# Device profile: Oppo / ColorOS, Mali GPU, adb serial 3B159D009VZ00000.
#
# The second of the two devices the disaggregation campaign is measured on (the other is
# devices/xiaomi-adreno830.env). Same purpose: keep the pinning and thermal protocol in the
# repository rather than in one operator's shell history.
#
# ============================ NOT YET DEVICE-VERIFIED ============================
# PROFILE_VERIFIED=0, and bench.sh / session.sh refuse to run against it - or against a profile
# that omits the key - unless --allow-unverified-profile is passed. (profile.sh only records a
# simpleperf profile and pins nothing, so it carries no such guard.) This part is a MediaTek SoC, so unlike the Adreno
# profile the harness's existing /proc/ppm + /proc/gpufreq pin path is probably the right one -
# but "probably" is exactly the state a measurement profile must not ship in. The cluster
# indices, the available OPPs, the top GPU OPP and the thermal zone TYPE all differ between
# MediaTek generations, and odinlite.env's values are for an MT6877, not for this device.
#
# To promote it: read the four TODO fields off the device
# (`cat /sys/devices/system/cpu/cpufreq/policy*/scaling_available_frequencies`,
# `cat /proc/gpufreq/gpufreq_opp_dump`, `for tz in /sys/class/thermal/thermal_zone*; do
# echo "$tz $(cat $tz/type)"; done`), run one pinned window, check big_cur/little_cur/gpu_cur_khz
# in the result JSON against the pins, then set PROFILE_VERIFIED=1.
#
# ColorOS traps that belong with this device, and cost a run each when forgotten:
#   * the first install of a not-yet-installed package blocks on
#     com.oplus.appdetail InstallGuideActivity until "continue install" is tapped
#     (`input tap 353 2349` on the 1272x2772 panel);
#   * a foreign-signed APK has to be uninstalled before a rebuild will install;
#   * pass MSYS_NO_PATHCONV=1 on every adb invocation from Git Bash, or a /data/... argument is
#     rewritten into a Windows path.
# =================================================================================
PROFILE_VERIFIED=0
PIN_STYLE=ppm

DEVICE_SERIAL=3B159D009VZ00000

# Campaign protocol constants (perf-test-protocol): big 1.96 GHz, little 1.55 GHz, GPU at its
# top OPP, 40 C start gate. As above, the kHz values are the protocol's targets and the nearest
# actual OPP has to be confirmed on the device.
CPU_BIG_POLICY=TODO_VERIFY_ON_DEVICE
CPU_BIG_FREQ=1958000
CPU_LITTLE_POLICY=TODO_VERIFY_ON_DEVICE
CPU_LITTLE_FREQ=1550000

# MediaTek legacy gpufreq, same node family as odinlite. The top OPP is device-specific.
GPU_PIN_KHZ=
GPU_UTIL_NODE=/sys/kernel/ged/hal/gpu_utilization
GPU_CURFREQ_NODE=/sys/kernel/ged/hal/current_freqency

THERMAL_ZONE_TYPE=TODO_VERIFY_ON_DEVICE
THERMAL_START_MAX_MC=40000