The per-role log split renamed BOTH halves so that an un-updated reader would
fail loudly instead of silently reading half a session. It worked: CI found
four readers this way. This is them.
- MG_Util/Debug/Log.h: the role vocabulary now exists in the PULL build too,
header-only. It was wholly inside #if MOBILEGL_BUILD_DISAGGREGATED, so
PipeInputsTest - which builds in the verify flavour - could not name
ReadRoleLogs and took the whole build-linux-verify job down at compile time.
Inline rather than out-of-line because of G1: nothing in the library calls
these, so an inline definition emits code into the readers and NOTHING into
libMobileGL.so. Verified: pull symbols 30570 -> 30570, 0 added / 0 removed,
.text still 0xa52203, and zero role-log symbols in the pull library.
- PipeStatsWindow.h: the harness copy of the naming rule is now flavour-aware.
It derived `.client` in BOTH flavours, so in the verify build - one role,
MOBILEGL_LOG_FILE_PATH written unchanged - it opened a file that never
existed. The copy has to stay a copy: MG_Util's RoleLogPath is `t` (local)
in the shipping .so this module links, so calling it does not link.
Added LogMark/MarkLaneLog/ReadLaneLogSince: one offset PER ROLE, because a
single scalar over the concatenation slides by whatever the other role wrote.
- The four arming scenarios: they asserted on lines the BACKEND emits, and
under inproc the backend runs on the apply thread - the server role - so the
line lands in the server's log. Reading only the client's half reported the
emulation unarmed, i.e. accused the product of a defect the reader invented.
Four copies of the same private helper pair now delegate to the harness.
- scripts/ci/magma_runahead_checks.py: it unlinked and read the base name as
if it were a file, so the negative arm saw an empty log and could not prove
the knob took. It now imports split_log_paths' derivation - the authoritative
one - rather than becoming a third copy.
Local verification (WSL, lk-split + c6-pull):
- the 4 CI-red entries: 10/10 PASS under inproc, 10/10 under monolith
- unit role-log readers: 510/510 PASS
- magma_runahead_checks negative: run_ahead_0 EXPECTED_RED, restored GREEN
- the 5 affected TUs compile clean with MOBILEGL_BUILD_DISAGGREGATED=0
- G1: 0/0/0/0, .text 0xa52203
Red-once is the CI run itself (35677991453), which failed for each of these
reasons before the change.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The spawn work had the two roles append to one MOBILEGL_LOG_FILE_PATH under
O_APPEND. It was correct - two processes at one offset would corrupt the file,
O_APPEND made each write atomic - but it put two sessions' lines in one place
and made every per-side assertion a search. This splits the sink: the client
role writes <base>.client.log and the server role writes <base>.server.log.
THE BASE NAME NAMES NO FILE ANY MORE, AND THAT IS THE POINT. Leaving the
client at the old unsuffixed path would have been the compatible choice and the
wrong one: a reader that was not updated would go on finding a file, go on
passing, and go on seeing only half the session - and a refusal census that
reports a confident zero for the half it cannot see is worse than one that
fails. With both names moved, an un-updated reader gets "file not found" and
says so. There were 34 such readers; every one is moved here.
THE ROLE IS PER-THREAD, not per-process, because under inproc both roles are
threads of one process. Log.cpp keys the sink on a thread-local role: the apply
thread declares itself server (ServerLoop.cpp), a spawned image is server for
its whole life (MOBILEGL_IPC_ROLE=server, read once), and everything else is
the client. The naming rule (RoleLogPath) and the two whole-log operations
(ReadRoleLogs / TruncateRoleLogs) are EXPORTED from the library, so no reader
reimplements the derivation - a second copy is the copy that falls behind.
Readers, by how they read:
- unit mains set MOBILEGL_LOG_FILE_PATH and read a role file: they keep the
base in the env and derive the client path from the library helper.
- the death-test child runners (ReadLog) now concatenate BOTH roles: a death
test asserts the CHILD said something, and the applier's refusals - the very
diagnostics these check - are written under the server role.
- the offset-based Emit readers derive the client path once after setenv.
- PipeStatsWindow reads both, because draws/vbs increment in the backend's
PrepareForDraw - the apply thread, the server role - so the summary line is
in the server file even under inproc.
- run_trace_case.cmake's split census reads both files; the client keeps the
transport markers.
- split_log_paths.py (and its self-test, and the control stub) derive both
role files from the declared base.
- the Android script pulls both role files off the device and concatenates
them, so every downstream check is unchanged - and it judges a role file by
CONTENT, because `run-as test -f` through `exec-out` returned 0 for a missing
file on the device and `exec-out` folds cat's own not-found line into stdout.
The monolith arm legitimately has no server file, and that is a silent skip
rather than a one-line server log.
Guarded so a pull build is untouched: RoleLogPath and the role sink are wholly
inside MOBILEGL_BUILD_DISAGGREGATED; a non-disaggregated build writes the base
path exactly as before. G1 re-measured - 0 symbol diff, .text unchanged at
0xa52203.
Verified on device 2f7cbe2e: monolith writes only the client log (no phantom
server log), inproc and spawn each write both and pass their transport proofs
(spawn: server role in pid 16125). Unit 2353 (one pre-existing environmental
failure), integration-split 186/186, integration-spawn 102/102, retrace 6/6,
control smoke 12/12, split-log-paths self-test 9/9.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Exit gates 9.2 and 9.3. Until now nothing ran the integration suite across a
process boundary at all - the spawn shape was proven only by the retrace lane,
which exercises one trace per case and no scenario assertions.
integration-spawn: 102 cases, 102 green.
THE SET IDENTITY IS THE POINT, AND IT IS NOT MAINTAINED BY HAND. 9.2 asks that
the spawn lane's case-name set equal the split lane's. Registering the spawn
arm as a second copy of each block would satisfy that today and drift the first
time somebody adds a scenario to one of them - and a spawn lane covering LESS
goes green while proving less, with nothing about a smaller green lane looking
wrong. The eleven split-environment blocks become eleven calls to one macro
that emits BOTH arms from one filter, so a case added to either is added to
both or to neither.
scripts/ci/spawn_lane_parity.py asserts it anyway, because a macro is one edit
from a hand-written block. It compares SETS rather than counts - a count can
agree while the membership does not - and carries exactly one sanctioned
asymmetry, named in the file: integration-split also labels the PUSH-MONOLITH
arm, whose scenario is monolith-only by construction. R-16: introduce a
split-only block and it reds naming the case and the macro to use.
THREE CASES SKIP UNDER SPAWN, BY NAME. CtWireScenario reads PipeApplier's
in-process tallies through ServerVerbs(); under spawn those live in the SERVER's
process and this one's copy is 0 forever, so the assertions were failing about
somebody else's memory. That is a harness limit, not a product defect - the
records themselves cross, which the retrace lane proves. They are SKIPPED and
not deregistered: a case dropped from the registration would make the two sets
differ silently, which is the drift the macro exists to prevent. What retires
the skip is cross-process telemetry, which is also what S8's SessionFaultCount
needs.
TWO REAL REGRESSIONS THE EXISTING GATES CAUGHT, both from this refactor:
* the macro dropped the per-block TEST_LIST variables, which were what
SplitLogPaths fed to give every entry a PRIVATE MOBILEGL_LOG_FILE_PATH.
SplitLogPaths.PrivateAndDistinct went red naming the first orphan. The
macro accumulates list NAMES now, so a block added later is covered without
anyone remembering to extend a list - and the names have to be unique,
because gtest_discover_tests' TEST_LIST is populated when CTEST runs, not
at configure time, so one shared variable held only the last block's
entries. That matters more on the spawn arm: there TWO PROCESSES append to
the path, so a shared file interleaves two sessions rather than merely
being ambiguous.
* the configure_file that substitutes those names ran BEFORE the F1 and Ct
blocks registered, so it captured neither. Same gate, naming
F1WireScenario.ClearBufferfiPixels. It now runs last.
junit_tally gains --require-spawn-ran beside --require-split-ran: the prefix IS
the arm, and a shared flag would let one lane tally the other's entries and call
itself run. Verified to discriminate - the spawn junit reads 96/0/5 under its
own flag and 0/0/0 under the split flag, which correctly fails.
Two death tests follow the ADOPT_TIER message the census commit retagged with
Fatal{UnimplementedAdoptTier}; their regexes asserted the old wording.
Unit 2353 (one pre-existing environmental failure), integration-split 186/186,
integration-spawn 102/102, retrace 6/6, fatal census 0 unmarked, G1 0 symbols
and .text unchanged at 0xa52203.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
CONTRACT-P6 3.2 (D1c), 3.3 (D13) and 3.4 (D10).
Every guard below asked a question a SERVER PROCESS answers wrongly - "is a
ClientSession active" (never, there) or "am I on the apply thread" (every
thread is, there) - so all four were present, compiled, and permanently
disarmed in the one shape they exist for. That is worse than absent: it reads
as coverage.
D13 FIRST, THEN THE WIDENING. MGPipeRoleSplitActive() meant "the REHEARSAL
knob is on AND the transport is real", so widening it in place would have left
a narrow name describing a wide predicate. It is renamed to
MGPipeRoleSplitRehearsalActive() across its 12 sites - including the
DualBlockScenario assertion message that embeds it - and the wider predicate
is introduced BESIDE it.
MGPipeBlocksAreDistinct() IS TRUE FOR TWO DIFFERENT REASONS, which is the
whole point: under the rehearsal the two blocks are distinct objects in one
process; under SPAWN they are distinct because they are in different ADDRESS
SPACES, and no knob is involved. The spawn retrace runs with
role-split-state=0 - measured off the lane's own log - so every guard gated on
the rehearsal was off there.
THE CRASH. MGPipeServerBlockNoteIdentity early-returned on the rehearsal, so a
spawn server's gPipeInputs.ContextIdentity() stayed nullptr for the life of the
process. DirectGLES' framebuffer binding-slot memo compares that identity FIRST
and with NO generation, against a cache variable that also starts nullptr - so
nullptr == nullptr reads as a CACHE HIT and the function returns a slot pointer
nothing ever filled. `sm` widens the gate; `st` lands the named Fatal
PipeInputs.h had already asked for, so a reopening says which memo and which
identity instead of corrupting memory three frames later. Guarded on
MOBILEGL_PIPE_PUSH: in a pull build that identity is the live GLContext's
address and is never null, so the test would be dead code and G1 measures that.
DISJUNCTS, NOT SUBSTITUTIONS - and this was measured the hard way. The first
attempt REPLACED OnApplyThread() with MGPipeServerArm() and
ClientSession::Active() with MGPipeSessionLive(). 14 RemoteGuards and
RemoteClientControls cases went green by omission: a ServerLoop fixture with no
client session has only the original facts, so swapping them out disarmed every
test that drives the apply thread directly. The originals stay; the new
predicates are added beside them.
AND THE PROBE HAD TO BE THE RIGHT ONE. Installing
ClientSession::ApplyThreadIsInsideApplier as the apply-thread probe made every
GL-thread call a role violation whenever the applier happened to be busy - the
inproc retrace died on Fatal{RoleViolation, "MGPipeSlots"} raised from the GL
thread. "Am I the apply thread" and "is the apply thread inside the applier"
are different questions; the second is R-1's mutual-exclusion probe and is
about another thread entirely. ServerLoop::OnApplyThread is the one the guards
mean.
Three of D1c's six predicates land here, the three the four guards need. The
other three (MGPipeSplitActive, MGPipeShouldDial, MGPipeBackendIsLocal) have no
D10 site and are not added as dead code; their call sites are ContextEpoch and
ActiveXfbState, which this commit does not touch.
D14 holds: the non-disaggregated build gets constexpr false definitions, not
runtime-false predicates, so every consult folds at compile time. G1
re-measured - 0 symbol diff, .text unchanged at 0xa52203.
Two test names added, both falsifiable by construction: the spawn case asserts
the blocks are distinct with the rehearsal knob OFF, and the monolith case
asserts the predicate is not simply a constant. Unit suite 2353 tests, one
pre-existing environmental failure. All six OpenRA arms green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Magma's generate path (VulkanRenderer::GenerateMipmap) took its window from the
BOUND object and its blits from the STORAGE image, and the two do not coincide
for a texture view: glTextureView gives a view its own BASE_LEVEL/MAX_LEVEL and
layer slice over somebody else's image. Three things followed from the mix-up,
all visible through a two-layer view over a four-layer 2D array:
* EnsureGenerateMipmapStorageAllocated allocated the chain THROUGH the bound
object from that object's OWN base extent, so the storage owner's level was
resized to the view's layer count - the storage behind its other layers was
gone - and the levels outside the view's window were redefined with it.
Immutable storage and views already own every level generation can write,
so neither allocates anything now, and a mutable owner gets only the levels
its window is missing (AllocateStorage RESIZES the level it is handed, so
an existing level keeps the shadow bytes its own upload path wrote).
* The level the chain starts at was the view's, applied to the storage image:
a view whose MIN_LEVEL is 1 generated from the storage's level 1 instead of
its level 2. The window now comes from the frontend's own plan
(MipmapGenerationPlan.h - the same numbers MGPMipPlan::LevelCount publishes)
and is shifted into the storage's numbering before any blit or barrier.
* Every layer of the storage was written instead of the view's window. The
blits carry the view's baseArrayLayer and layerCount now; every layer
outside that window belongs to the storage owner and is left as it was.
The end of the window follows MAX_LEVEL for the same reason the frontend's plan
does: a chain MAX_LEVEL cuts short is no longer generated past it.
The readback had the same shape of bug pointing the other way.
VulkanRenderer::GetTextureImage sized its copy by the storage image's array
layer count while starting it at the caller's layer origin, so a two-layer view
of a four-layer array copied four layers - two outside the window, and the last
one past the end of the image. glGetTexImage carries no destination size, while
the size glGetTextureImage validates is built from the VIEW's own extents, so a
caller that sized its buffer for the view had it overrun by exactly the layers
outside its window. The copy covers the caller's own layers now.
TextureViewScenario.GenerateMipmapThroughAViewLeavesTheOwnerShapeAlone runs on
both backends now. Its DirectVulkan skip named the reallocation above, and the
sub-image readback the skip blamed as well is not broken: a control run of the
same scenario with the generate removed reads every seeded level and layer of a
2D array back, mip 2 and 3 included, through both glGetTexImage and a per-layer
FBO attachment - the two mismatches that control reported are the colours the
generate was supposed to write. GetTexImageThroughAViewReturnsOnlyItsOwnLayers
is new and pins the readback window with canary slices past the view's last
layer; it fails on the reverted readback and passes on DirectGLES too.
EnsureGeneratedMipmapStorageAllocated branched on the transport. The split arm
planned the generation window from BASE_LEVEL/MAX_LEVEL and refused to touch
immutable storage (70c8230b); the monolith arm rebuilt the chain from the bound
object's level-0 extent and then truncated it. Through a view that is
destructive in a way the split arm had already been fixed for: a view's level-0
extent is one slice of the owner's layers, so a two-layer view of a four-layer
array resized every owner level the generation touched to two layers - the
storage behind the owner's other layers was gone - and redefined the owner's
levels out of the view's window as well.
Both arms now take one path. An immutable texture or a view returns before any
allocation: it already owns every level generation can write. A mutable texture
gets levels from the plan's Base..End window and nothing else moves - the chain
is not truncated, because neither MAX_LEVEL nor a generate is a truncation (a
level-0 respecification drops the stale tail itself, in
DiscardMipmapChainOnBaseRespecification). MipmapGenerationPlan.h is no longer
behind MOBILEGL_BUILD_DISAGGREGATED for the same reason: the window is a
property of the GL call, not of how the backend is reached, and the plan the
wire carrier publishes (MGPMipPlan::LevelCount, end-exclusive) is this one.
The window rule was asserted only by the split-only F1WireScenario, whose
fixture skips under every other transport - so the monolith arm, which is what
a non-disaggregated library runs for every application, had no coverage at all.
TextureViewScenario.GenerateMipmapThroughAViewLeavesTheOwnerShapeAlone runs in
an integration-gpu lane under both transports and pins the owner's layer counts,
its own level extents, and the pixels of the levels and layers outside the
view's window. It is DirectGLES-only, and the skip names why: Magma reallocates
the chain through the bound object in its own generate path
(DirectVulkan/Renderer/VulkanRenderer.cpp's EnsureGenerateMipmapStorageAllocated),
and a CPU sub-image into the layers of mip 2 or 3 does not read back through
Magma at all - a run of the same scenario with the generate removed fails
identically - so the per-level colours this case is built on are unobservable on
that backend rather than merely wrong.
DirectVulkan resolved every default-framebuffer role against
m_imageIndexAcquired. Present() advances that to the image it acquires for
the frame that is about to start, and a present record is kWaitPresent - the
client does not wait for the apply - so a readback belonging to the frame
being presented (the retrace snapshot, taken at the swap call) can be applied
after the acquire and then resolve an image nothing had written. That is the
pure-black sundial-lite DirectVulkan retrace frame; DirectGLES is immune
because the driver keeps handing back the buffer the app drew into.
Split the GL-visible index out (VulkanRenderer::m_defaultFramebufferImageIndex)
and keep it out of the present/acquire path: it only re-points at the acquired
image when something WRITES the default framebuffer (DefaultFramebufferWriteIndex,
called at the FBO-0 render-pass creation, the deferred-clear-free direct writes
and the wire draw/clear/blit resolutions) and is reset on RecreateSwapchain.
Reads - glReadPixels both arms, the parked-clear materialization, a blit or copy
SOURCED from FBO 0, ResolveWireImage's read role (carrying the resolved index in
WireImage) - resolve DefaultFramebufferReadIndex instead, i.e. whatever that is.
A readback that resolves a swapchain image with no recorded write now says so
once (MGLOG_W_ONCE, both arms) instead of silently handing back raw pixels.
New integration scenario DirectVulkan|DirectGLES.DefaultFramebufferAcrossSwap
pins both halves: a readback after a swap still sees the drawn frame, and the
first draw after a swap lands in the image the readback then resolves.
Three measured defects in the strict lane, one commit each in spirit and one in fact because
they are the same step.
1. THE LOG SET CAME FROM A DIRECTORY. The CI step grepped MG_IntegrationTest/split-logs/, which
holds 90 of the lane's entries. The ones it could not see were the F1. readback block, both
NamedBlit pairs, the four Ct. entries and PersistentMapArm - precisely the readback population
the allowlist is ABOUT, plus the only DirectVulkan entries in the lane. split_log_paths.py
gains a `markers` mode that walks ctest's own {entry: MOBILEGL_LOG_FILE_PATH} map and
classifies every Fatal{ and Admitted{ line. Measured on this head: 113 of 113 entries read.
The lane is now a TWO-SIDED RATCHET - an unadmitted marker fails, an admitted pair not in
Harness/strict-expected-markers.txt fails, AND an expected pair that no longer appears fails,
so the lane cannot rot green by outliving its own debts.
2. THE `rsp` CHECK GREPPED FOR A COUNTER NO SPLIT ENTRY EMITS, and the pin behind it was vacuous:
CountBarrierPull's unbarriered arm is [[noreturn]] and runs BEFORE ++g_residualPulls, so
"rsp = 0 on unbarriered records" was true of every possible implementation. Replaced by an
assertion where the counter actually is - one entry, DirectGLES.Split.StrictArming., with
MOBILEGL_PIPE_STATS=1, MOBILEGL_PIPE_STATS_PERIOD=1 and a private log path of its own (a
whole-lane env flip races under -j: the library opens that path "w"). It asserts
rsp == 0 || rsp >= draws, which is the device evidence's shape - rsp ~= the draw count under
inproc, 0 under monolith - so the draw path's retirement is visible as rsp ceasing to scale.
3. THE LANE HAD NO POSITIVE CONTROL (ID-115). Of the seven entries that passed strict, three were
monolith transport - where nothing stamps a verb boundary, so the whole mechanism is
structurally unreachable - two self-skipped, one was a death test and one was a Python check.
Not one was a record-carrying split GL scenario, so "green" and "strict was never armed" were
the same observation. New push-only counter `vbs` (PipeStats::ServerVerbBoundaries), counted
at MGPipeServerStampVerbBoundary behind Enabled(), and the same entry asserts vbs > 0 on a
frame that drew. It is deliberately NOT rsp: rsp reaches zero when the phase SUCCEEDS, so a
control built on it would start failing on the day the debt is paid.
- Measured on this head (base 7c6f6886, before pa and mv): isplit 119/119; under strict the
census is Fatal{ GetProgramForDraw@DrawArrays 52, GetBoundVertexArray@DrawArrays 9,
GetProgramForDispatch@DispatchCompute 7 - exactly what pa and mv owe - and Admitted{ on ten
pairs, three of them ADMITTED-ESCALATED. The expected-marker file carries all ten and says in
its header that the wave-3 merge retires three of them.
- CONTRACT-P5E §7 rewritten around what is now checkable: the derived allowlist and its three
disjuncts, the two-sided ratchet, the restated rsp pin, and the positive control.
- FramebufferImpl::SyncAttachmentSurface selects its STORAGE sync by MG_Config::Transport
(ID-81 / CONTRACT-P5E §5.8) instead of routing both arms through tx2's by-handle seam. Under
a transport it is unchanged (SyncMipmapsToBackendByHandle / RBO SyncToBackendByHandle); under
Transport == Monolith it is the frontend sync it was at f6cfcbd3, driven by a monolith-glue
attachment pointer the object-form caller passes and the handle-form caller leaves null.
- The crash this repairs: the push-monolith build drives its framebuffer attachments from the
record (P4a D-C2, gated on FramebufferSubsystemEnabled() alone), so glClear on an FBO holding
a texture reached SyncMipmapsToBackendByHandle, which passes a NULL SharedPtr and relies on a
record arm that `Transport != Monolith` selects. stateTextureObject->IsTextureView() then
dereferenced null - the device SIGSEGV in Lightmap.<init> -> clearColorTexture -> glClear.
- The three texture sync bodies stop treating "a handle was noted" as "the record arm will be
selected": RefuseNullFrontendTextureOffTheHandleArm is one shared check and a null frontend
object on an arm that cannot serve it is Fatal{RoleViolation, "texture-handle-arm"} instead of
a null dereference. It folds to the same constant in the pull build, so no call is added there.
- The renderbuffer arm is arm-selected for the same reason: its by-handle form dereferences
nothing but drops the application-visible GL_OUT_OF_MEMORY RecordError, which the
push-monolith build still has an application to report to.
- New lane entries (MonolithAttachmentClearScenario, three cases: a mutable texture attachment,
an immutable one and a renderbuffer) and a DirectGLES.PushMonolithArm. registration that pins
MOBILEGL_TRANSPORT=monolith and carries the integration-split label, so the gate covers BOTH
runtime arms of the push build instead of only the inproc one (ID-107's coverage hole).
- Gate: build rc=0, unit 2250/2250, integration-split 116/116 (113 + 3), integration-gpu
1294/1294 (137 DirectGLES SEGFAULTs before this commit), gens all rc=0.
- SanityTest's DirectGLESVertexInputDraw pair drives the PRODUCTION decisions
(ResolveDrawVertexBuffersFromRecord / ResolveDrawIndexBufferFromRecord) with the frontend
VAO deliberately pointing at a buffer the record does not name - the state a run-ahead
client makes ordinary and one process cannot otherwise produce. Both functions take the
applier state and nothing else, so the only revert is a frontend read inside them and
the cases then go red naming the field (ID-102's rule about what a red-once may test).
G2/G14 skip twins in the pull arm.
- VertexInputEmit pins ID-95 / ruling 19 on the producer side: set_vertex_buffers' window
must cover every attribute create_vertex_elements declares ENABLED, with a sparse
configuration so "covers the enabled set" is not "is as long as the array". The sink half
is tx2's CheckUnitWindows.
- ClientVertexArrayScenario is BRIEF-P5E's open item (a), answered: NO existing scenario
exercises a client-memory vertex array under split (DoublePrecisionScenario uses the
binding-model calls against real buffers), so the lane had no entry that could reach the
refusal at all. Registered in the split lane with a private log path, and it is also the
positive control for keeping the upload arm alive under lockstep.
- The round-2 report guessed the apply thread's ~48% mutex time was the backend
pendingMutex; the symbolized call graph at 56a77348 says it is the idle poll in
ServerLoop::ApplyThreadMain taking m_controlMutex twice per iteration
(ControlIsPending in the ready lambda, PumpControlRequest), with DrainRing at
29% of the thread. Every package below is cut from that graph, not from self%.
- T (transport): the control mailbox gets an atomic shadow bit m_controlPosted so
the idle poll takes no lock (handshake, C2 critical section and the
NOT_INITIALIZED answer unchanged); Doorbell::Wait spins on a once-calibrated
iteration budget and reads no clock in steady state (the park phase alone
computes deadlines); client/server wait and park counts ride the stats line
as wait[srv= srvpark= cli= clipark=] and the wire ledger as cliwait=/clipark=.
- D (role guards): OnApplyThread() is inline - one relaxed atomic key against the
caller's thread pointer (aarch64 __builtin_thread_pointer, else
std::this_thread::get_id) - and m_applyThreadId, the function-static guard and
the pthread_equal call are gone; the three scope depth counters stop being
thread_local (their only reader is the apply-thread guard, so they count only
when OnApplyThread() is true; a GL-thread scope no longer exempts the apply
thread, pinned by a new case); the guard chains are ordered cheapest-first.
- B (persistent maps): the shadow allocator rounds the SIZE to a page multiple, so
TrackWriteMap aligns OUTWARD when the shadow is page-granular - a sub-page map
is one protected page, edges and their per-draw XXH3 disappear; the inward arm
stays as the fallback. Review found a hole the edge hashes had hidden since
round 1: a map that faulted but was not consumed by the walk that advanced the
epoch was never pushed. The walk now drains every marked member before the
binding walk, registration bumps the epoch so a fresh map ships once on the
draw path, and a non-4 KB kernel page refuses the mprotect arm by name.
- C (client per verb): an image-unit high-water mark (push build only, fed by
glBindImageTexture) replaces the 192-unit sweep per draw; the residual fill's
7-term supplied conjunction is a memo keyed on its four inputs; the server's
63-field stamp per verb is a constexpr per-class mask table.
- generate_mipmap no longer skips its wait under MOBILEGL_IPC_BATCH_WAITS: its sink
is the backend GenerateMipmap, which reads MGB_CTX->GetActiveTextureUnit(), and
a batched publish let the next validate move the serial under it -
Fatal{UnmigratedPipeInput, "GetActiveTextureUnit@ReadPixels"} on the gate tree.
The rule is written at the site: a record may skip its wait only if its apply
reads nothing the residual fill writes. The texture-death scenario gets the
framebuffer case's fence before it reads the object_death tally.
- Redmi 2f7cbe2e, FCL + Minecraft 26.3-rc-3, VD12, CPU pinned: inproc 64.3 fps
(client 15.0 ms/frame, apply 12.4) -> 103-114 fps (client 8.7-9.2 ms/frame on a
mid core, apply 7.0-7.4); monolith 115 (120 Hz vsync-capped runs) / 206 (one
uncapped run, 5.0 ms/frame on the big core). Gates: unit 2203/2203,
integration-split 111/111 (the two formerly flaky cases 6/6 on repeat),
generators, include closure, dirty surface and doc citations green.
VD12 Minecraft on the Redmi (FCL, DirectGLES): the split's in-world frame rate
13 -> 60-66 fps against monolith's 110-114, and persistent-map wire bytes
25 MB/frame -> ~0.23 MB/frame. The residual split-specific costs are named at
the end, not hidden: the R-1 serialization (WaitForApplied ~12%, P11's
versioned-inputs design) and a split-only mutex complex still under
investigation.
Persistent-map push, three arms picked per buffer at map time:
- mprotect dirty tracker: the mapped range's page-aligned interior is
protected PROT_READ; the app's next write faults, the SIGSEGV handler marks
the page in the slot's bitmap and unprotects, and the push ships one 64 KB
block per block containing a faulted page. Ownership is three tests -
SEGV_ACCERR only (a userspace raise and an unmapped page chain verbatim),
inside a live tracked range, and not a refault on a still-set bit (a write
we unprotected succeeds, so that is a non-write access and it crashes
honestly). The alignment is INWARD: an outward-aligned edge page holds
foreign bytes, and a signal-blocking worker thread faulting on one is a
process kill - that was the ctest-only SmallRing segfault. Edge spans
(at most two per map) are hashed per push and ship their containing block
only on change (unconditional edges measured 112 MB/frame). Re-arm is one
mprotect per contiguous run. The first push ships everything once.
- hash-suppress arm (MOBILEGL_IPC_PERSISTENT_HASH_SUPPRESS, default 1):
per-block XXH3 against the last push's hashes; untracked buffers only.
- PushDrawConsumers: only the buffers the upcoming draw/dispatch can read
(VAO attribs/element, indexed binding points, indirect/parameter slots,
TexBuffer backing - the last also retires the per-frame-cadence cloud
twitch), plus the fault-epoch skip: an unmoved epoch proves no interior
byte changed, tracked edges are hashed in place, and any hash-arm member
vetoes. The membership map caches the tracker slot pointer (a 64-slot
rescan per buffer per draw was measured and removed).
MOBILEGL_IPC_BATCH_WAITS (default 1; MOBILEGL_PIPE_VERIFY forces 0): a
value-class record (kCtxState/kCtxCso/kCtxObject with no reply slot) is
published without waiting for its own apply; the barrier is taken at the next
pull-reading verb, the only place BARRIER-PULLED fields are read, so the R-1
fence posts are untouched and only the round trips between them change. Two
consequences are pinned rather than argued: kCtxObject verbs the tests read
synchronously get explicit fences (GenerateMipmapFieldsCross,
FramebufferDeathCrosses), and a frontend object whose last SharedPtr drops on
the apply thread - impossible before batching - now enqueues its
(kind, lifetimeId) on the deferred destroy queue and the GL thread replays
the DestroyAndFree helper at the verb hooks (CopyImageLayeredScenario aborted
Fatal{RoleViolation, MGPipeSlots} without it).
Doorbell::Wait's spin reads the clock once per 64 yields: on the workload
device a steady_clock read is a real syscall (no vDSO) and the per-iteration
reads were ~20% of the whole process at ~1000 waits/frame.
Gates: gen_pipe --check/--self-test green; unit 2188/2188;
integration-split 110/111, the one red being GenerateMipmapDepthPixels whose
DirectGLES and DirectVulkan MONOLITH siblings flake identically with every
code path of this package provably inert (PushIsArmed false, no ClientSession,
deferral's monolith early-out).
The broad inproc census against a same-machine 11ac3de6 baseline found 183 newly-failing;
172 are the design-red the contract rules (the legacy-arm refusal under transport: the
subsystem-off and legacy control lanes, and Magma's P7 surface - every one carries its
Fatal name in ~/p5c-fatal-map.tsv), and the other eleven were three REAL regressions,
fixed here:
1. The surface-changed event drained at the first verb's EmitAndWait, but a pre-verb
glGetFramebufferAttachmentParameteriv on the default framebuffer was answered from the
placeholder attachments, and buffers allocated from that answer are blit-incompatible
with the real surface (DepthStencilReadbackAttachmentShapeScenario). The event ring
gains its SECOND drain-point class: the blocking EGL lifecycle RPC returns
(BackendObject_Remote's surface create/resize and make-current) - the same known-idle
premise as EmitAndWait's post-barrier point. CONTRACT-P5C section 4.1 amended.
2. A whole-buffer writeback larger than the event ring could never fit one record
(capacity/2), aborting the server with Fatal{EventRingOverflow} on the large-arena
readbacks. The client now slices the request at a quarter of the ring (header and
co-posted small events ride along), each slice round-tripping its own barrier + drain;
the whole-buffer flag is cleared by hand after the last slice lands, which is exactly
what WritebackFromBackend's clear says. CONTRACT-P5C section 4.4 amended.
3. ScatterCapturedRecords / ReadbackCapturedRanges read the capture buffers through the
frontend MappedData() (a layer-1 surface since gt) and wrote back by direct call. The
XFB capture path now reads the server's staged shadow (RequireStagedCoverage asserted,
syncedChangeSerial bumped so no later draw overwrites the capture with stale shadow)
and writes back through OnBufferWriteback, the Ops_H_Readback order.
CtWireScenario's two death cases skip on DirectVulkan by name: object_death's producer is
the Espryt-side death-notice ops and Magma installs none until P7.
Evidence: unit 2187/2187; integration-split 111/111; the three families' named cases green
again; census newly-failing reduced to the evidenced design-red set.
Two appended wire records replace the two cross-role control bypasses:
applier_reset (opcode 77, MGPApplierReset{Uint64 ContextSerial}, kScreen) is emitted by
the GL thread at the FreshlyPrimed make-current edge, before the client-side resets, so
the record's barrier orders the server's MGPipeApplierReset against every verb that
follows; a direct MGPipeApplierReset() from a non-apply thread with a live session is
Fatal{RoleViolation, "g_applier"} (MGPipeApply.cpp carries the layer-2 guard; the
apply-thread and no-session bring-up shapes keep the direct call verbatim).
object_death (opcode 78, reuses MGPipeHandleOnly, kCtxObject) is the framebuffer
family's first wire delete opcode: the client thread resolves the dying object's handle
in its OWN allocator, emits nothing for a handle the server never saw, and EmitAndWaits
otherwise - the wait preserving the death's ordering against in-flight records that
name the handle, the only property the blocking mailbox hop provided. The sink releases
per-kind twins through a handle-keyed ReleaseTwinByHandle (seven kinds, SamplerViewCso's
idempotent second path kept); a null arriving handle is
Fatal{ProtocolCorruption, "ObjectDeath.Handle"}. A documented NoSession fallback arm
delivers a death to a server-only fixture's loop; monolith keeps the mailbox hop and
the FreshlyPrimed direct call character for character.
Evidence: gen_pipe --check/--self-test and gen_pipe_field_ownership --check/--self-test
green; unit 2155/2155; integration-split 111/111 (107 plus four new CtWireScenario
entries, all genuinely run, each with its own log path and an EXPECT_EXIT death case);
red-once - shorting the emission to the direct call turns the four Ct cases red with
Fatal{RoleViolation, "g_applier"} by name, then restores green verbatim.
CONTRACT-P5C sections 1, 5.1-5.2, 7.