P3b/P4b deepening, landing under the P7 program (PLAN-PH-P34B-P7.md 1.2, wave 2-D
package D2). The code half of "按存储属主键控的发射游标与 view 索引重映射" landed in
P4a/P5e; this is the verification half it never had.
TextureViewAliasScenario, four cases: an upload through a layer-restricted view
sampled through the owner and the reverse, each once and again across draw
boundaries so the drain runs three times. Each case asserts on TWO channels at
once - sampled texels AND MGPipeTextureEmitter's SubDataCount / RefusedSubDataCount
/ DrainListSize, read through the new Harness/TextureEmitPeek. The counters are the
load-bearing half: a level that never made it onto the drain list is still uploaded
by the next whole-level respecify, by a glGenerateMipmap or by the monolith sync
path, so the picture comes out right one frame late and a pixel-only case goes green
over the regression on most trees.
Registered in the three GLES split arms, and MOBILEGL_ESPRYT_ENABLE_TEXTURE_VIEW=1
added to MGL_ITEST_GLES_{SPLIT,SPAWN,TCP,TCPDEVICE}_ENVIRONMENT - views are Espryt's
opt-in and without it every case green-skips. The Tcp arm needed the knob on the
TcpServer.Start fixture as well: that lane's server is pre-started rather than
spawned from the client, so it withheld GL_ARB_texture_view and all four cases
SKIPPED while the identical Split and Spawn arms ran.
Red-once (R-16): TextureObjectView::MarkStorageDirtyRegion made to call
PipeNoteLevelDirty on ITSELF instead of forwarding to the storage owner - the
two-cursor shape. TheViewUploadDrainRunsAgainAfterADrawBoundary goes red on both
channels simultaneously (stale owner texels AND SubDataDelta() == 0). The plan
predicted case (a); it is (c) that reds, because the first drain of a texture's life
carries the whole level anyway - recorded in the note.
TheOwnerUploadDrainRunsAgainAfterADrawBoundary is EXCLUDED BY NAME from the split
arms: it is red on all three transports and green under monolith, because an
owner-side resource_subdata moves only the owner's record.Serial and nothing
propagates that to the records viewing it. Cause and the two candidate fix sites are
named in the CMake comment and in notes/p34b/espryt-d2.md. The name stays in every
lane (G14).
5.9 KiB
P3b/P4b wave 2-D package D2 — the Espryt stream, part 2
The verification gates P3b/P4b owes, plus the texture / program split-scenario census.
Base 7ed5da52 (feat/disaggregated), worktree ~/w7/p7-espryt-d2, branch p7/espryt-d2.
Package D1 owns MG_Backend/DirectGLES/{DirectGLES.cpp,Managers.cpp}, the XFB/readback
scenarios and their split-arm registrations. Nothing here touches those; every
MG_IntegrationTest/CMakeLists.txt edit sits in a block headed package D2.
Slice 1 — TextureViewAliasScenario
The verification half of "按存储属主键控的发射游标与 view 索引重映射". The code half landed in
P4a/P5e: the drain cursor is owner-keyed (MG_Impl/Pipe/TextureEmit.h, NoteLevelDirty +
DrainTextureSubData), the index remap is TextureObjectView::ToOwnerLevel /
ToOwnerUploadTarget / ToOwnerRegionOffset, the wire half is MGPSamplerView +
MGPResourceDesc::ViewOf.
Four cases, each asserting on TWO channels at once — sampled texels AND
MGPipeTextureEmitter::SubDataCount() / RefusedSubDataCount() / DrainListSize(), read through
the new Harness/TextureEmitPeek.{h,cpp}:
| case | direction | drains |
|---|---|---|
SubImageThroughAViewIsSampledThroughTheOwner |
view upload → owner sample | 1 |
SubImageThroughTheOwnerIsSampledThroughTheView |
owner upload → view sample | 1 |
TheViewUploadDrainRunsAgainAfterADrawBoundary |
view upload → owner sample | 3 |
TheOwnerUploadDrainRunsAgainAfterADrawBoundary |
owner upload → view sample | 3 |
Red-once (R-16)
TextureObjectView::MarkStorageDirtyRegion patched to call PipeNoteLevelDirty on ITSELF instead
of forwarding to the storage owner — the two-cursor shape the design rejects.
DirectGLES.TextureViewAliasScenario.TheViewUploadDrainRunsAgainAfterADrawBoundary FAILED
the first view write, through the owner: 11408 of 11408 pixels disagree;
first at (2, 2) is rgba(50,160,30,255), expected rgba(255,0,255,255)
Expected: (window.SubDataDelta()) > (0u), actual: 0 vs 0
the SECOND drain (first view write after a draw boundary): the client texture emitter
described 0 texture(s) across this draw and put NO resource_subdata on the wire.
... and the same pair again for the THIRD drain.
Both channels red simultaneously, which is the property the file was written for: stale texels AND a drain that emitted nothing.
Deviation from the plan's prescription, recorded rather than papered over. The plan says "case (a) must go red". It does not — case (c) does. Case (a) creates the texture, writes through the view and drains ONCE, and that first drain of a texture's life carries the whole level anyway (the storage definition already marked it dirty), so a cursor keyed on the wrong object still ships the right texels by accident. It is the SECOND and THIRD drains, where only the sub-region written since the last validate point is owed, that can lose a record. Cases (c)/(d) exist for exactly that and are where the red lands. The scenario header states this; case (a) is kept because it is the cheapest statement of the remap itself.
A defect this slice FOUND: owner writes are invisible through a sampled view under split
TheOwnerUploadDrainRunsAgainAfterADrawBoundary is red on inproc, spawn and tcp, green under
monolith, on the unmodified tree.
Once a view has been SAMPLED, a later glTexSubImage through the OWNER's own name never becomes
visible through the view. The client half is provably correct — the case's own counter assertions
pass, so the records were emitted and the applier accepted them.
- The server's per-texture clean gate
BackendTextureObject::IsDrawSyncCleanByRecord(Managers.cpp:15433) compares the VIEW'srecord.Serialandrecord.PendingUploads. - An owner-side
resource_subdatamoves only the OWNER's (MG_Pipe/PipeApply.cpp:1175). - Nothing propagates a serial bump from a storage owner to the records that view it.
MGPResourceDesc::ViewOfis a forward edge with no reverse index, and the applier reads it only in the descriptor-equality helper (PipeApply.cpp:666). - Under monolith the same gate reads
GetContentVersion()THROUGH the view, whichTextureObjectViewforwards to the owner (TextureObjectView.cpp:100-102). The split gate has no equivalent of that forwarding. MG_Remote/CONTRACT-P5E.md:387-395states the split gate in full and has the same hole, so the implementation is faithful to the contract. The contract is what is wrong.
KHR-GL43.texture_view.coherency is exactly this test and reads Pass in the CTS baseline — which
is a monolith reading (notes/p7/device-window-1/CTS-base/README.md:16).
Not fixed here. The fix is either at the gate (Managers.cpp — package D1's file) or at the
publisher (MG_Pipe/PipeApply.cpp's ApplyTextureUpload, outside D2's declared footprint), and
the publisher-side form needs either an O(#texture records) scan per resource_subdata or a new
reverse index on MGPipeResourceRecord — a design decision with a contract amendment attached.
The case is excluded by name from the three split arms with the cause stated in the CMake
comment, kept in the monolith lanes where it is the regression net for the forwarding that works,
and listed in split-scenario-census.md. G14: the name still exists in every lane.
The tcp arm was green-skipping everything
MOBILEGL_ESPRYT_ENABLE_TEXTURE_VIEW=1 on MGL_ITEST_GLES_TCP_ENVIRONMENT is not enough: the tcp
lane's server is pre-started by the TcpServer.Start fixture, not spawned from a client that
carries the lane environment, so the server withheld GL_ARB_texture_view and all four cases
SKIPPED while the identical Split and Spawn arms ran. Fixed by putting the knob on the fixture
entry's own ENVIRONMENT property (tcp_server_fixture.py builds the supervisor's environment
from os.environ and strips only the transport keys). A feature knob that reaches two arms of
three is the worst of the three states: the lane is green and tests nothing.