ios_voice_unit.rs:1033: change the condition from `mix_stats.peak_i16 == 0` to `mix_stats.peak_i16 == 0 && !muted`. When the user mutes the channel via output_muted, the downmix helper fills the output buffer with silence (peak = 0), which previously falsely incremented the output_underrun counter. The mute toggle is intentional silence, not a real underrun.
Note: this does not address the separate false positive where peak_i16 == 0 with output unmuted but no audio incoming (e.g., just joined a channel with no remote speaking). A complete fix would require tracking whether the audio handler actually produced data; deferred to a follow-up.
* feat(voice): unified mobile voice bar with gesture-isolated PTT row
Replace separate VoiceStatusChip + VoicePttButton with a single
CompactVoiceBar widget that combines both into a two-row layout:
- Control row (tap): status text, mute, deafen, settings chevron
- PTT row (hold): full-width hold-to-talk, shown only in PTT mode
Gesture isolation prevents mis-touch between rows: the control row
uses tap-only InkWell/IconButton while the PTT row uses a raw
Listener for pointer-down/up events.
Key changes:
- Add CompactVoiceBar widget with state-colored container (normal,
muted, talk-power-blocked)
- Remove mute/deafen IconButtons from AppBar headerActions
- Restructure voice details sheet into primary section + collapsible
ExpansionTiles (audio processing, PTT capability, debug)
- Optimistic state updates for mute/deafen to eliminate tap delay
- Instant PTT visual feedback (no AnimatedContainer fade)
- Constant geometry across all states (no layout shift on toggle)
* fix(voice): preserve current PTT button format
* feat(voice): move mute/deafen controls into VoiceStatusChip
* fix(voice): ensure consistent chip height across mute states
Remove isSelected/selectedIcon from IconButtons inside VoiceStatusChip.
Material 3 toggle IconButtons (_SelectableIconButton) can vary in height
when the selected state changes due to tap target sizing. Use simple
conditional icons instead and set shrinkWrap tap target size with tight
constraints for stable 40x40 buttons regardless of state.
* fix(voice): remove leftover duplicate mute/deafen buttons in VoiceStatusChip
* fix(voice): replace unsafe stereo cast with bytemuck and localise talk-power tooltip
Replace the raw-pointer `&mut [(f32, f32)]` to `&mut [f32]` cast in
the oboe output callback with `bytemuck::cast_slice_mut`, eliminating
the unsafe block and relying on bytemuck compile-time NoUninit
verification instead.
Add voiceTalkPowerBlocked l10n key (en + zh) and replace the only
remaining hard-coded English tooltip in VoiceStatusChip with it.
* feat(voice): add real-time mic input level metering at 30 Hz
Expose input RMS from the audio engine through the bridge as a
dedicated Rust→Dart Stream<double>, replacing the binary on/off
indicator with a proportional dBFS level meter.
Rust side:
- chanora_audio: add set_input_dbfs/input_dbfs accessors to
SharedAudioProcessingStats; restructure CaptureState::ingest()
to compute dBFS from mono buffer before the PTT guard so the
meter shows mic activity even when not transmitting.
- chanora_core: widen audio_stats() return to include f32 input
level.
- chanora_bridge: add input_level: f32 to BridgeAudioStats and
new input_level_stream(sink: StreamSink<f32>) that pushes at
~30 Hz via tokio interval task.
- Update frb_generated.rs serialization for the new field.
Flutter side:
- VoiceLevelMeter: accept optional double level (dBFS), map
-60..0 dBFS to 0..1 fill fraction, animate with
TweenAnimationBuilder for smooth transitions.
- voice_compact.dart: subscribe to inputLevelStream in the voice
details sheet for 30 Hz meter updates, keeping 250 ms poll for
TX/RX counters.
- voice_bar.dart: accept optional inputLevel from the stream.
- main.dart: subscribe to inputLevelStream, pass to VoiceBar.
* chore: sync Flutter build config and dependency updates
- Add Flutter migrator flags to gradle.properties (builtInKotlin, newDsl)
- Add FlutterGeneratedPluginSwiftPackage to iOS/macOS Xcode projects
- Update meta 1.17→1.18, test_api 0.7.10→0.7.11
- Rebuild chanora_bridge framework for macOS
- Update Podfile.lock for iOS and macOS
* fix(voice): correct meter animation, pre-gain dBFS, stream lifecycle, and protocol warnings
B1: Convert VoiceLevelMeter to StatefulWidget tracking previous fill
as Tween begin so the meter animates smoothly instead of resetting
to zero on every frame.
B2: Compute dBFS from pre-gain mono samples in CaptureState::ingest()
so the level meter reflects raw mic input, matching mobile paths.
B4: End input_level_stream after 10 consecutive session errors instead
of emitting -120 dBFS forever when the session is gone.
Also fixes all 13 clippy warnings in chanora_protocol: collapsed
nested if-let patterns, replaced .ok() + Some matching with Ok, used
? operator, and introduced EventChannels struct to reduce the four
helper functions below the 7-argument threshold.
* fix(voice): use MissedTickBehavior::Skip for level meter stream and align dBFS doc
Set MissedTickBehavior::Skip on the input_level_stream tokio interval
so slow audio_stats() calls skip missed ticks instead of bursting,
preventing CPU spikes on the UI meter thread.
Align VoiceLevelMeter class doc: the mapping floors at -60 dBFS
(via dbfsToFraction), not the full -120 range.
* fix(audio): eliminate Android output stutter via Oboe config + lock-free callback
Phase 1 — Oboe configuration:
- Change output stream from Usage::VoiceCommunication to Usage::Game with
ContentType::Sonification to avoid forcing the Legacy (OpenSL ES) data
path on most devices (Oboe issue #2075)
- Switch output format from i16 Mono to f32 Stereo, matching Qint's proven
configuration and eliminating per-callback downmix conversion
- Set buffer size to 2x burst after stream open, reducing default buffer
from 8-20x burst to 2x burst for lower latency
- Remove scratch Mutex<Vec<f32>>; callback writes directly to Oboe buffer
Phase 2 — Lock-free output callback:
- Add audio_event_queue.rs: lock-free SPSC bridge using crossbeam ArrayQueue
with separate packet (lossy) and control (reliable) channels
- OutputCallback now owns AudioHandler directly (no Arc<Mutex<>> on Android)
- Inbound forwarder pushes packets via AudioEventProducer (no mutex)
- set_client_volume pushes control commands via event queue on Android
- iOS/desktop Arc<Mutex<AudioHandler>> path unchanged
* fix(audio): address PR #20 review findings
- Store AudioEventConsumer directly in OutputCallback to eliminate
per-callback Arc clone on the real-time audio thread
- Add SAFETY comment for the unsafe from_raw_parts_mut transmute
- Bound set_client_volume spin-loop to 64 retries with warn log
- Remove redundant crossbeam-utils direct dependency
- Regenerate license inventory for new crossbeam deps (CI fix)
* fix(audio): use ASCII TODO punctuation
* docs(rust): add doc comments to delta enums and fix dead_code warnings
Add missing documentation to ProtocolDelta, CoreDelta, and BridgeDelta
enum variants and their struct fields across the protocol, core, and
bridge crates. Document the ChannelId::ROOT constant and the
take_delta_rx adapter method.
Fix dead_code warnings:
- keyring_disabled: add #[cfg] gate matching its callers
- snapshot_signature: add #[cfg(test)] for future test use
* fix(rust): correct `order` field docs to predecessor channel ID, narrow audio engine cfg gates
- Correct `order` field documentation in ProtocolDelta, SessionEvent,
and BridgeEvent from 'sort order' to 'predecessor channel ID
(TeamSpeak linked-list ordering hint)' per Copilot review feedback.
- Narrow AudioEngine voice_out_tx, voice_activity_selector, and mic_gain
cfg gates from ios+macos+android to android-only, since these fields
are only read from self in android_restart_voice_unit. On iOS/macOS the
values are passed directly to the voice backend at construction time.
* fix(diag): record bridge events in diagnostics page
Connection lost/reconnecting/disconnected and iOS audio interruption
events now appear in the diagnostics dialog alongside existing error
snackbar entries.
* fix(diag): reduce audio callback sample verbosity to debug
The render callback diagnostic sample logged every 100 callbacks
(~2s) at INFO level, flooding the 256-entry release log buffer and
pushing out useful events. Changed to DEBUG so it only appears in
debug builds with the larger 4096-entry buffer.
* fix(diag): add timestamps to Rust diagnostic log entries
Clarify ONNX Runtime guidance with direct-open install hints, restore desktop WebRTC VAD visibility, map mouse side buttons through focused PTT capture/runtime paths, and wait for server acks before showing chat sends as successful.
Constraint: Linux release UX must stay functional when ONNX Runtime is optional and GNOME portal availability varies
Rejected: Keep desktop VAD locked to Silero only | misleads users when ONNX Runtime is skipped
Confidence: medium
Scope-risk: moderate
Directive: Preserve the protocol send-ack wait path for chat so UI success always tracks real server acceptance
Tested: flutter analyze lib/main.dart lib/widgets/chat_views.dart lib/widgets/input_dialogs.dart lib/widgets/startup_dependency_screen.dart; flutter test test/widgets/input_dialogs_test.dart test/widgets/chat_views_test.dart test/services/startup_dependency_check_test.dart test/widgets/startup_dependency_screen_test.dart test/widgets/voice_settings_controls_test.dart test/widgets/audio_processing_config_state_test.dart; cargo test -p chanora_protocol --lib; cargo test -p chanora_audio ptt_backends --lib
Not-tested: Live manual GNOME portal rebind/global PTT on a real desktop session; observer-bot chat against a live server after the sender-name fallback change
Implementation of SDD-120 §1-§8:
Bench harness (crates/chanora_audio/benches/):
- common.rs: deterministic synthetic audio (440 Hz sine, no RNG).
- realtime_capture.rs: bench_capture_alloc_count (dhat) +
bench_capture_callback_wall_clock (criterion).
- opus_codec.rs: bench_opus_encode_latency + bench_opus_decode_latency
(direct audiopus, not AudioHandler — SDD-120 §3 item 4).
- resampler.rs: bench_resampler_throughput across 44.1->48 /
16->48 / 48->48 passthrough.
CI tooling (crates/chanora_audio/examples/):
- emit_baseline.rs: aggregates criterion estimates.json outputs
into the SRS-217 baseline schema.
- compare_baseline.rs: applies SRS-219 tolerance, renders markdown
table with 🟢/🟡/🔴 markers + yellow simpler-form realization per
SDD-120 §8.
Deviation from SDD-120 §2 / §5 / §7 placement: these tools live
under examples/, not benches/ or src/bin/. Rationale: they must
consume serde_json (a dev-only dep — production builds must not
pull it). Cargo only resolves dev-dependencies for [[test]],
[[bench]], and [[example]] targets; [[bin]] targets under
src/bin/ see only regular [dependencies]. examples/ keeps the
binaries out of the production dep tree while still giving them
cargo run --example invocation. An SDD-120 amendment should
reflect this.
Workflows (.github/workflows/):
- bench-advisory.yml: PR + push triggers; runs benches; posts a
sticky PR comment via actions/github-script@v7; job status is
always success (SRS-218 clause 4 — non-blocking).
- bench-baseline-update.yml: workflow_dispatch only; runs benches;
opens PR via peter-evans/create-pull-request@v6 (sole writer of
the SAD-089 baseline JSON).
Cargo.toml additions ([dev-dependencies] only — verified excluded
from --release builds): criterion 0.5, dhat 0.3, serde_json 1.
Source-code seam: minimal pub-but-#[doc(hidden)] bench_seam module
in chanora_audio (engine.rs + lib.rs re-export) so the criterion
bench harness can construct a CaptureState and drive
CaptureState::ingest without re-implementing the engine (SDD-120
§3). Non-iOS targets only — CaptureState itself is iOS-gated.
Initial baseline seed: crates/chanora_audio/benches/baselines/
x86_64-unknown-linux-gnu.json = {}. compare_baseline handles the
missing-baseline case gracefully and emits a 'no red markers'
report; the first manual dispatch of bench-baseline-update.yml
after merge establishes the real values.
Out of scope per SDD-120 §10: production telemetry export,
build-failing hard CI gate, multi-host benchmarking, IDE
integration, Dart-side bridge round-trip bench.
Verification:
- cargo check --workspace --all-targets: PASS.
- cargo bench --bench realtime_capture --no-run: PASS.
- cargo bench --bench opus_codec --no-run: PASS.
- cargo bench --bench resampler --no-run: PASS.
- cargo build --example emit_baseline --example compare_baseline
-p chanora_audio: PASS.
- cargo test --workspace: 106 passed, 0 failed, 3 ignored — no
regression from prior count.
The capture cpal callback (CaptureState::ingest) ran two heap
allocations per callback on the realtime audio thread:
1. engine.rs:1196-1202 — fresh `mono: Vec<f32>` for the downmix
output, once per cpal callback (50–100 Hz).
2. engine.rs:1217-1218 — `pcm_accum.drain(..FRAME_SAMPLES).collect()`
building a fresh Vec<f32> of 960 samples per Opus frame.
Both sites mirror the pattern already fixed for the output side at
engine.rs:1389-1397, where allocating per callback on glibc malloc
was correlated with user-perceptible audio popping. The output-side
fix replaced the per-callback allocation with a pre-allocated
`scratch` Vec that is cleared and resized in place; this commit
applies the same template to the capture side.
Changes:
- Add `mono_scratch: Vec<f32>` and `frame_scratch: Vec<f32>` to
CaptureState. Initialised with Vec::with_capacity(4096) and
Vec::with_capacity(FRAME_SAMPLES=960) respectively in
CaptureState::new.
- Replace the downmix Vec construction with in-place push into
`self.mono_scratch`; `clear()` retains capacity across callbacks.
- Replace the drain().collect() with `self.frame_scratch.extend(
self.pcm_accum.drain(..FRAME_SAMPLES))`; same capacity-retention.
- The resampler call uses std::mem::take to swap the scratch buffer
out for the duration of the &mut self call, then moves it back —
the backing allocation is preserved across callbacks.
Algorithm semantics are unchanged: same downmix arithmetic, same
clamp loop, same Opus encode call sequence. Only the storage
strategy differs.
Out of scope (intentionally not touched):
- Android audio path (android_voice_unit.rs, mobile_voice_backend.rs):
researcher constraint C-4 — the Android cpal data path is mid-
migration and being replaced.
- Output callback at engine.rs:1409+: the only obvious per-callback
allocation there (`scratch`) was already fixed; a fuller audit
is a separate scope decision.
- The `scratch` buffer at engine.rs:1389-1397 — already correct.
Verification:
- cargo check --workspace --all-targets: passes.
- cargo test --workspace: 106 passed / 0 failed / 3 ignored.
- cargo clippy --workspace --all-targets: no new lints introduced;
the one warning inside the edited region (clamp-like pattern at
line 1266) was pre-existing on the copied clamp loop.
Per SDD-106 §6 add a permission-state clamp to TransmitModeSelector.
When RECORD_AUDIO is Denied or PermanentlyDenied the transmit gate
is forced false regardless of PTT or voice-activity state; on
Granted the clamp releases and normal transmit decisions resume.
The clamp takes precedence over PTT and hard_mute in the decision
ordering documented inline.
Three new tests cover the clamp behavior, the release-on-grant
transition, and the non-RECORD_AUDIO ignore path.
Trace: SDD-106 §6, SRS-209.
Replace the prior one-shot android_engage_voice_communication call
with a ModeStack-mediated acquire/release pair. AudioEngine snapshots
the system audio mode on first acquire via android_get_audio_mode()
and restores it on last release via android_set_audio_mode(prior).
MODE_IN_COMMUNICATION (3) is engaged across the voice-session lifetime
per SDD-108.
Includes the Android AudioManager getMode/setMode JNI helpers
(placed in chanora_audio::engine alongside the existing JNI surface)
and the small ptt.rs touch needed for the SDD-108 ID-tag on the
existing tests.
Trace: SDD-108, SDD-115.
Introduce ModeStack, a pure-Rust refcount-composable wrapper for
Android audio-mode acquire/release with prior-mode snapshot. Per
SDD-108 §1/§2 the engine snapshots the system audio mode on first
acquire and restores it on last release; composed acquires are
no-ops while the mode is held.
ModeStack is panic-free; release-on-zero returns AlreadyReleased
rather than panicking. Six SWE4-UV-045-tagged unit tests cover the
acquire/release semantics on the host target.
Trace: SDD-108, SWE4-UV-045.
The ring-buffer architecture (rc.8+73..+74) was making playback
strictly worse. Diagnostic data at +74 conclusively showed:
* Producer task ran perfectly at 50 Hz (250 ticks per 5 s).
* AudioHandler returned silence on 65-84% of fill_buffer calls
even when window_peak_f32 reached 0.98 (full-scale audio).
* Ring buffer never accumulated beyond 30 ms because consumer
(VPIO render callback at 43.5 Hz, ~1440 samples per call)
drained samples faster than the 50 Hz producer could push
them, in net effect.
The producer drained AudioHandler at 50 Hz \u2014 slightly faster
than iOS VPIO actually consumes audio. Each fill_buffer call
asked for 20 ms but adjacent Opus packets hadn't arrived yet, so
fill_buffer returned mostly silence. Linux/SDL's same pattern
works because SDL calls fill_buffer at EXACTLY the device
callback rate (50 Hz = 20 ms per buffer); the rates match.
Fix: revert to direct fill_buffer call from the render callback
(the SDL pattern in tsclientlib's own reference example at
tsclientlib/examples/audio_utils/ts_to_audio.rs). The render
callback now:
1. Resizes scratch_stereo Vec to 2 * num_frames f32 if needed
2. Zeros the live slice (fill_buffer is additive, not clearing)
3. Locks AudioHandler, calls fill_buffer(scratch_stereo)
4. Downmixes L+R -> mono i16 with master gain into out[]
5. Applies output_muted bypass
6. Tracks peak_out + audio/silence ratios for diagnostic
The closure owns scratch_stereo across callbacks for stable
allocation. Same memory model as Linux/SDL.
Removed:
* tokio::spawn producer task
* rtrb dep + RingBuffer<i16> + Producer/Consumer split
* tokio::sync::oneshot shutdown channel
* producer_shutdown_tx field on IosVoiceUnit struct
* RING_BUFFER_SAMPLES / PRODUCER_TICK_MS constants
* Producer-side diagnostic counters
Diagnostic kept: cb / num_frames / frames_changes /
callbacks_with_audio / callbacks_with_silence / peak_out_i16 /
gain. Logged every 100 callbacks.
The choppy / clicks symptom is independent of the buffer
architecture \u2014 it's whatever AudioHandler is doing on iOS
that's different from Linux. Next investigation step is to
either (a) switch from VPIO to RemoteIO unit (lose Apple's
voice processing entirely), or (b) understand why AudioHandler
returns silence so often on iOS-arrival packet timing patterns.
Build counter 74 -> 75.
External reviewer correctly identified that the +73 ring-buffer
commit didn't fix the symptom but the architecture is still
right. We need to distinguish two possible causes:
(a) Producer task isn't running (or running too rarely) so
ring stays underfilled.
(b) Producer IS running but fill_buffer returns zeros most of
the time (AudioHandler stuck in buffering_samples state
or no packets reaching it).
The +73 render-side diagnostic was insufficient: we logged
underruns + peak_out_i16 but not what the producer was
actually pushing. This commit adds producer-side metrics
rolled up every 5 s (250 ticks at 20 ms):
Producer task:
producer_ticks : timer firings (= ~250 per 5 s window;
fewer = tokio scheduler stalled)
produced_chunks : pushes into ring (= ticks - drops)
fill_buffer_calls : AudioHandler queries
fill_buffer_zero_returns : ticks where scratch came back all
zeros (no decoded content to play)
ring_full_drops : ticks where ring was full and we
skipped the push
ring_min/max_samples : depth envelope across window
ring_min/max_ms : same in milliseconds
window_peak_f32 : max scratch sample across window
window_rms_f32 : RMS of all scratch samples across
window
Render callback (per-100-callback as before, plus new fields):
ring_avail_before : Consumer::slots() before this read
(= how many samples were sitting in
the ring at callback entry)
read_frames : samples successfully popped
zero_filled : samples zero-filled because ring
was empty (= num_frames - read_frames)
underruns / underrun_samples / peak_out_i16 / clip_count_i16
: as before
Reading the next iteration's log:
If producer_ticks << 250 per 5 s window:
tokio scheduler isn't running the task fast enough.
Move producer to its own dedicated runtime, or use
std::thread + std::sync::mpsc + std::thread::sleep
instead of tokio.
If producer_ticks ~= 250 AND fill_buffer_zero_returns is
high (most ticks return silence):
AudioHandler isn't decoding packets fast enough OR is
stuck buffering. Bug is upstream in protocol layer
packet delivery or AudioHandler's jitter state machine.
The ring buffer architecture cannot fix this.
If producer_ticks ~= 250 AND fill_buffer_zero_returns is
low AND ring_min_ms stays >100ms AND underruns are low BUT
consumer's peak_out_i16 is still 0:
Something is wrong between push and pop. Lock-free
ring corruption, or wrong stride.
Pure diagnostic. No behavioural change beyond the logging.
Producer scratch envelope scan is O(scratch.len()) = 1920
samples per 20 ms tick = ~96k iterations/sec on the audio
producer thread \u2014 negligible CPU.
Build counter 73 -> 74.
User confirmed at +72 the symptom is 'voice + constant clicks +
choppy fragments'. The diagnostic data conclusively pointed to
iOS VPIO render-callback timing as the cause:
* frames_changes=60+ per 100 callbacks at cb>=1800
iOS keeps switching num_frames between 960 and 1104
on roughly 60% of callbacks
* peak_out_i16 is sensible (2500-16870, never clipping)
when AudioHandler returns content
* input_was_zero=true on most callbacks during active speech
AudioHandler keeps entering buffering_samples state
The cause: previous render callback called fill_buffer
synchronously every iOS audio thread invocation. With iOS
calling at irregular rates with irregular sizes, AudioHandler's
jitter buffer (sized around 20 ms Opus frames) cannot satisfy
arbitrary-sized requests and falls back to returning silence
(&[] empty slice) on misaligned reads. The silent gaps in the
middle of the output buffer create discontinuities = audible
clicks; the missing-tail content produces choppy fragments.
Fix (architectural): decouple the AudioHandler decoder from the
VPIO render callback via a lock-free SPSC ring buffer.
Producer (tokio task, 50 Hz):
every 20 ms:
fill_buffer(scratch_stereo_f32, 1920 = 20 ms stereo)
downmix L+R -> mono i16 (960 samples)
ring_buffer.push_slice(mono_i16)
Consumer (VPIO render callback, iOS audio thread):
every callback:
pop num_frames samples from ring buffer into out
zero-fill tail on underrun
Why it works:
* Producer always asks AudioHandler for a stable 20 ms chunk
(perfectly aligned with internal Opus frame size). No more
buffering_samples false-triggers.
* Consumer pulls whatever iOS asks for whenever iOS schedules
it; ring buffer's 200 ms depth absorbs the callback jitter.
* This is the standard pattern every production VoIP audio
engine uses (WebRTC, Discord, FaceTime) to bridge bursty
Opus decoders to bursty platform audio callbacks.
Implementation:
* New dep: rtrb 0.3.4 (RustAudio realtime-safe SPSC ring
buffer, 6.8M downloads, lock-free push/pop with no
allocation on the audio thread).
* RING_BUFFER_SAMPLES = 9600 (200 ms mono i16 at 48 kHz).
Sized for 10x producer ticks of headroom.
* PRODUCER_TICK_MS = 20 (matches Opus 50 Hz packet rate).
set_missed_tick_behavior(Skip) to avoid burst catch-up on
runtime stalls.
* Producer task spawned in IosVoiceUnit::start, shutdown
via tokio::oneshot when IosVoiceUnit drops.
* Render callback is now just: pop into out, zero-fill tail,
apply mute then gain.
* Gain applied CONSUMER-side so user volume changes take
effect within one callback (<= 200 ms latency).
* Underrun diagnostics: count underrun callbacks + total
zero-filled samples, log every 100 callbacks.
Threading + safety:
* rtrb is lock-free SPSC. Audio thread never blocks.
* Producer can block briefly on Arc<Mutex<AudioHandler>>
contention with the inbound forwarder (handle_packet), but
not with the audio thread.
* Producer task is owned by tokio runtime; explicit shutdown
channel ensures it exits when the engine stops.
Build verify:
* Linux host: cargo check clean in 4.06s (downloads rtrb 0.3.4).
* iOS Mac: cargo check clean in 2.14s.
Build counter 72 -> 73.
External code review pushed back on the 'iPhone speaker hardware
distortion' hypothesis and pointed out we need more than just
peak measurements. The reviewer's checklist:
* peak_i16
* rms_i16
* num_clipped_samples (abs >= 32767)
* zero_fill_count / underrun_count
* callback_frame_count variability
* decoded_packet_duration_ms
* input_was_zero
* actual ASBD / actual sample rate
The format diagnostics at +71 already showed iOS honoured
48 kHz Int16 mono on both buses and that .default mode +
.defaultToSpeaker routed to the speaker correctly with
outputVolume=0.45. So format + route are confirmed correct.
The remaining mystery is WHY 'loud but distorted' \u2014 we need
sample-level metrics to isolate where in the pipeline the
breakage occurs.
This commit instruments the VPIO render callback with:
* num_frames + frames_changes : detects iOS re-negotiating
buffer size between callbacks
(which would imply jitter the
fixed scratch_stereo Vec can't
absorb cleanly).
* peak_stereo + rms_stereo : characterises AudioHandler's
output BEFORE our downmix.
Distinguishes 'real audio
arriving' from 'silence'.
* peak_out_i16 + clip_count : measures what we hand VPIO.
clip_count > 0 means we're
clipping at our boundary even
with gain=1.0 \u2014 indicates
upstream is over-driven.
* input_was_zero : explicit silence/no-talker
indicator separate from peak=0
which could mean tiny content
rounded to 0.
Reviewer's preferred diagnostic path is to dump PCM to file
and play with ffplay externally; that's iOS-impractical
without a shared filesystem path the user can extract via
Files.app. Instead we sample the same metrics in-callback at
~2 Hz which gives us the same information at run time.
Pure diagnostic. No behavioural change. Counters live in the
FnMut closure so the audio thread cost is one branch +
counter increment per callback, plus a one-pass RMS sum +
peak scan every 100 callbacks.
Build counter 71 -> 72.
Reviewer also recommended a headphone test in parallel \u2014
that will be done by the user (out-of-band) at the next
test cycle to determine whether the symptom changes when
audio leaves the speaker path.
Per external review (helpful checklist from ChatGPT-style analysis
pointing out we never verified that iOS actually accepted our
preferred sample rate / channels / format): preferredSampleRate
and preferredIOBufferDuration are HINTS, not guarantees. iOS may
substitute its own values if the hardware can't satisfy our
preference. If VPIO is running at 44.1 kHz Float32 stereo while
our render callback writes 48 kHz Int16 mono into the buffer,
the symptoms would match what user reports (broken playback,
pitch shifted, severe distortion) and our previous diagnostics
wouldn't catch it because they only sampled signal-level metrics.
This commit adds two diagnostic emissions to verify:
1. AppDelegate.swift::activateAudioSession: after setActive
succeeds, log the ACTUAL session state \u2014 category, mode,
sampleRate, ioBufferDuration, current route (inputs +
outputs), outputVolume. Lets us see whether iOS honoured our
.default + .defaultToSpeaker setup and which physical route
it picked at launch.
2. ios_voice_unit.rs::IosVoiceUnit::start: after unit.start()
succeeds, log the actual OUTPUT and INPUT stream formats
VPIO accepted (sample_rate, channels, sample_format, flags).
If these differ from our requested 48 kHz Int16 mono, we
have a format-substitution problem.
Three possible outcomes from the next test:
* Both diagnostics confirm 48 kHz Int16 mono on both buses and
the session sampleRate=48000 -> format is correct; the
playback breakage is somewhere else (e.g. AudioHandler
jitter buffer behaviour, route binding, or hardware mixer).
* Session sampleRate != 48000 -> we need to insert a sample
rate converter or pin AVAudioSession's
setPreferredSampleRate(48000) explicitly in Swift before
setActive.
* VPIO substituted Float32 for our Int16 request -> our render
callback is writing i16 magnitudes into a Float32 buffer
which would explain the distortion. Fix: write Float32
directly using data::Interleaved<f32> instead of i16.
Build counter 70 -> 71. Pure diagnostic; no behavioural
change.
User report after the 8x boost commit (e85a6d3): playback STILL
broken, but now the diagnostic clearly shows the actual problem.
Render-callback peak_out_i16 SATURATES at 32767 on speech peaks
(cb=600, 1100, 1200, 2400) because the 8x boost amplifies an
already-loud signal into hard clipping. Quiet content reaches
audible level but loud peaks are catastrophically distorted.
The 8x boost was treating the wrong cause.
Real root cause (researched online after user prompted: 'this is
iOS a popular platform, there must be solutions'): iOS has TWO
independent audio channels:
In-call channel (.voiceChat / .videoChat modes)
* Routes through the phone-call audio path.
* Aggressively ducks non-voice content to the earpiece.
* Volume controlled by a separate in-call hardware
register, not the side buttons when not actively on a
phone call.
Media channel (.default mode)
* Routes through the standard media playback path.
* No automatic ducking.
* Volume controlled by the side volume buttons normally.
With AVAudioSession mode .voiceChat, iOS sends our output
through the in-call channel which plays at 'earpiece-level'
loudness on the speaker too. Signal is technically present but
buried under the speaker's noise floor. With mode .default +
.defaultToSpeaker option, output routes via media channel and
plays at normal loudness.
Both Twilio (video-quickstart-ios) and Daily.co (patched WebRTC
module) document the same workaround and use VPIO for AEC while
keeping the session mode at .default for loud playback:
github.com/twilio/video-quickstart-ios/issues/522
stackoverflow.com/questions/79834998 (Daily.co)
The user also noticed 'tx/rx almost no changes even receiving
packages' \u2014 likely a misinterpretation of the frames counter
not advancing as fast as expected during quiet voice; AudioHandler
returns silence when its jitter buffer is in buffering_samples
state which doesn't fire 'decode failed' but also doesn't
increment frames_received. The real issue is still the playback
ducking; the counter behaviour is a downstream symptom.
Changes:
1. AppDelegate.swift: AVAudioSession mode .voiceChat -> .default
with options [.defaultToSpeaker, .allowBluetoothHFP,
.allowBluetoothA2DP]. VPIO continues to do its job (AEC, NS,
AGC on the mic side); only the playback routing changes.
The earlier 'speaker selector silent under .default' bug
does NOT apply because we no longer use cpal RemoteIO \u2014
VPIO honours overrideOutputAudioPort under any mode.
2. ios_voice_unit.rs: revert the 8x output boost from e85a6d3.
With media-channel routing, signal levels are correct and
no software amplification is needed. Render callback restored
to plain (l+r)*0.5*gain downmix.
3. ios_voice_unit.rs: revert the BypassVoiceProcessing toggle
from c16318c. The VPIO chain stays enabled so we keep
capture-side AEC/AGC/NS for free \u2014 the playback breakage
it was trying to fix was the wrong layer all along.
4. ios_voice_unit.rs: drop the diagnostic render-callback log
line. Production-clean code; can be re-enabled by reverting
the diff in the closure if future debugging needs it.
Build counter 69 -> 70.
User-pasted log at +66 (https://pb.hit.moe/q8heratf.txt) shows
conclusive data over a 110-second continuous talker session:
Average peak_stereo_f32: ~0.005-0.010
Loud peak (one moment): ~0.234
peak_out_i16: ~150-300 (out of 32767)
The signal arriving at our render callback from
AudioHandler::fill_buffer is consistently at -40 dB FS for
normal human speech. The Opus decode path in tsclientlib is
correct (Channels::Stereo decoder, no attenuation in fill_buffer,
queue.volume defaults to 1.0). The remote (official TS3 client)
is simply transmitting voice at the level desktop TS3 clients
typically do \u2014 well below speaker-ready amplitude.
On Linux/macOS/Windows our cpal+SDL output paths play that
signal through OS audio mixers that apply additional system-
volume amplification, reaching the user's ears at sensible
loudness. iOS's VPIO output is NOT amplified by the system
mixer \u2014 it goes nearly raw to the speaker, so the same -40
dB signal is barely audible. Musicbot (which encodes near full
scale at ~-6 dB) plays fine; human voice does not.
Fix: apply a fixed 8x (+18 dB) iOS output boost on top of the
existing user-controllable output_gain. A -40 dB signal becomes
-22 dB (normal speakerphone level). User's volume slider
continues to function in a useful 0-2x range on top.
effective_gain = user_gain * IOS_OUTPUT_BOOST
Hard-clip at \u00b11.0 in the mono downmix prevents loud signals
(musicbot at peak 0.5 -> 4.0 -> clamped to 1.0) from
overflowing i16 wrap-around. Musicbot may distort on extreme
sustained content but voice remains intelligible at all
levels. Distortion ceiling matches the cpal-side FromF32 for
i16 conversion in engine.rs.
This is the same pattern Discord / Zoom / FaceTime iOS clients
apply: an internal output normalization on top of the user-
facing volume slider, calibrated so received voice is audible
at default settings.
Build counter 68 -> 69.
User report at +67 (.voiceChat mode): playback still 'broken'.
Even with VPIO's Apple-documented session-mode pairing,
its output-side gating chain (echo subtraction + adaptive
noise suppression) chops quiet inter-phoneme content of human
voice. Musicbot signal (loud, ~continuous) survives because it
stays above the gating threshold; speech does not.
Fix: set kAUVoiceIOProperty_BypassVoiceProcessing = 1 on the
unit immediately after EnableIO (before stream format / callbacks
/ initialize). This disables ALL VPIO voice processing \u2014 the
unit becomes effectively a vanilla RemoteIO with mic + speaker
buses. Raw samples pass through both directions.
Trade-off:
* Lost: Apple's hardware AEC + AGC + NS on the mic path. User
reports current capture is clean already, suggesting their
test environment (headset? non-speakerphone?) doesn't need
AEC. If echo loops back when speakerphone is engaged, we'll
re-evaluate \u2014 either re-enable VPIO selectively for
echo-prone routes or ship software AEC (DEC-007).
* Gained: playback is no longer gated. Quiet inter-phoneme
speech content reaches the speaker.
Property setter:
* Constant: kAUVoiceIOProperty_BypassVoiceProcessing = 2100
* Scope: Global, Element: Input (1) per WebRTC's reference iOS
ADM (voice_processing_audio_unit.mm).
* Value: u32 = 1 (= bypass).
* Soft-fail with warn log if the property is rejected on an
exotic iOS version (the unit still works, just with VPIO
defaults).
Build counter 67 -> 68.
User reports capture-side audio (mic -> remote) is clean but
local playback (remote -> speaker via VPIO render callback) is
'broken and poor' at +65. The pipeline appears correct on paper:
fill_buffer -> downmix (L+R)*0.5 -> gain -> clamp -> i16 -> VPIO.
No errors logged. To stop guessing, add structured logging
inside the render callback so the next test cycle yields data
about what's actually flowing through.
Diagnostic emitted every 100th callback (~2 s at iOS's typical
20-50 Hz callback rate):
ios VPIO render callback diagnostic sample
cb=<counter>
num_frames=<N> VPIO buffer size in mono samples.
Expected ~960 (20ms) or ~1104 (23ms).
Outliers point at format mismatch.
peak_stereo_f32=<f32> Peak |sample| of AudioHandler's
output BEFORE gain + downmix.
0.0 = handler is producing silence
(jitter underrun, no audio).
~1.0 = full-scale content reaching
the callback as expected.
peak_out_i16=<i16> Peak |sample| of the downmixed mono
i16 we write to VPIO. Zero with
non-zero peak_stereo = downmix bug.
Near 32767 = clipping pressure.
gain=<f32> Current master output gain.
What we'll be able to diagnose from a 5-second talker session:
* peak_stereo_f32 = 0 throughout
-> AudioHandler isn't producing samples. Inbound forwarder
may not be feeding it, or jitter buffer is stuck in
buffering_samples state. NOT a render-callback bug.
* peak_stereo_f32 oscillating, peak_out_i16 = 0
-> Downmix or i16 cast is broken. Math bug in the loop.
* num_frames wildly different from ~960-1104
-> StreamFormat got rejected and VPIO is delivering a
different rate. Format-pinning fight with the session.
* peak_stereo_f32 normal AND peak_out_i16 normal AND user
still says 'broken'
-> The signal reaches the device cleanly but iOS's VPIO
output processing (AEC residual subtraction, AGC
compression, NS gate) is mangling it after our callback
returns. That's a VPIO-config problem, not a render-
callback problem; fix is to disable specific VPIO
voice-processing properties on the unit before
initialize().
Pure diagnostic commit. No behavioural change beyond a
warn-rate-limited info log line every ~2 seconds. Cost in the
audio thread is one branch + counter increment + (every 100th)
a tracing macro invocation.
Build counter 65 -> 66.
Replace the silence-emitting render callback from commit 1 with
real playback that drives AudioHandler::fill_buffer and downmixes
its 48 kHz stereo f32 output to the i16 mono buffer VPIO expects.
Pipeline per render callback (mirrors the cpal-output + sdl_output
contracts so the platform-neutral playback path is preserved):
1. Lock the shared Arc<Mutex<AudioHandler>>, ask fill_buffer to
populate a stereo-f32 scratch slice of length 2*num_frames.
AudioHandler runs Opus decode + per-client jitter buffer + mix
internally. Same primitive every other platform calls.
2. If output_muted is true, zero the i16 output buffer and return.
We still ran fill_buffer in step 1 so the jitter buffer drains
while muted — preventing unbounded growth — which matches the
cpal/SDL backend contract.
3. Downmix stereo -> mono with master gain:
mono_f32 = (l + r) * 0.5 * gain
i16_out = (mono_f32.clamp(-1.0, 1.0) * i16::MAX) as i16
The 0.5 average preserves total signal energy with 3 dB
headroom against sum-of-correlated-peaks clipping. Multiply by
gain after the downmix saves one mul per sample. Hard-clip on
the i16 cast is acceptable because the upstream stereo signal
is already in [-1.0, 1.0] from the f32 mix; only gain >1.0
creates clipping pressure and that path is identical to every
other backend's i16 conversion.
Closure ownership:
* scratch_stereo: Vec<f32> moved into the FnMut closure. First
callback grows it to 2*num_frames; subsequent callbacks reuse
the backing allocation. The audio thread never hits the
allocator on steady-state callbacks.
* handler_for_render / output_gain_for_render / output_muted_for_render
are Arc clones taken before the closure literal.
Public API change: AudioEngine -> IosVoiceUnit::start parameters
that were previously underscored (commit 1 placeholder) are now
all consumed by the wiring. Signature is unchanged, just the
binder names lose the leading underscore. engine.rs call-site
is unaffected.
Build verify on Mac (target aarch64-apple-ios): cargo check
clean in 0.33s, no errors, no warnings.
Build counter 63 -> 64 — About dialog shows v1.0.0-rc.8+64.
Replace the no-op input callback from commit 1 with a real
capture pipeline that mirrors the cpal-side CaptureState in
engine.rs but is type-specialised for the i16 mono samples VPIO
delivers natively.
New IosCaptureState struct (private to ios_voice_unit.rs) owns:
* OpusEncoder configured for VoIP at 48 kHz mono (32 kbps,
complexity 10, inband FEC, packet-loss-perc 5 — identical
tuning to try_open_capture in engine.rs).
* pcm_accum: Vec<i16> with capacity 2*FRAME_SAMPLES_MONO, growing
if a VPIO callback ever delivers more than ~40 ms.
* opus_out: [u8; MAX_OPUS_FRAME] scratch.
* Cloned Arc<AtomicBool> transmit gate + Arc<AtomicU32> frames-sent
counter shared with AudioEngine.
ingest_i16 flow:
1. If PTT gate is off -> clear accumulator + return (matches cpal
behaviour, no pop on PTT-release edge).
2. Apply mic_gain. Fast-path when gain==1.0 skips the multiply +
saturate loop entirely; otherwise saturating mul-then-cast
keeps the signal in the i16 envelope.
3. Drain complete 20 ms / 960-sample frames from the accumulator,
encode via encoder.encode (i16 path, no float conversion
needed since VPIO already gave us i16), build OutPacket with
AudioData::C2S { codec: OpusVoice }, try_send on voice_out_tx.
4. Frame buffer is stack-allocated [i16; FRAME_SAMPLES_MONO] —
no per-callback heap allocation on the realtime audio thread.
VPIO setup changes in IosVoiceUnit::start:
* NEW: explicit kAudioOutputUnitProperty_EnableIO (=2003) with
value 1 on (Scope::Input, Element::Input) BEFORE the stream
format setters. VPIO's input element is OFF by default; without
this toggle no audio flows in and the input callback never
fires. Commit 1's comment claiming set_input_callback handles
this was wrong; coreaudio-rs's set_input_callback only installs
the kAudioOutputUnitProperty_SetInputCallback property, not
the EnableIO toggle.
* Apple's documented sequence (now matched):
1. AudioComponentInstanceNew -> AudioUnit::new_uninitialized
2. EnableIO on element 1 -> set_property(2003, ...)
3. Stream format both elems -> set_stream_format x2
4. Install callbacks -> set_input_callback + set_render_callback
5. AudioUnitInitialize -> unit.initialize
6. AudioOutputUnitStart -> unit.start
* set_input_callback closure now moves the IosCaptureState in
by value and calls ingest_i16 with args.data.buffer (the
&mut [i16] coreaudio-rs delivers after running AudioUnitRender
internally to pull the mic samples into a pre-allocated
AudioBufferList).
What this commit does NOT do:
* Output render callback is still a silence-emitting stub.
Commit 4 lands the AudioHandler::fill_buffer + i16 downmix.
* Route-change handling — commit 5.
Build verify on Mac (target aarch64-apple-ios): cargo check
clean in 1.18s, no errors, no warnings.
Build counter 62 -> 63 — About dialog shows v1.0.0-rc.8+63.
Two follow-ups after the iOS Rust build went green at 5de6ecc:
1. cpal-side framing constants (SAMPLE_RATE / FRAME_SAMPLES /
MAX_OPUS_FRAME) are dead code in the current iOS commit
because the VPIO callbacks are still no-op stubs and don't
reach the constants yet (commits 3 + 4 will). They are
genuinely live on every other platform via the cpal capture
pipeline. Mark each with #[allow(dead_code)] and add a
comment pointing at the commits that will reactivate them on
iOS, instead of cfg-gating per-platform (the constants are
framing invariants of the engine itself, not per-backend
details).
2. ios/Podfile.lock regenerated on the Mac via 'pod install'
to register package_info_plus (0.4.5) which landed in
97a6ba6. Without this regen the Xcode build fails with
'The sandbox is not in sync with the Podfile.lock' because
Xcode's CocoaPods integration check sees a new plugin in
pubspec.yaml that has no matching Pod entry. Five pods now
in the lockfile: Flutter, audio_session, chanora_bridge,
connectivity_plus, package_info_plus.
Build counter 61 -> 62 — the About dialog will display
v1.0.0-rc.8+62 so the user can confirm the build under test
matches this commit (the previous build said +61).
iOS build of chanora_audio (target aarch64-apple-ios) failed with
four compilation errors after commit 2 landed. Root causes were
all simple symbol-path / cfg-gating mistakes from the skeleton
commit; the underlying design is unchanged.
1. ios_voice_unit.rs: wrong import path for OutPacket. The
chanora_protocol crate re-exports it at the crate root
(`pub use ...::OutPacket` in lib.rs line 52), not from a
`voice` submodule (which doesn't exist).
- use chanora_protocol::voice::OutPacket;
+ use chanora_protocol::OutPacket;
2. ios_voice_unit.rs: LinearPcmFlags lives in
`coreaudio::audio_unit::audio_format`, not in
`stream_format` (the doc page lists it under StreamFormat but
the actual module path is the upstream Apple naming).
- use coreaudio::audio_unit::stream_format::LinearPcmFlags;
+ use coreaudio::audio_unit::audio_format::LinearPcmFlags;
3. ios_voice_unit.rs: `Ordering` import unused (commit 1
skeleton callbacks don't load atomics yet — that comes in
commits 3 + 4). Remove from the std::sync::atomic import to
silence the unused_imports warning.
4. engine.rs::AudioEngine::stop(): the existing body unconditionally
touched self._input_stream and self._output_stream, but commit
2 cfg-gated those fields away on iOS (and added an iOS-only
_ios_voice_unit field in their place). Split the field drop
logic with the same target_os = "ios" cfg so each platform
only touches the fields it actually has.
Also clean up two pre-existing warnings exposed by the iOS cfg
gating:
5. engine.rs: `tracing::{error, warn}` were imported
unconditionally but are only used inside cpal log lines.
Cfg-gate the import to not(target_os = "ios").
6. engine.rs: `AudioData`, `CodecType`, `OutAudio` from
chanora_protocol are only referenced in the Opus encoder feed
inside CaptureState — cpal-side only. Cfg-gate to
not(target_os = "ios"); keep `InboundVoice` + `OutPacket`
on the unconditional path because the inbound forwarder + (in
commit 3) the iOS capture pipeline both reference them.
Also fix a stray duplicate `#[cfg(not(target_os = "ios"))]`
attribute that landed on line 18 in commit 2.
Build verify (Linux host): cargo check -p chanora_audio clean
in 0.53s. iOS-side check pending on Mac.
Build counter bumped 60 -> 61 — the About dialog will display
v1.0.0-rc.8+61 so the user can confirm the build under test
matches this commit.
Split AudioEngine::start_with_gate into two backends:
* start_with_gate_cpal — non-iOS path, the existing cpal + (SDL on
Linux) flow, renamed verbatim, no
behavioural change.
* start_with_gate_ios — iOS path, constructs a single
IosVoiceUnit (VoiceProcessingIO via
coreaudio-rs) for combined mic + speaker.
Spawns the same inbound forwarder task
that pumps Opus packets into AudioHandler.
The public entry point start_with_gate dispatches at the top via
cfg(target_os = "ios") so callers stay backend-agnostic.
Struct field changes:
* _input_stream : cfg-gated to not(ios)
* _output_stream : cfg-gated to not(ios), keeps the
Linux=SdlOutput / else=cpal::Stream split
* _ios_voice_unit: new field, cfg-gated to ios, owns the VPIO
AudioUnit for the engine's lifetime.
Module-level cfg-gating:
* All cpal-only helpers (try_open_capture, build_input_stream,
build_output_stream, CaptureState + impl, ToF32 / FromF32 traits
and impls, PlaybackResampleState) are now wrapped with
#[cfg(not(target_os = "ios"))]. Same for the audiopus
encoder + cpal trait imports — iOS doesn't pull libopus into the
engine yet (commit 3 will, once the VPIO input callback wires
into CaptureState).
Behaviour on iOS for THIS commit:
* AudioEngine starts cleanly, IosVoiceUnit::start succeeds (VPIO
unit allocates + initialises + starts).
* Mic capture is dropped (the input callback is a no-op stub).
* Output emits silence (the render callback fills the buffer with
zeros).
* Inbound forwarder still runs and pushes Opus packets into
AudioHandler — they accumulate in the jitter buffer but no
fill_buffer drain happens (commit 4 fixes that), so the buffer
will grow up to MAX_BUFFER_TIME (~0.5 s) and then tsclientlib
starts dropping the oldest frames. This is fine for now — the
point of this commit is verifying the AudioUnit constructs +
starts cleanly on the device. Audible silence is the expected
state until commits 3/4 land.
Build verify (Linux host): cargo check -p chanora_audio clean in
0.53s. iOS-side compile happens on the Mac via the Xcode build
the user will trigger next.
Edison Jwa