#!/usr/bin/env bash # 21-preflight.sh [--reboot] [--no-pin] # # Session start (runbook 1 section 2, CONTRACT-P7 7.2 "same reboot-clean session"): # --reboot records boot_id, reboots, waits for boot_completed, records boot_id again; the two # must differ or the window is NOT reboot-clean. Gate 3 requires it; the dry run # does not reboot. Refused while gate3/state holds finished pairs (they belong to # the old session). session/boot-id.txt is THE session every gate-3 record must match; # without --reboot on a stamp that already has session/boot-id.txt: a resume - the phone must # still be in that boot session (else stop), and boot-id.txt / reboot-clean.txt are # kept, not rewritten (session/resumed.txt logs the re-entry); # records the state 90-restore.sh puts back: TCP supervisor up or not, stay-on setting, pin # state, Doze whitelist line, focused activity; # wakes the phone and sets `svc power stayon true` (息屏 cut child TCP in window 1b, ID-P7-48); # pins (pin_device.sh pin) unless --no-pin, then classifies `check` (PINNED-1100 = the board's # documented 1100 MHz pwrlevel-0 reading, accepted); # checks the CTS bundle is on the device and there is room to work. set -uo pipefail . "$(dirname "$0")/lib.sh" [ $# -ge 1 ] || die "usage: $0 [--reboot] [--no-pin]" STAMP=$1; shift REBOOT=0; PIN=1 for a in "$@"; do case "$a" in --reboot) REBOOT=1;; --no-pin) PIN=0;; *) die "unknown option $a";; esac; done w2_load_build "$STAMP" OUT=$(w2_out "$STAMP")/session mkdir -p "$OUT" w2_require_device w2_lock t0=$(date +%s) # ---- what we found (only the FIRST preflight of a stamp writes these: restore reads them) --- if [ ! -f "$OUT/found.env" ]; then sup=0; w2_supervisor_running && sup=1 stayon=$(Ash "settings get global stay_on_while_plugged_in") pinstate=$(w2_pin_check "$W2_TOOLS" "$OUT/pin-found.txt") cat > "$OUT/found.env" < "$OUT/deviceidle-found.txt" || true Ash "dumpsys window" | grep -E 'mCurrentFocus' > "$OUT/focus-found.txt" || true Ash "ps -A -o PID,PPID,USER,NAME,ARGS" | grep -iE 'mobilegl|mglsrv' > "$OUT/processes-found.txt" || true log "found: supervisor=$sup stayon=$stayon pin=$pinstate" fi SESSION_BOOT=$(w2_session_boot_id "$STAMP") if [ $REBOOT -eq 1 ] && compgen -G "$(w2_out "$STAMP")/gate3/state/*/*.done" > /dev/null; then die "gate 3 has finished pairs from boot session ${SESSION_BOOT:-?}; --reboot starts a NEW session and would void them (60-reduce.py: INVALID-SESSION). Delete them first (RUNBOOK section 1 'phone rebooted') or use a new stamp" fi if [ $REBOOT -eq 1 ]; then Ash "cat /proc/sys/kernel/random/boot_id" > "$OUT/boot-id-before.txt" log "rebooting for a reboot-clean session" A reboot sleep 20 A wait-for-device for _ in $(seq 1 120); do [ "$(Ash 'getprop sys.boot_completed')" = 1 ] && break; sleep 2; done sleep 20 # File-based encryption: the app's data dir (where trace-replay-ci.sh copies each fixture with # run-as) is readable only after the first unlock. A phone with a lock-screen credential needs # one manual unlock here; wait up to 10 minutes for it rather than failing every case. w2_wake for i in $(seq 1 120); do [ "$(Ash 'getprop sys.user.0.ce_available')" = true ] && break [ $i = 1 ] && log "waiting for credential-encrypted storage: UNLOCK THE PHONE BY HAND if it shows a lock screen" sleep 5 done [ "$(Ash 'getprop sys.user.0.ce_available')" = true ] || die "user 0 storage still locked after 10 min" fi if [ $REBOOT -eq 0 ] && [ -n "$SESSION_BOOT" ]; then # Re-entering this stamp's session (window.sh after 90-restore.sh ran with steps still open, or # by hand): the phone must still be in it, and boot-id.txt / reboot-clean.txt stay as the # session's first preflight wrote them. Stay-on and the pin are set again below. w2_same_session "$SESSION_BOOT" "preflight (resume of $STAMP)" echo "resumed $(date -Is): boot_id $SESSION_BOOT unchanged ($(cat "$OUT/reboot-clean.txt" 2>/dev/null))" | tee -a "$OUT/resumed.txt" else Ash "cat /proc/sys/kernel/random/boot_id" > "$OUT/boot-id.txt" if [ $REBOOT -eq 1 ]; then if cmp -s "$OUT/boot-id-before.txt" "$OUT/boot-id.txt"; then die "boot_id unchanged: the reboot did not happen"; fi echo "reboot-clean: $(cat "$OUT/boot-id-before.txt") -> $(cat "$OUT/boot-id.txt")" | tee "$OUT/reboot-clean.txt" else echo "NOT reboot-clean (no --reboot): boot_id $(cat "$OUT/boot-id.txt"), up $(Ash 'cat /proc/uptime' | cut -d' ' -f1)s" | tee "$OUT/reboot-clean.txt" fi fi w2_wake Ash "svc power stayon true" Ash "dumpsys power" | grep -E 'mWakefulness=|mStayOn=' > "$OUT/power.txt" Ash "dumpsys deviceidle get deep" > "$OUT/deviceidle-deep.txt" 2>&1 || true { echo "model : $(Ash 'getprop ro.product.model') / $(Ash 'getprop ro.board.platform')" echo "build : $(Ash 'getprop ro.build.fingerprint')" echo "battery : $(Ash 'dumpsys battery' | grep -E 'level|temperature|AC powered|USB powered' | tr -s ' ' | tr '\n' ' ')" echo "memory : $(Ash 'grep -E "MemTotal|MemAvailable" /proc/meminfo' | tr -s ' ' | tr '\n' ' ')" echo "tmp free : $(Ash 'df -h /data/local/tmp' | tail -1)" echo "mgcts : $(Ash "ls $W2_CTS_DEV 2>&1" | tr '\n' ' ')" echo "apk : $(grep versionName "$(w2_out "$STAMP")/session/apk-install.txt" 2>/dev/null | tr -d ' ')" } | tee "$OUT/device.txt" if [ $PIN -eq 1 ]; then bash "$W2_TOOLS/tools/device_bench/pin_device.sh" "$W2_SERIAL" pin > "$OUT/pin-session-start.txt" 2>&1 echo 1 > "$OUT/pinned-by-window" fi pin=$(w2_pin_check "$W2_TOOLS" "$OUT/pin-check-00.txt") log "pin: $pin" if [ $PIN -eq 1 ] && [ "$pin" != PINNED ] && [ "$pin" != PINNED-1100 ]; then die "pin did not take ($pin, see $OUT/pin-check-00.txt)" fi w2_timing "$(w2_out "$STAMP")" preflight "$t0" "$(date +%s)" "reboot=$REBOOT pin=$PIN" log "=== PREFLIGHT OK $STAMP ==="