Files
MobileGL/docs/Disaggregated/guide/pin-verification-2026-09-07.md
T
swung0x48 0fe015886e [Docs] (Disaggregated): the top-level files become short indexes in plain language; the design text moves to design/, the how-to and reference material to guide/
- README, ARCHITECTURE, ROADMAP, MEASUREMENTS and CURRENT_STAGE_PROGRESS are rewritten as indexes
  (84 KB -> 15 KB): what the project is, where it stands, and where each detail lives. ROADMAP is one
  plain sentence per phase; MEASUREMENTS is the five conclusions that matter plus one line per phase;
  CURRENT_STAGE_PROGRESS is the P12 goal, a checklist and the next steps.
- ARCHITECTURE's body moves unchanged into ten design/ files, keeping §1-§17 and appendices A/B, so
  `ARCHITECTURE.md §N` references in code resolve through the table in ARCHITECTURE.md.
- guide/ holds build-and-run, code map, glossary and the engineering discipline (from README and
  ROADMAP), and the device pinning record that used to sit in devices/.
- The open-debt table moves to notes/DEBTS.md; the detailed current-stage tables (with decision IDs,
  the open line items and evidence locations) move into notes/p12/README.md. notes/README.md maps
  every moved path and section.
- The documentation citation lint in test.yml also covers design/ and guide/, which describe the
  current tree as the top-level files did.
2026-09-24 22:39:46 +00:00

3.6 KiB
Raw Blame History

设备定频档案与核验

本分支性能 A/B 所用设备的定频方式与核验结果。规则:每次运行前后各跑一次 pin_device.sh <serial> check,DRIFT 的运行作废重跑;stock 值硬编码、不从已钉设备采样(否则一次 restore 会把钉频变成永久);温度门 40 °C;reboot-clean、同热窗口、两臂背靠背。

当前战役设备(2026-09-11 起,P4a 之后唯一用于 A/B 的设备)

设备 SoC / GPU 大核 小核 GPU 备注
Redmi M332BF 2f7cbe2e SM8750 / Adreno 830v2 policy6 → 1958400(stock 1017600–3072000) policy0 → 1555200(stock 556800–2745600) kgsl min/max_pwrlevel = 0;2026-09-11 实测 1050 MHz(厂商 thermal_pwrlevel 锁 1),2026-09-16 起实测 1100 MHz 主动风扇 /sys/class/xm_power/hw_monitor/pwm_fan 恒 level 2,用例间降温 <1 min;温度门 cpuss-0-0

与小米 35d0befa 同 SoC、同 OPP 表,两台的钉频数值可比;跨钉频口径(1050 vs 1100 MHz)的活动不可比钟频,只有同场配对可比。Redmi 的行已于 P6 收尾(2026-09-22)并入树内 tools/device_bench/pin_device.sh(2f7cbe2e 条目;stock 范围与小米不同,GPU 实测钳在 1050 MHz:thermal_pwrlevel 写 0 读回 1,见 ../notes/p6/README.md §12.7);此前它只在树外的 ~/w7/notes/p2/devices/pin_device.sh。

2026-09-07 核验:小米 35d0befa 与 Oppo 3B159D009VZ00000(P2 / P3a 使用)

结论:bench.sh 的 /proc/ppm + /proc/gpufreq 钉法在两台上都不存在(MT6993 已改 /proc/gpufreqv2/),所以用 bench.sh --no-pin + tools/device_bench/pin_device.sh <serial> pin|unpin|check(纯 adb + su;exit 0 PINNED / 1 DRIFT / 2 UNPINNED,UNPINNED 非零使 check && measure 不可能量到未钉设备)。devices/*.env 的 PROFILE_VERIFIED=1 只认证文件里的节点与钉值,不认证 bench.sh 能驱动它们;给 bench.sh 加 PIN_STYLE 仍未做。

小米 24129PN74C(SM8750 / Adreno 830v2) Oppo PLG110(MT6993 / Mali,gpufreqv2)
大核 policy6 → 1958400(精确 OPP;stock 1017600–2841600) policy4 → 2000000(最近 OPP,+2.1%;stock 300000–3500000,厂商守护随后改回 3200000)
小核 policy0 → 1555200(精确;stock 556800–2745600) policy0 → 1600000(+2.9%;stock 300000–2100000)
额外 — policy7(单核 4.21 GHz)同钉 2000000,否则一个热线程就打破钉频
方法 scaling_min_freq = scaling_max_freq = 目标;governor(walt / sugov_ext)不动;写序 min→cpuinfo_min_freq、max→目标、min→目标(min 高于当前 max 会被 cpufreq 钳住) 同左
GPU kgsl-3d0/{min,max}_pwrlevel = 0 → 1100 MHz(devfreq 路径封顶 1050);gpuclk 单位是 Hz /proc/gpufreqv2/fix_target_opp_index = 0 → 1716000 kHz,恢复写 −1;不用 ged custom_*(取 OPP 下标、且被 urcc-service 争写)
温度门 cpuss-0-0(zone13),idle 34.7 °C soc_max(zone14),idle 36–37 °C,门只勉强可达
30 s 八路负载核验 7 个样本零漂移,47 → 52 °C 7 个样本零漂移,53 → 62 °C
陷阱 gpubusy 打的是周期数,busy 百分比读 gpu_busy_percentage scaling_governor/min/max 是 0660 system,必须经 su 读,否则空值看起来像在工作

两台核验后均已解钉并复核 UNPINNED,写过的节点全部恢复。未核验:Oppo GPU 钉在图形负载下的实际时钟(核验窗口 GPU 处于 power-collapse)、整场 bench 窗口内的钉频持久性、重启后状态、厂商热管理介入。