chanora/docs/references/yatqa-offline-reference.md

YaTQA Offline Reference — TeamSpeak 3 Protocol Documentation

Source: https://yat.qa/ressourcen/ (German pages)
Author: Janni "Яedeemer" K.
Fetched: 2026-06-11
Purpose: Offline reference for Chanora development — protocol details, error codes, undocumented features

Note: The German pages contain significantly more detail than the English pages. This document captures ALL German-only content.

---

Table of Contents

1. Definitions and Algorithms
2. Server Query Comments
3. Server Query Notify
4. Variable Parameters
5. Voice Client Anti-Flood
6. Security Level (Hashcash)
7. Snapshots
8. Other Protocols
9. Server Error Codes
10. Permission IDs
11. Client Versions
12. Badges

---

1. Definitions and Algorithms

1.1 Codecs

Codec bitrates (b_Raw in bytes/s):

Codec \ Quality	0	1	2	3	4	5	6	7	8	9	10
Speex Narrowband (8kHz)	300	500	750	1000	1400	1900	2300	3100
Speex Wideband (16kHz)	500	750	1000	1250	1600	2100	2600	3000	3500	4300	5300
Speex Ultra-wideband (32kHz)	550	950	1200	1450	1850	2350	2800	3200	3700	4500	5500
CELT Mono (48kHz)					4000	5000	6000	8000	12000
Opus Voice	550	1050	1550	2050	2600	3100	3600	4100	4650	5150	5650
Opus Music	900	1800	2700	3600	4500	5400	6300	7200	8100	9000	9900

Key formulas:

• b_Official = floor(b_Raw + 45 byte / t)
• d = b_Raw * t + 45 byte ≤ d_Max
• d_Max ≈ 527 ± 1 byte (MTU)
• t_Max(Opus) = 20 ms
• t_Max(Speex/CELT) = floor((527±1 - 45) / (b_Raw * 50)) * 20 ms

MTU explanation: 528 bytes (TS-MTU) + 40 bytes (IPv6 header) + 8 bytes (UDP header) = 576 bytes (old modem/ISDN MTU).

Opus is VBR — bitrate varies ±250 bytes/s at quality 6. Max deviation needed to reach d_Max is ~144% (never happens in practice).

1.2 Permission System

Permission tiers (evaluated top to bottom, lowest wins):

Tier	Level	Description
0	Server Groups	Highest value wins (unless Negate flag)
1	Client (Server level)	Client-specific server permissions
2	Channel	Skipped if Skip flag set
3	Channel Group	Skipped if Skip flag set
4	Client (Channel level)	Client-specific channel permissions

Skip flag: Skips channel and channel group permissions. Determined by:

1. If client permission set → use its skip flag
2. If no client permission → use effective server group's skip flag
3. If groups with Negate flag → only Negate groups count
4. If multiple groups remain → lowest ID wins

Negate flag: If ANY server group has Negate flag set, only groups WITH Negate flag count. Lowest ID among Negate groups wins. Even if non-Negate groups have lower IDs.

Grant permission: Tells how much i_client_permission_modify_power needed to change a permission. Grant permission name = replace first letter of original permission with i_needed_permission_modify_power.

b_client_skip_channelgroup_permissions: If set in first two tiers, ALL channel group AND channel permissions are ignored.

1.3 Query Connection

Timeout behavior by version:

Versions	Timeout	Paragraph	Space+Enter	Command+Enter
– 3.2.0	10 min	yes	yes	yes
3.3.0-beta1 – beta2	5 min	no	no	no
3.3.0-beta3 – 3.3.1-steadyclock	5 min	no	no*	yes
3.3.1 –	5 min	no	yes	yes

*Sending just a command keeps client on server forever (exploitable).

Character encoding: TeamSpeak claims UTF-8 but actually uses UCS-2 (BMP only). Mobile apps use CESU-8. Server 3.2.0 adds partial SIP support (emoji ranges).

Line terminator: 0x0A 0x0D (Windows format, reversed).
Max line length: 9203 bytes (excluding line terminator). Not limited for 12 permission add/remove commands and serversnapshotdeploy.

1.4 Icons

• Max dimensions: 16×16
• Filename = CRC32 of icon data (same algorithm as PNG/ZIP)
• Cannot be animated

Data types for icon IDs vary by context:

Context	Parameter	Read	Write
*permlist, *addpermsid	permsid=i_icon_id value=	signed	signed
clientlist -icon, clientinfo	client_icon_id=	signed	via clientaddperm only
serverinfo, serveredit	virtualserver_icon_id=	signed	unsigned
channellist -icon, channelinfo	channel_icon_id	signed	unsigned

1.5 Avatars

• Max dimensions: 300×300
• Avatar flag = MD5 hash (not a boolean)
• Stored in channel ID 0
• Filename derived from Global ID (not from avatar flag)
• Algorithm: Base64-decode the Global ID → 20 bytes → display with [a-p] instead of [0-9a-f]

Example calculation:

• UID: yGRWD2BOWPC6xSROXoi7U8NAljI=
• Base64 decode → 20 bytes → hex: C86456... → filename: migefg...

1.6 Snapshots

• File starts with SHA1 hash of remaining UTF-8 data (excluding trailing newline)
• Internally runs normal Query commands when deploying
• If serveradmin is added to a server group, snapshot may fail on newer servers

1.7 Client Cache

• Subfolder names = Base64-encoded Server UID (double-encoded to avoid / in filenames)
• Avatars in cache/clients/, Icons in cache/icons/
• Private chat partners in chats/clients/ (also Base64-encoded UIDs)

1.8 BBCode

• Max stack size: 20
• 10 tags can be active simultaneously
• Self-closing tag [hr] doesn't count toward stack but can't be used at 20

Inline elements: [b], [i], [u], [color=X], [url=URL]Text[/url], [url]URL[/url]

Block elements (channel descriptions only): [hr], [size=X], [img]URL[/img], [left], [center], [right], [list][*]Text[/list]

Internal links:

• client://{ClientID}/{ClientUID}~{Name}
• channelid://{ChannelID} (0 = server)
• ts3file://{Serveraddress}?port={Port}&serverUID={UID}&channel={ChannelID}&path={Path}&filename={Filename}&isDir={0|1}&size={Bytes}&fileDateTime={UnixTimestamp}
• ts3image://{Filename}?channel={ChannelID}&path={Path}

External links:

• ts3server://{Serveraddress}?port={Port}&nickname={Nickname}&password={Password}&channel={ChannelName}&cid={ChannelID}&channelpassword={ChannelPassword}&token={Token}&addbookmark={BookmarkName}

Colors: W3C color names + #123456 + #123 + transparent

Font sizes (since client 3.0.3): Measured in points (pt). Legacy HTML sizes [size=+X] don't work — + prefix resets to default.

---

2. Server Query Comments

2.1 General

• login failure logs you out if already logged in
• use with non-existent server returns "server not running" error
• use does NOT auto-start stopped servers — must use -virtual flag
• return_code parameter available on every command

2.2 Key Command Issues

serveredit: virtualserver_ask_for_privilegekey setting gives error 1538 (invalid parameter).

serversnapshotdeploy:

• With use → overwrites selected server; without → creates new server
• Returns sid and virtualserver_port when creating new server
• Port not preserved from snapshot when creating new
• -mapping flag must come before snapshot data

servernotifyregister:

• Undocumented parameter event=tokenused
• Invalid event values require another parameter, then fail with parameter error
• id=0 stands for all channels (gives duplicate events)

sendtextmessage: targetmode=2 (channel) and targetmode=3 (server) don't require target parameter.

clientlist: Undocumented -badges switch exists.

clientedit: Only client_description and client_is_talker can be modified.

clientdblist: duration is entry count (max 200), not a time duration. -1 = maximum.

clientdbfind:

• Uses SQL LIKE matching: % = wildcard, _ = single char
• Backslashes must be doubled
• Undocumented -details switch returns: unique_identifier, nickname, lastconnected, totalconnections, lastip
• Limited to 50 results

clientdbedit: Only client_description can be changed.

clientgetnamefromuid: Also returns cldbid — better than clientgetdbidfromuid.

clientkick: Clients to kick must come LAST in parameter list. QueryManual example is wrong.

clientpoke: Cannot poke multiple clients simultaneously (despite QueryManual claiming otherwise).

privilegekeyadd: tokencustomset is a self-parameterized string (spaces between params). Individual idents/values must be escaped before the entire string is escaped. QueryManual example is wrong.

2.3 Undocumented Commands

plugincmd: Parameters: name, data, targetmode (0-3), target. Only works on virtual servers. No longer allowed from Query clients.

dummy_connectionlost: Same as logout but doesn't fail if not logged in. If on a server, kicks you (connection lost). You remain invisible on instance.

verifyserverpassword / verifychannelpassword: Both return "not on a server" if not connected, or "command doesn't exist" if connected. Both non-functional.

channelcreateprivate: Returns error 2 (not implemented).

cmd_custom_unknown_command: Returns error 256 (command not found) — intentional.

---

3. Server Query Notify

3.1 Subscription Behavior

• Subscriptions disappear on logout, re-login, or server switch
• Must subscribe individually (no array parameter)
• Can only have ONE channel subscription at a time
• id=0 = all channels (gives duplicate events)
• Existing subscriptions persist even if permissions revoked

3.2 Events

notifycliententerview (server + channel)

Fields: cfid, ctid, reasonid, clid, client_unique_identifier, client_nickname, client_input_muted, client_output_muted, client_outputonly_muted, client_input_hardware, client_output_hardware, client_meta_data, client_is_recording, client_database_id, client_channel_group_id, client_servergroups, client_away, client_away_message, client_type, client_flag_avatar, client_talk_power, client_talk_request, client_talk_request_msg, client_description, client_is_talker, client_is_priority_speaker, client_unread_messages, client_nickname_phonetic, client_needed_serverquery_view_power, client_icon_id, client_is_channel_commander, client_country, client_channel_group_inherited_channel_id, client_badges

notifyclientleftview (server + channel)

Fields: cfid, ctid, reasonid, invokerid, invokername, invokeruid, reasonmsg, bantime, clid

notifyserveredited (server)

Always reasonid=10. Reports new values for: name, codec_encryption_mode, default_server_group, default_channel_group, hostbanner_, priority_speaker_dimm_modificator, hostbutton_, name_phonetic, icon_id, hostbanner_mode, channel_temp_delete_delay_default

notifychannelchanged, notifychannelmoved, notifychanneledited, notifychannelcreated, notifychanneldeleted (channel)

notifyclientmoved (channel)

Fields: ctid, reasonid (0=self, 1=moved), invokerid, invokername, invokeruid, clid

notifytextmessage (textserver, textchannel, textprivate)

Fields: targetmode (1=private, 2=channel, 3=server), msg, target (only for private), invokerid, invokername, invokeruid

notifytokenused (tokenused — undocumented)

Fields: clid, cldbid, cluid, token, tokencustomset, token1 (group), token2 (0 for server token)

3.3 Reason IDs

ID	Meaning
0	Self channel change or server join
1	User or channel moved
3	Timeout
4	Channel kick
5	Server kick
6	Ban
8	Voluntary server leave
10	Server or channel edited
11	Server shutdown

---

4. Variable Parameters

4.1 Client Variables

Key variables and their availability:

Variable	clientlist	clientinfo	notify	clientupdate	clientedit	clientdblist	clientdbinfo
cid	✓	✓	✓(ctid)
clid	✓	✓	N/A
client_unique_identifier	✓(uid)	✓	✓	✗		✓	✓
client_nickname	✓	✓	✓	✓	✓	✓	✓
client_input_muted	✓(voice)	✓	✓	✓(limited)	✗
client_output_muted	✓(voice)	✓	✓	✓(limited)	✗
client_database_id	✓	✓	✓	✗		✓(cldbid)	✓
client_servergroups	✓(groups)	✓	✓	✗
client_away	✓(away)	✓	✓	✓	✗
client_type	✓	✓	✓	✗
client_flag_avatar	✓	✓	✓(modified)	✗	✗	✓(limited)
client_description	✓	✓	✓	✓	✓	✓(limited)	✓(limited)
client_icon_id	✓(icon)	✓	✓	✗	✗	✓	✓
client_channel_group_id	✓(groups)	✓	✓	✗	✗
client_channel_group_inherited_channel_id	✓(groups)	✓	✓
client_base64HashClientUID	✓	✓(limited)

Notes:

• clientupdate with client_input_hardware=0 has 0 flood points (tab switch)
• client_flag_avatar is MD5 hash, not a boolean
• client_badges format: overwolf=0:badges=GUID1=GUID2=...

4.2 Channel Variables

Key variables:

Variable	channellist	channelinfo	notify(created/edited/moved)	channeledit	channelcreate
cid	✓	✓	✓	N/A
pid (parent)	✓	✓	✓(cpid)	✓(cpid)	✓(cpid)
channel_name	✓	✓	✓	✓	✓
channel_codec	✓(voice)	✓	✓	✓	✓
channel_codec_quality	✓(voice)	✓	✓	✓	✓
channel_maxclients	✓(limits)	✓	✓	✓	✓
channel_order	✓	✓	✓	✓(order)	✓(order)
channel_flag_password	✓(flags)	✓	✓	✓	✗
channel_icon_id	✓(icon)	✓	✓	✓(limited)	✗
channel_needed_talk_power	✓(voice)	✓	✓	✓	✓
channel_flag_private	✓	✗
seconds_empty	✓(secondsempty)	✓	✗
total_clients	✓	✗	✗

Notes:

• channel_flag_temporary doesn't exist at all
• channel_icon_id changes via channeledit are semi-permanent (lost on restart)
• channel_password returns Base64(SHA1(Base64(SHA1(plaintext)) + virtualserver_keypair)) for non-Query clients

4.3 Server Variables

All variables available in serverinfo. Key differences:

Variable	serverlist	serverinfo	serverrequestconnectioninfo	serveredit	notifyserveredited
virtualserver_name	✓	✓		✓	✓
virtualserver_maxclients	✓(limited)	✓		✓
virtualserver_port	✓	✓		✓
virtualserver_autostart	✓	✓		✓
virtualserver_icon_id	✓	✓		✓	✓
virtualserver_total_packetloss_total	✓	✓	✓(limited)
virtualserver_total_ping	✓	✓	✓(limited)

---

5. Voice Client Anti-Flood

5.1 General Rules

• Client starts with 0 points
• Every 0.5 seconds ("tick"): virtualserver_antiflood_points_tick_reduce points deducted (min 1)
• If b_client_ignore_antiflood → no points accumulated (but existing points still drain)
• Connection = 80 points (respects b_client_ignore_antiflood)
• b_client_ignore_bans bypasses IP block (but not anti-flood)
• Threshold: virtualserver_antiflood_points_needed_command_block blocks at EQUALITY

5.2 Flood Points Per Action

High-cost actions (25 points):

• banadd, banclient, complainadd, complaindelall, complainlist
• channelcreate, channeldelete, channelmove, channeledit
• clientmove (10), clientkick, clientpoke, clientedit
• servergroupaddclient, servergroupdelclient, setclientchannelgroup
• clientdbdelete, clientdbedit, clientdbfind (50!)
• messageadd, messagelist, textmessagesend (15)
• logview (50!)

Medium-cost actions (5-15 points):

• Most permission operations: 5 points
• Most group operations: 5 points
• File operations: 5 points (except ftinitupload/ftinitdownload = 0)
• channelsubscribe: 158 points!

Zero-cost actions:

• clientdisconnect, clientgetvariables, clientinit, clientinitiv
• setwhisperlist, ftgetfilelist, ftinitupload, ftinitdownload
• clientmute/clientunmute (0 with specific conditions)
• Internal client operations

5.3 Connection Flow

1. clientinitiv
2. clientinit
3. Set default channel (10 points)
4. Set badges (15 points)
5. permissionlist (5 points, if not cached)
6. clientgetvariables (0 points)
7. Subscribe channels (15-20 points)

---

6. Security Level (Hashcash)

6.1 How It Works

• Hashcash variant using SHA1
• Input: Public Key + unsigned 64-bit number (as string)
• Security level = number of leading zeros in 160-bit binary SHA1 hash
• Byte order: Big Endian, Bit order: Little Endian

6.2 Growth Rate

• Average 2^k hashes needed to reach level k from level 0
• Doubles for each additional level

Time estimates (2009, modern CPUs ~4x faster):

• Level 0-23: seconds
• Level 23-29: minutes
• Level 29-34: hours
• Level 35-39: days
• Level 40-43: months
• Level 44+: years

6.3 Optimization

• TeamSpeak uses single-threaded SHA1 (~1 MH/s on i5)
• Hashdog tool: multi-threaded, ~5 MH/s per core (~20-30x faster than TS)
• GPU (Hashcat): ~8.5 GH/s = 850,000% faster than TeamSpeak
• Level 33 on GTX 1080: ~1 second

---

7. Snapshots

7.1 What's Included

• Virtual server settings (except port) including keypair
• Channels
• Client database
• Permissions for local groups (both types), clients (both types), and channels
• Group assignments

7.2 What's NOT Included

• Server port (auto-assigned on deploy)
• Files
• Bans
• Complaints
• Offline messages (but unread count preserved)

7.3 Format

hash=Base64(SHA1(remaining_data))|snapshot_data

Sections:

1. virtualserver_* settings
2. end_virtualserver|begin_channels → channel list (tree order)
3. end_channels|begin_clients → client database (creation order)
4. end_clients|begin_permissions|server_groups → server group permissions
5. end_groups|iid=0 → server group memberships (by cldbid, then sgid)
6. end_relations|channel_groups → channel group permissions
7. end_groups| → channel group memberships
8. end_relations|client_flat → client permissions (server level)
9. end_flat|channel_flat → channel permissions
10. end_flat|channel_client_flat → client-channel permissions
11. end_flat|end_permissions

---

8. Other Protocols

8.1 Protobuf Format

Two key data types:

BigNum (Varint):

if x < 128: write byte x
else: write (x mod 128 OR 128), recurse with x >> 7

Binary data with length prefix: BigNum length + raw data

File format: Pairs of (BigNum identifier, data) until EOF.

• Identifier AND 7 = data type (0=BigNum, 1=64-bit, 2=binary, 5=32-bit)
• Identifier SHR 3 = field number

8.2 Update Protocol

• Current: Downloads ts3-client-2 from versions.teamspeak.com (Protobuf format)
• Contains: server version (3.0.10, outdated), stable/beta/alpha client versions
• Updater images: gzip compressed (despite .compress extension)

8.3 File Transfer

• Send key received from ftinitupload/ftinitdownload to server IP:port
• No escaping, nothing before/after
• Upload: send key then data
• Download: receive data from server

8.4 TSDNS

• Input → lowercase → UTF-8/CESU-8 → append 0x0A 0x0D 0x0D 0x0D 0x0A → TCP to port 41144
• Returns IP or 404
• $PORT = keep user's port

8.5 DNS Resolution Order

1. SRV TS3: _ts3._udp.INPUT — port overrides user input
2. SRV TSDNS: _tsdns._tcp.DOMAIN
3. TSDNS: Port 41144
4. DNS: AAAA, A records (CNAME implicit)

First complete resolution wins. No fallback on connection failure.

8.6 Blacklist (v1)

• UDP to blacklist.teamspeak.com:17385
• Send: ip4:RESOLVED_IP
• Response: x,13371337133 where x = 0 (blacklisted), 1 (OK), 2 (greylisted)
• No response → connect anyway

8.7 Blacklist2 (v2, since 3.1.6)

• HTTPS POST to blacklist2.teamspeak.com/check
• Content-Type: application/x-ts3blacklist
• Protobuf-encoded BlacklistInfoRequest with: ip_address, domain_name, virtual_server_id, public_license_id, port, timestamp, valid_token_present, slots_ok
• Response: 8 bytes Protobuf with status_ip, status_domain, status_virtual_server_id, status_public_license_id (1=INVALID, 2=BLACKLISTED, 3=GREYLISTED, 4=NOT_LISTED)

IPv6 canonicalization bug (3.1.6-3.1.7): Missing blocks filled with 3030 instead of 0. Fixed in 3.1.8-beta1.

8.8 Weblist (Server)

• UDP to weblist.teamspeak.com:2010
• Packet format: 1 byte version (always 1), 2 bytes sequence number, 1 byte type (1=key request, 2=data), payload
• Update cycle: request key → send data (key + port + slots + clients + flags + name)
• Server updates every 10 minutes, retries at 1.3s and 2s intervals

8.9 Badges

• Stored as GUIDs on server
• Binary list from badges-content.teamspeak.com/list (Protobuf format)
• Cached in cache/badges
• Refreshed every 24 hours

Protobuf structure:

1. BigNum: revision number
2. BigNum: Unix timestamp
3. For each badge: GUID, name, URL base, description, timestamp, unknown field (1-3)

---

9. Server Error Codes

Complete error code list (from English page):

Hex	Dec	Message
0x0000	0	ok
0x0001	1	undefined error
0x0002	2	not implemented
0x0100	256	command not found
0x0101	257	unable to bind network port
0x0200	512	invalid clientID
0x0201	513	nickname is already in use
0x0202	514	invalid error code
0x0203	515	max clients protocol limit reached
0x0204	516	invalid client type
0x0205	517	already subscribed
0x0206	518	not logged in
0x0207	519	could not validate client identity
0x0208	520	invalid loginname or password
0x0209	521	too many clones already connected
0x020a	522	client version outdated
0x020b	523	client is online
0x020c	524	client is flooding
0x020d	525	client is modified
0x020e	526	can not verify client at this moment
0x020f	527	client is not permitted to log in
0x0210	528	client is not subscribed to the channel
0x0300	768	invalid channelID
0x0301	769	max channels protocol limit reached
0x0302	770	already member of channel
0x0303	771	channel name is already in use
0x0304	772	channel not empty
0x0305	773	can not delete default channel
0x0306	774	default channel requires permanent
0x0307	775	invalid channel flags
0x0308	776	permanent channel can not be child of non permanent channel
0x0309	777	channel maxclient reached
0x030a	778	channel maxfamily reached
0x030b	779	invalid channel order
0x030c	780	channel does not support filetransfers
0x030d	781	invalid channel password
0x030e	782	channel is private channel
0x030f	783	invalid security hash supplied by client
0x0400	1024	invalid serverID
0x0401	1025	server is running
0x0402	1026	server is shutting down
0x0403	1027	server maxclient reached
0x0404	1028	invalid server password
0x0405	1029	deployment active
0x0406	1030	unable to stop own server in your connection class
0x0407	1031	server is virtual
0x0408	1032	server wrong machineID
0x0409	1033	server is not running
0x040a	1034	server is booting up
0x040b	1035	server got an invalid status for this operation
0x040c	1036	server modal quit
0x040d	1037	server version is too old for command
0x040e	1038	[to be completed]
0x040f	1039	[to be completed]
0x0410	1040	server blacklisted
0x0500	1280	database error
0x0501	1281	database empty result set
0x0502	1282	database duplicate entry
0x0503	1283	database no modifications
0x0504	1284	database invalid constraint
0x0505	1285	database reinvoke command
0x0600	1536	invalid quote
0x0601	1537	invalid parameter count
0x0602	1538	invalid parameter
0x0603	1539	parameter not found
0x0604	1540	convert error
0x0605	1541	invalid parameter size
0x0606	1542	missing required parameter
0x0607	1543	invalid checksum
0x0700	1792	virtual server got a critical error
0x0701	1793	connection lost
0x0702	1794	not connected
0x0703	1795	no cached connection info
0x0704	1796	currently not possible
0x0705	1797	failed connection initialization
0x0706	1798	could not resolve hostname
0x0707	1799	invalid server connection handler ID
0x0708	1800	could not initialize Input Manager
0x0709	1801	client library not initialized
0x070a	1802	server library not initialized
0x070b	1803	too many whisper targets
0x070c	1804	no whisper targets found
0x0800	2048	invalid file name
0x0801	2049	invalid file permissions
0x0802	2050	file already exists
0x0803	2051	file not found
0x0804	2052	file input/output error
0x0805	2053	invalid file transfer ID
0x0806	2054	invalid file path
0x0807	2055	no files available
0x0808	2056	overwrite excludes resume
0x0809	2057	invalid file size
0x080a	2058	file already in use
0x080b	2059	could not open file transfer connection
0x080c	2060	no space left on device
0x080d	2061	file exceeds file system's maximum file size
0x080e	2062	file transfer connection timeout
0x080f	2063	lost file transfer connection
0x0810	2064	file exceeds supplied file size
0x0811	2065	file transfer complete
0x0812	2066	file transfer canceled
0x0813	2067	file transfer interrupted
0x0814	2068	file transfer server quota exceeded
0x0815	2069	file transfer client quota exceeded
0x0816	2070	file transfer reset
0x0817	2071	file transfer limit reached
0x0900	2304	preprocessor disabled
0x0901	2305	internal preprocessor
0x0902	2306	internal encoder
0x0903	2307	internal playback
0x0904	2308	no capture device available
0x0905	2309	no playback device available
0x0906	2310	could not open capture device
0x0907	2311	could not open playback device
0x0908	2312	ServerConnectionHandler has a device registered
0x0909	2313	invalid capture device
0x090a	2314	invalid playback device
0x090b	2315	invalid wave file
0x090c	2316	wave file type not supported
0x090d	2317	could not open wave file
0x090e	2318	internal capture
0x090f	2319	device still in use
0x0910	2320	device already registered
0x0911	2321	device not registered/known
0x0912	2322	unsupported frequency
0x0913	2323	invalid channel count
0x0a00	2560	invalid group ID
0x0a01	2561	duplicate entry
0x0a02	2562	invalid permission ID
0x0a03	2563	empty result set
0x0a04	2564	access to default group is forbidden
0x0a05	2565	invalid size
0x0a06	2566	invalid value
0x0a07	2567	group is not empty
0x0a08	2568	insufficient client permissions
0x0a09	2569	insufficient group modify power
0x0a0a	2570	insufficient permission modify power
0x0a0b	2571	template group is currently used
0x0a0c	2572	permission error
0x0b00	2816	virtualserver limit reached
0x0b01	2817	max slot limit reached
0x0b02	2818	license file not found
0x0b03	2819	license date not ok
0x0b04	2820	unable to connect to accounting server
0x0b05	2821	unknown accounting error
0x0b06	2822	accounting server error
0x0b07	2823	instance limit reached
0x0b08	2824	instance check error
0x0b09	2825	license file invalid
0x0b0a	2826	virtualserver is running elsewhere
0x0b0b	2827	virtualserver running in same instance already
0x0b0c	2828	virtualserver already started
0x0b0d	2829	virtualserver not started
0x0b0e	2830	[to be completed]
0x0c00	3072	invalid message id
0x0d00	3328	invalid ban id
0x0d01	3329	connection failed, you are banned
0x0d02	3330	rename failed, new name is banned
0x0d03	3331	flood ban
0x0e00	3584	unable to initialize tts
0x0f00	3840	invalid privilege key
0x1000	4096	VoIP pjsua error
0x1001	4097	[to be completed]
0x1002	4098	[to be completed]
0x1003	4099	[to be completed]
0x1004	4100	[to be completed]
0x1005	4101	[to be completed]
0x1006	4102	[to be completed]
0x1007	4103	[to be completed]
0x1100	4352	provisioning invalid password
0x1101	4353	provisioning invalid request
0x1102	4354	no (more) slots available
0x1103	4355	pool missing
0x1104	4356	pool unknown
0x1105	4357	unknown ip location
0x1106	4358	internal error (tries exceeded)
0x1107	4359	too many slots requested
0x1108	4360	too many reserved
0x1109	4361	could not connect to provisioning server
0x1110	4368	authentication server not connected
0x1111	4369	authentication data too large
0x1112	4370	already initialized
0x1113	4371	not initialized
0x1114	4372	already connecting
0x1115	4373	already connected
0x1116	4374	not connected
0x1117	4375	io_error
0x1118	4376	invalid timeout
0x1119	4377	ts3server not found
0x111A	4378	unknown permissionID

---

10. Permission IDs

Source: https://yat.qa/resources/permission-ids/ (English)

See ReSpeak/tsdeclarations/Permissions.csv for the complete machine-readable list.

---

11. Client Versions

Source: https://yat.qa/resources/client-versions/ (English)

See ReSpeak/tsdeclarations/Versions.csv for the complete machine-readable list with version hashes.

---

12. Badges

Source: https://yat.qa/ressourcen/abzeichen-badges/ (German)

See ReSpeak/tsdeclarations/Badges.csv for the complete machine-readable list.

---

Fetched and compiled on 2026-06-11