comment/string reds go green and the good fixture's commented row is
lost); with the old 8-line window in place of the block walk 2 of 8 fail
(other-branch, nested-branch). Against the audit as it stood at aab01275,
six of the seven red fixtures passed and the good one failed.
.github/workflows/test.yml: the "Wire declines audit (B3)" step runs
--self-test and then the tree audit, the way the next step runs
trace_cases.py --self-test-transport-matrices before it computes matrices.
The B3 review (ID-P7-34) counted 12 of the 52 rows with no site at all -
TexViewFormat, TexNoApplierRecord, TexRecordDeadOrStale and the nine Shape*
rows were declared and never counted - and ten sites that counted with no (MGLOG_D included)
line, so "a name, a tally and a decline line" did not describe the tree.
- SyncWireTextureShape: all nine Shape* exits now count; the ViewOf exit
and the preserve-flush exit were bare `return false` and are now
MGL_WIRE_DECLINE_AT; the image-flags exit logged only MGLOG_D, which a
Release build compiles away, and is promoted likewise.
- The preserve-copy exit was the one Shape exit with no row: appended as
ShapePreserveCopyFailed (rows are append-only), 53 rows.
- SyncTextureResourceByHandle / UploadPendingWireLevels: the count-only
sites without a log of their own are promoted to MGL_WIRE_DECLINE_AT;
the ones already under a W/E _ONCE line keep that line and gain the count.
- scripts/ci/wire_declines_audit.py: fails on a row with no site, a site
naming no row, or a bare Count() with no MGLOG_W/E within 8 lines above
it. WireDeclineTally.h (the macro's definition) is not a site. Wired into
the job that runs the fatal census.
Audit before: 52 rows, 40 with sites, 10 unlogged under the W/E rule (rc 1). After: 53 rows,
53 with sites, 0 unlogged (rc 0). Forced red (ShapeNoVkFormat made true for
1x1 textures, reverted): Split.Fm.F1WireScenario.VertexIdSampler... fails on
pixels with ShapeNoVkFormat=2 / TexShapeSync=2 in the shutdown tally.
swung0x48
Swung0x48