c4145a8727a2b6d63e4a318dfd7f467a096d7fe7
19
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 EdisonJwa
|
c4145a8727 |
feat(flutter,android): permission state banner + AndroidPermissionsService + voice-join gate
Dart consumer for the Android permission state pipeline. New AndroidPermissionsService listens on the app.chanora/android_permissions MethodChannel and exposes a ValueListenable for the UI. The voice-join flow in main.dart calls ensureRecordAudio() before rust.voiceJoin and clamps to listen-only via setHardMute on denial. A non-modal banner above the VoiceBar surfaces the Grant / Open Settings action depending on whether the state is Denied or PermanentlyDenied. On non-Android hosts the service short-circuits to granted; the banner is never built. Also adds the BackIntentService Dart consumer (back_intent_policy + back_intent_service) which the Kotlin BackIntentBridge invokes via MethodChannel for deterministic route-pop ordering. Trace: SDD-028, SDD-106, SRS-163, SRS-209. |
||
|
Edison Jwa
|
7a59f5b9a1 | feat(ios,p0): iOS P0 platform, audio fixes, channel UX | ||
|
EdisonJwa
|
2f6cdd3ad4 |
Revert "diag(ios,audio): log AVAudioSession state + route changes around picker overrides"
This reverts commit
|
||
|
EdisonJwa
|
da631a2bef |
diag(ios,audio): log AVAudioSession state + route changes around picker overrides
Add structured NSLog instrumentation to AppDelegate.swift and debugPrint chains in voice_compact.dart::_AudioOutputPickerSheetState so we can correlate user picker taps with what iOS actually does to the route. Three diagnostic streams: * 'chanora.session[<tag>]' from Swift — full session snapshot (category, mode, sampleRate, ioBufferDuration, current route inputs+outputs, preferredInput) emitted on every setActive and every AVAudioSession.routeChangeNotification with the reason decoded (override / routeConfigurationChange / newDeviceAvailable / etc). * 'chanora.route[<tag>]' from Dart — current route's inputs+outputs emitted before/after every overrideOutputAudioPort or setPreferredInput call, plus a delayed re-check at +250 ms to detect silent reverts. * Existing 'chanora: ...' debugPrint lines from the picker now include the OK case (override returned, setPreferredInput returned) so we see a positive signal in the log when the API didn't throw. Used to root-cause the 'speaker selector not working' issue: the hypothesis is that cpal's RemoteIO AudioUnit reacts to its own format configuration notifications by triggering routeConfigurationChange that reverts our Dart-side override. The logs will confirm or deny this — if we see 'chanora.session[routeChange.override] out=Speaker' followed by 'chanora.session[routeChange.routeConfigurationChange] out=Receiver' within a few hundred ms, that's the smoking gun. Pure diagnostic commit. No behavioural change. Logs are NSLog + debugPrint so they appear in Xcode console / 'flutter logs' / the device log via Console.app or 'devicectl device log'. |
||
|
EdisonJwa
|
b1d117033e |
fix(ios,audio): don't call setPreferredInput after speaker/receiver override (silent route reversion)
User report: 'speakerphone (built-in mic input)' logs printed
successfully but audio output didn't actually switch to speaker.
No exception thrown by either AVAudioSession call.
Root cause:
Previous _selectSpeaker called:
1. await overrideOutputAudioPort(.speaker)
2. await setPreferredInput(builtInMic)
Apple-documented behavior in .voiceChat mode: when
setPreferredInput is called, iOS recalculates the entire route
based on the natural input/output pairing for the selected port.
Built-in mic's natural output pairing is the receiver/earpiece
(matches the 'I'm talking on a phone' UX of .voiceChat). So step 2
caused iOS to SILENTLY REVERT the speaker override from step 1
and route output back through the earpiece.
Net: await chain returned without exception (both calls 'succeeded'
in API terms), debugPrint logged the success message, but the user
heard the call audio coming out of the earpiece, not the speaker.
Same issue affected _selectReceiver (after the speaker bug fix
was reverted): redundant setPreferredInput(builtInMic) call risked
the same recalc race.
Fix:
* _selectSpeaker: only call overrideOutputAudioPort(.speaker).
No setPreferredInput. The override alone is sufficient \u2014 the
input stays on whatever the system was already using (built-in
mic by default, or BT/wired if connected).
* _selectReceiver: only call overrideOutputAudioPort(.none).
No setPreferredInput. Removing the speaker override naturally
returns to .voiceChat's default route (receiver).
* _selectInput (BT / wired / USB): unchanged. These inputs PAIR
their own output device, so .none + setPreferredInput is the
correct combo (user hears audio through the same device they
speak into).
flutter build ios --release --no-codesign: 21.2 s, Runner.app
30.4 MB.
|
||
|
EdisonJwa
|
9413703372 |
fix(ios,audio): drop .defaultToSpeaker; speakerphone toggle now actually switches
User report: 'speaker change not work' \u2014 selecting Speaker or
iPhone receiver in the audio output picker had no audible effect.
Root cause:
AVAudioSession was configured with category options
[.defaultToSpeaker, .allowBluetoothHFP, .allowBluetoothA2DP] +
mode .voiceChat. The .defaultToSpeaker flag tells iOS 'this app's
baseline output route is the speakerphone, even though .voiceChat
mode would normally route to the receiver.'
When the user picked Speaker:
overrideOutputAudioPort(.speaker) <- already at speaker baseline; no-op
When the user picked iPhone receiver:
overrideOutputAudioPort(.none) <- removes speaker OVERRIDE,
restores baseline = .defaultToSpeaker
= speakerphone. Receiver
row silently mapped to speaker.
So both rows produced the same audible state. The picker UI changed
the selected radio but the route didn't actually move.
Fix:
1. AppDelegate.swift: drop .defaultToSpeaker from options. With
pure .voiceChat mode (no .defaultToSpeaker), the baseline is
the receiver/earpiece. overrideOutputAudioPort then works as
documented:
Default = receiver
overrideOutputAudioPort(.speaker) -> speakerphone
overrideOutputAudioPort(.none) -> back to receiver
BT/AirPods connected -> automatic
Wired headphones plugged in -> automatic
2. voice_compact.dart: replace 'catch (_) {/* ignore */}' silent
swallow with debugPrint logging of (a) the actual exception
and (b) which route was selected. So if iOS rejects an
override (e.g. wired headphones plugged in), we can see WHY
in the device log instead of a silent picker no-op.
3. _selectSpeaker also now sets preferredInput to the built-in
mic so input + output stay consistent. Previously the
speakerphone override could leave the mic still routed to a
previously-selected BT input \u2014 user hears self through
speaker but server hears nothing.
flutter build ios --release --no-codesign: 21.9 s, Runner.app
30.4 MB.
|
||
|
EdisonJwa
|
f0016155aa |
feat(ui,ios): replace audio_router with audio_session + custom VoIP-style picker
User reported: the 'output device' picker only listed AirPlay
destinations (other iPhones / AirPlay speakers / AppleTV) and not
the speaker / iPhone receiver / AirPods / wired headset choices.
Root cause: audio_router 1.1.1's iOS path uses AVRoutePickerView,
which is Apple's **AirPlay** picker UI \u2014 by design it only lists
AirPlay-eligible output destinations, NOT the input/output route
choices we need (speaker vs receiver vs Bluetooth HFP vs wired).
AVRoutePickerView is the right UI for 'cast audio elsewhere'; for
'pick how I hear / talk' (VoIP) the right primitive is direct
AVAudioSession calls.
Fix: replace audio_router with audio_session 0.2.3 (Ryan Heise,
verified publisher, 865k downloads, MIT). audio_session exposes:
* AVAudioSession.availableInputs \u2014 enumerate every real input
port: builtInMic, bluetoothHfp, bluetoothA2dp, headsetMic
(wired), usbAudio, carAudio, airPlay.
* AVAudioSession.currentRoute \u2014 .inputs + .outputs of the
active route.
* AVAudioSession.setPreferredInput(port) \u2014 switch the input
(HFP / wired / USB / car audio also move output to themselves).
* AVAudioSession.overrideOutputAudioPort(.speaker | .none) \u2014
toggle built-in speakerphone vs receiver/earpiece.
* AVAudioSession.routeChangeStream \u2014 live notifications when
the user plugs / unplugs / connects a device while the picker
is open.
This is exactly the same primitive Discord, WhatsApp, FaceTime
use for their VoIP audio chooser. No native UI plugin needed.
New widgets in voice_compact.dart:
* _AudioOutputTile: shows the active output port name (Speaker /
iPhone / AirPods / 'Phil's Wired Headset' / etc.) with the
matching icon. Subscribes to routeChangeStream for live
updates. Tap opens _AudioOutputPickerSheet.
* _AudioOutputPickerSheet: bottom sheet with 'Choose audio' title
and a Discord-style list:
- Speaker (volume_up)
- iPhone (phone_in_talk; the receiver/earpiece)
- <BT name> (bluetooth_audio)
- <Wired headset> (headset)
- <USB / Car> (usb / directions_car)
Selected row is highlighted + has a check mark. Tap routes:
- Speaker -> overrideOutputAudioPort(.speaker)
- iPhone -> overrideOutputAudioPort(.none) + setPreferredInput(builtInMic)
- External -> overrideOutputAudioPort(.none) + setPreferredInput(port)
* _PickerRow: shared row widget with selected/check styling.
AppDelegate.swift is unchanged: the manual AVAudioSession
.setCategory(playAndRecord / .voiceChat) we already do at launch
(
|
||
|
EdisonJwa
|
7c62d14dd8 |
feat(ui,ios): inline mode+tail into voice sheet, fix Unknown audio route, tap-outside unfocus
Three user-reported issues addressed at once.
1. Audio output displaying as Unknown on iOS
The route tile only set _device from currentDeviceStream events,
which fire on route *changes*. On first sheet open with no route
change yet, _device was null \u2192 _deviceLabel fell through to
audioRouteUnknown.
Fix: query AudioRouterPlatform.instance.getCurrentDevice() in
initState before attaching the stream listener. Plugin returns the
current AVAudioSession route synchronously (well, via Future) so
the tile renders Speaker / iPhone receiver / AirPods / etc.
immediately on first open. Errors swallowed \u2014 the stream remains
authoritative for subsequent updates.
2. 'Adjust mode & release tail' too deep (chip \u2192 modal \u2192 button \u2192 dialog)
Inlined the mode radio buttons and release-tail slider directly
into the voice modal sheet. Dropped the OutlinedButton 'Adjust'
trigger and the nested VoiceSettingsDialog dispatch entirely on
mobile.
Modal sheet is now a single-screen control panel:
Title 'Voice'
--------
Audio output: <current route> > (iOS/Android only)
--------
Transmit mode
\u25c9 PTT
\u25cb Continuous
\u25cb Voice activity (Coming soon) (disabled)
--------
Release tail 200 ms
[\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u25cf\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501\u2501] (0\u20131000 ms, step 50)
Bound key: F (desktop only)
--------
Level meter
TX/RX frame counts
PTT capability badge (desktop only)
VoiceSettingsDialog is retained for the wide-mode VoiceBar
'configure' button (desktop entrypoint) and the PTT-bind flow, so
desktop UX is unaffected.
New widgets: _VoiceSheetBody (StatefulWidget with local _mode +
_tail), _ModeRow (RadioListTile-shaped row with optional disabled
state for VoiceActivity). New API on showVoiceDetailsSheet:
onModeChanged + onReleaseTailChanged callbacks (replace
onAdjustVoiceSettings). Wiring in main.dart writes through to
rust.setTransmitMode / rust.setReleaseTailMs and mirrors _state.
l10n: dropped voiceAdjustSettings (en + zh). Added voiceBoundKeyLabel
(en + zh) for the desktop-only bound-key row.
3. iOS first-tap-keyboard regression (flutter/flutter#181474)
The
|
||
|
EdisonJwa
|
b8e9c8549e |
feat(ui,ios,android): audio output route picker + collapse voice controls into single modal
Two user-reported issues addressed:
1. 'on supported devices such as iphone or android user should be
able to select audio device such as speaker or airpods or phone'
2. 'the bottom folder is duplicated with the app bar settings'
Issue 1 \u2014 audio output route picker:
Added the audio_router 1.1.1 plugin (MIT, supports iOS + Android)
which renders the platform-native picker:
* iOS: Apple AVRoutePickerView system sheet \u2014 the same UI as
Control Center's audio chooser. Lists Speaker / iPhone receiver /
AirPods / connected Bluetooth devices / AirPlay / CarPlay.
System manages the device list; we don't have to track route
changes manually.
* Android (post-rc.8 when we wire the platform): Material Design 3
dialog backed by AudioManager.setCommunicationDevice() with
SCO Bluetooth + USB headsets filtered for VoIP.
The picker prerequisite documented by the plugin (audio session
must be playAndRecord/voiceChat before the picker fires) is already
satisfied by our AppDelegate.swift configuration from commit
|
||
|
EdisonJwa
|
3b08ea9d32 |
feat(ui,mobile): Plan E voice UI -- status chip + bottom-anchored PTT + AppBar mutes
Restructure the narrow / mobile body layout around three principles
(Hoober thumb-zone research validated, Material 3 components):
1. Channel tree gets ~85% of the screen height.
2. Live voice state is always visible in a 2-line status chip
above the PTT button.
3. PTT button is wide, bottom-anchored (thumb-natural lower zone).
4. Frequent toggles (mic mute, headset mute, voice settings) live
in the AppBar so they don't compete with the channel tree.
5. Non-essential live readouts (level meter, TX/RX, capability
badge) live in a modal sheet opened by tapping the status chip
-- progressive disclosure.
apps/chanora_flutter/lib/widgets/voice_compact.dart (new file)
* VoiceStatusChip: 2-line live readout. Line 1 = mode + bind hint;
Line 2 = release-tail + 'Mic on/off'. Tap opens
showVoiceDetailsSheet.
* VoicePttButton: 56 dp wide bottom-anchored Push to Talk button.
Same touch-and-hold gestures as the previous _PttHoldButton.
* showVoiceDetailsSheet: modal bottom sheet with mode recap +
bind/tail hint + level meter + TX/RX counts + PTT capability
badge (desktop-only).
apps/chanora_flutter/lib/main.dart
* AppBar gains mic-mute, headset-mute, voice-settings icons when
in voice channel AND MediaQuery width < 840 dp (mobile only).
Wide mode keeps these controls inside the existing VoiceBar
widget unchanged.
* AppBar title becomes a Row of 'app name + channel chip' when
in voice channel.
* Narrow-mode body restructured: Expanded(channelTree) +
VoiceStatusChip + VoicePttButton (latter only when in voice
channel AND PTT mode). The old narrow-mode VoiceBar is gone;
wide-mode VoiceBar is unchanged.
* New _onOpenVoiceDetailsSheet handler bridges the chip-tap to
showVoiceDetailsSheet.
* New top-level helper _isTouchOnlyPttHost mirrors the helpers
in widgets/voice_bar.dart and widgets/voice_settings.dart so
the AppBar + narrow-mode chip can branch consistently.
apps/chanora_flutter/lib/l10n/app_en.arb
apps/chanora_flutter/lib/l10n/app_zh.arb
apps/chanora_flutter/lib/l10n/generated/* (regenerated)
* New string voicePttHoldHint = 'Hold the button' / '按住按钮'.
Surfaced in line 1 of VoiceStatusChip on touch-only hosts and
in the modal sheet's PTT line where the desktop equivalent
would name a bound key.
Wide-mode (>= 840 dp) layout intentionally unchanged so the
signed-off rc.8 desktop verification still applies.
flutter analyze: clean (6 pre-existing Radio.groupValue infos).
Local cargo + flutter analyze pass; Mac was offline at commit
time so iOS device build verification is pending the next sync.
|
||
|
EdisonJwa
|
d4c04b6a72 |
fix(ui,audio,ios,macos): eight P0 mobile fixes
User report from sideloaded iPhone build, in order of priority: #4 'Could not join channel: audio: audio backend: build_output_stream: The requested stream configuration is not supported by the device.' Cause: we forced cpal::BufferSize::Fixed(2048) on the output and input streams unconditionally on non-Linux. iOS CoreAudio RemoteIO units reject arbitrary buffer-size requests with that exact error. Windows WASAPI needs the pinning for shared-mode jitter, but macOS / iOS do not. Fix: cfg-gate Fixed(2048) to target_os = 'windows'; everywhere else use BufferSize::Default and let the platform HAL pick. crates/chanora_audio/src/engine.rs. #5 'Could not join channel: invariant violated: voice_in already taken' Cause: start_audio tore down the old engine BEFORE attempting to construct the new one, and consumed voice_in (an mpsc Receiver that can only be taken once) early. When the new engine failed mid-construction (e.g. because of #4 above) the session was left with: no audio engine, voice_in consumed, no way to retry without reconnect. The second voice_join attempt surfaced the invariant message. Fix: build the new engine BEFORE tearing down the old. Only swap state.audio if construction succeeded. crates/chanora_ core/src/lib.rs::ChanoraSession::start_audio. Additionally added a put_voice_in helper to the protocol adapter ( crates/chanora_protocol/src/adapter.rs) for a future broadcast-channel migration; the helper is unused on the immediate fix path but documents the intent. #3 'permission request would better on first open' Cause: AVAudioSession only triggers the mic-permission prompt the first time it tries to record. We never recorded until voice_join, so the prompt fired then. Fix iOS: AVAudioSession.sharedInstance().requestRecordPermission in AppDelegate.swift::application(_:didFinishLaunchingWithOptions:). Fix macOS: AVCaptureDevice.requestAccess(for: .audio) in macos/Runner/AppDelegate.swift::applicationDidFinishLaunching. Both run non-blocking; user can deny without crashing app launch, and voice_join then surfaces a clearer downstream error when the engine fails to open the input device. #1 + #2 'one-column upper takes too much space; Push to Talk button at bottom would be better' Layout rework for narrow-mode (single column, mobile shape): - Flipped the stacking order in main.dart so Voice Bar moves to the BOTTOM of the body and the channel tree (Expanded) fills above. Wide-mode (Row, >= 840 dp) layout unchanged. - Inside the Voice Bar on touch-only hosts, moved the on-screen Push to Talk button to be the LAST element of the Voice Bar (was Row 3). Order now: pill + mutes, mode badge + settings, level meter, stats line, release-tail caption, PTT button. The button is closest to the user's thumb when the Voice Bar is pinned to the bottom of a narrow-layout screen. #6 'remove right top debug badge' debugShowCheckedModeBanner: false on the MaterialApp. Release builds never showed it anyway; this only affects local dev / debug builds. #7 'what does the refresh button use for? nothing happened' Removed. The snapshot updates via BridgeEvent::SnapshotChanged are pushed from the bridge — a manual rust.snapshot() call was redundant. Now only the Diagnostics + Disconnect actions remain in the AppBar trailing row when connected. #8 'Bind Key related function should not be added to a mobile platform' widgets/voice_settings.dart: bind-key OutlinedButton is now #cfg'd out when Platform.isIOS || Platform.isAndroid. The release-tail slider stays because it still applies to the on-screen PTT button. Capability badge in voice_bar.dart also hidden on mobile (it would always show L0Focused which is redundant with the visible on-screen button). Tests + analyze: chanora_audio 34/0/0 on macOS, workspace 78/0/1 on Linux; flutter analyze clean (6 pre-existing Radio.groupValue infos). flutter build ios --release --no-codesign: 28.8 s clean (Runner.app 29.9 MB). |
||
|
EdisonJwa
|
278df25fd7 |
feat(ui,ptt): on-screen touch-and-hold PTT button for iOS / iPadOS / Android
iOS / iPadOS / Android have no hardware keyboard for the user to
bind a PTT key on. Up to now the VoiceBar showed only a
'Push to talk: bound key —' hint that didn't lead anywhere usable.
Add a touch-and-hold on-screen PTT button rendered only on
touch-only platforms (Platform.isIOS || Platform.isAndroid; web
hosts and desktop continue to use the hardware-key path
unchanged).
apps/chanora_flutter/lib/widgets/voice_bar.dart:
* New module-private `_isTouchOnlyPttHost` predicate.
* VoiceBar gains an `onPttHeldChanged: ValueChanged<bool>`
constructor param. Desktop callers wire it but never invoke it
because the button is not rendered there.
* Row 3 (the PTT-only secondary content) now branches:
- on touch-only hosts -> renders the new `_PttHoldButton` plus
a small release-tail hint underneath
- on hardware-keyboard hosts -> renders the same bound-key +
release-tail one-liner as before, unchanged.
* New `_PttHoldButton` StatefulWidget. Uses a single
GestureDetector covering onTapDown / onTapUp / onTapCancel /
onPanDown / onPanEnd / onPanCancel so the held edges fire on
finger-down and the released edge fires when the user lifts
OR drags off OR another gesture in the arena wins. Visual
feedback mirrors the level-meter active flag.
apps/chanora_flutter/lib/main.dart:
* New `_onOnscreenPttHeldChanged(bool held)` method that calls
`rust.setPtt(active: held)`. The bridge's set_ptt routes the
edge through the same release-tail timer + transmit-mode
selector that desktop hardware keys use (SDD-096 / SAD-083),
so behaviour parity is preserved.
flutter analyze: clean (6 pre-existing Radio.groupValue infos).
flutter build ios --release --no-codesign: clean (Runner.app 29.9 MB).
DEC-025: iPhone + iPad + Android in scope; this commit makes PTT
mode actually usable on those platforms. The 'Focused' capability
badge wording in ios-p0-acceptance.md / ipad-p0-acceptance.md
already documents the on-screen button as the only PTT input;
this commit makes that documentation true.
|
||
|
EdisonJwa
|
25b5bb3a6d |
fix(ui): wide-mode banner placement + channel-pill overflow
Two related VoiceBar / scaffold issues on wide windows: 1. Banner placement The 'not production ready' tertiaryContainer banner sat full-width above the body Column. In wide layouts (>=840 dp) where the connected view splits into Voice Bar (320 dp) + channel tree (Expanded), the banner spanned both columns and dwarfed the channel-tree pane. Rework: wrap the body in an outer LayoutBuilder so the placement decision can read bodyConstraints.maxWidth. When wide AND connected AND snapshot != null, render the banner inside the left 320 dp SizedBox above the VoiceBar. In every other state (narrow, idle, connecting) the banner stays pinned full-width at the top. 2. Channel-name pill overflow The Container holding the channel pill had no width constraint and Text(channelName) had no overflow handling. Long channel names made the pill extend past the column's 320 dp; mute icons slid under the adjacent channel tree. Rework: pill wrapped in Flexible(flex: 100, fit: FlexFit.loose); inner Text gets maxLines: 1, overflow: TextOverflow.ellipsis, softWrap: false. Spacer keeps default flex 1; the 100:1 ratio means short names hug their intrinsic width and long names take ~99% of the remaining space then ellipsize. Mute icons stay pinned right. flutter analyze: clean (6 pre-existing Radio.groupValue infos only). |
||
|
EdisonJwa
|
181b3368d4 |
fix(audio,voice,log): six P0 issues from Korean Windows test
1. Voice Bar 'Leave voice' button removed entirely. TeamSpeak users are always in some channel; Discord/Mumble-style leave is the wrong model. To stop being heard / hearing, mute mic / speaker. To physically move, tap a different channel. The voiceLeave bridge call + _onLeaveVoice stay as dead code for now (marked unused) so existing tests/integrations don't break. 2. voice_join now confirms the move actually applied server-side by polling the snapshot for up to 1.5 s and matching our own client's channel against the requested one. If the server rejected the move (no permission, wrong password, channel full), voice_join rolls the selector back to in_channel=false and returns Err so the UI surfaces the failure instead of showing a fake 'joined' state. 3. ServerSnapshot + BridgeSnapshot gain own_client_id so the UI can identify our row without name-matching. find_own_in reads it directly. 4. set_self_muted now also clamps the TransmitModeSelector's hard_mute when input is muted server-side. Without this, the Opus encoder kept producing frames after setInputMuted(true), tsclientlib refused each one with 'Sending audio while muted', and the log grew to 200 MB on the Korean host. 5. tsclientlib WARN spam suppressed via tracing filter (tsclientlib=error). Belt-and-braces on top of fix 4. 6. Log file is now rotated at every launch (not just when >4 MiB). Two generations kept: chanora.log.1 (previous) and chanora.log.2 (the one before). The bug that produced 200 MB files was a chatty subsystem flooding a single session; the per-launch rotate keeps disk use bounded by what one session can produce in its lifetime. Bonus Windows fix (separate from the six but found in the same log): the Raw Input + Hook backends now signal readiness BEFORE blocking on GetMessageW. Previously init_tx.send was called after the loop returned (i.e. on WM_QUIT, which never happens during arming), so the main thread's 2 s readiness probe always timed out and the backend reported L0Focused even when registration succeeded. Both run_raw_input_loop and run_hook_loop now take an init_tx parameter and call report!(true) right after a successful registration, and report!(false) on every early-fail return. cargo check --workspace: clean. cargo test --workspace --lib: 80 passed / 0 failed / 1 ignored. flutter analyze: clean (6 pre-existing Radio.groupValue infos). |
||
|
EdisonJwa
|
6d4975bd6e |
fix(ptt,ui): Continuous mode no longer self-disables after 30 s; rename PTT label to Mic
Issue 1: in Continuous transmit mode the talk indicator turned
gray-out / mic disabled after ~30 s and could only be revived by
toggling mic mute. Root cause: SAD-079 MissedKeyUpWatchdog
subscribed to AudioTransmitGate.transmit_active and force-cleared
it after 30 s of true. In PTT mode this is correct (stuck key =
bug). In Continuous mode transmit_active is *supposed* to stay
true indefinitely; the watchdog assumption doesn't hold.
Fix: the watchdog now subscribes to a new ptt_held watch on the
TransmitModeSelector (the raw key-state input, not the resolved
gate). In Continuous mode ptt_held is never set true, so the
watchdog never fires. In PTT mode it still fires on a stuck
key-down as before. The session owns the watchdog (was on the
engine) so it survives engine restarts; it's spawned lazily on the
first start_audio.
MissedKeyUpWatchdog gains spawn_on_signal(rx, on_timeout, timeout)
alongside the existing spawn(gate, timeout) — old shape preserved
for backwards compat. run_watchdog generalised to take any
watch::Receiver<bool> + Box<dyn Fn() + Send + Sync>.
Two new tests:
- watchdog_on_signal_does_not_fire_when_ptt_held_stays_false
(the Continuous-mode regression test)
- watchdog_on_signal_fires_when_signal_stays_true
(the stuck-key case still fires)
Issue 2: the Voice Bar stats line said 'PTT on/off' even when the
user was in Continuous mode where no PTT key is involved. Renamed
to 'Mic on/off' (mode-neutral) and l10n-ised the on/off literal:
- en: 'Mic on' / 'Mic off'
- zh: '麦克风 开启' / '麦克风 关闭'
cargo test --workspace --lib: 80 passed / 0 failed / 1 ignored
(was 78, +2 watchdog tests).
flutter analyze: clean (6 pre-existing Radio.groupValue infos).
|
||
|
EdisonJwa
|
82b99ebcff |
feat(ui,voice): add speaker mute button to VoiceBar
Speaker (output) mute existed in the legacy _AudioControls widget and the rust.setOutputMuted bridge call but was lost when SDD-097 replaced _AudioControls with VoiceBar. Mic mute carried over; speaker mute did not. Wire it back: VoiceBar gains an outputMuted prop + onToggleOutputMute callback and renders a headset/headset_off icon next to the existing mic mute. main.dart wires the existing _toggleOutputMute handler (previously dead-code with // ignore: unused_element). The bridge call setOutputMuted already does both effects together: local engine silencer + server-broadcast ClientOutputMuted flag. l10n: rename voiceHardMuteLabel to 'Mute microphone'/'麦克风静音' to distinguish from the new voiceOutputMuteLabel 'Mute speakers'/ '扬声器静音'. flutter analyze: clean (6 pre-existing Radio.groupValue infos). |
||
|
EdisonJwa
|
64878e3a7d |
fix(ui,voice): consolidate to single Voice settings entry point
The capability badge had its own 'Configure' TextButton that opened the bind-key flow, while the Voice Bar's settings gear also reached bind-key through the settings dialog. Two paths, same destination — confusing and pointless duplication that the user flagged. Resolution: the gear is the only configuration entry point. The capability badge becomes information-only — it still shows the detected PTT level + backend and (for L0Focused) the info-icon explanation sheet, but no Configure button. The badge no longer takes or props. The Voice Bar drops the callback added in |
||
|
EdisonJwa
|
6a41a0b4db |
fix(ui,voice): five Voice Bar / settings UX bugs
1. Hard-mute now informs the server (setInputMuted) in addition to clamping the local TransmitGate. Without the server-side flag, other clients keep seeing us un-muted; without the local clamp a beat of in-flight audio leaks through. Drive both together so the mic icon and the actual silence land at the same time. 2. Split the badge's Configure affordance from the Voice Bar's 'Voice settings' gear. The gear opens the mode + release-tail dialog (onConfigure); the badge's configure opens the bind-key capture flow directly (new onBindKey). Previously both routed to the settings dialog, so 'Voice settings' and the badge's 'Configure' were the same screen — useless duplication. 3. Bind-key label is now PTT-only. The mode-badge row no longer prints 'PTT: Space' when Continuous / Voice Activity is selected. A new PTT-only secondary line carries the bound key plus the release-tail value together, hidden entirely for non-PTT modes. 4. Release-tail row is now PTT-only in BOTH the Voice Bar and the Voice settings dialog. The dialog previously kept the slider visible across all modes; switching to Continuous left the user staring at a control that did nothing. 5. PTT capability badge is now PTT-only. In Continuous and Voice Activity modes there is no key binding to surface a capability for, so the 'L0Focused (focused)' line + its info sheet and the Configure button disappear from the Voice Bar when the user isn't in PTT mode. All five fixes are pure UI; no Rust changes needed. flutter analyze remains clean (6 pre-existing Radio.groupValue deprecation infos). |
||
|
EdisonJwa
|
ba444d94bd |
feat(audio,bridge,flutter): v1 audio + PTT lifecycle implementation (SDD-094..097)
Implement the SDD-094 / SDD-095 / SDD-096 / SDD-097 detailed designs
committed in
|