Files
MobileGL/docs/Disaggregated/notes/p8/README.md
T
swung0x48 43b5cfa94e [Docs] (Disaggregated): the four index documents keep only summaries, and every phase's detail lives in its own notes/<phase>/README.md
- ROADMAP, MEASUREMENTS and ARCHITECTURE are rewritten as summaries (333 KB of index text -> 84 KB).
  ROADMAP's phase table is one line per phase plus a link; MEASUREMENTS keeps headline numbers under
  its old §1-§13 numbering (plus §14-§16 for P6.5, P7 and P12); ARCHITECTURE keeps every decided rule
  under the same §1-§17 / appendix numbering, so the `ARCHITECTURE.md §N` references in code still
  land, and §17 becomes an index of the phase landing shapes.
- CURRENT_STAGE_PROGRESS now describes the current stage (the P12 on-screen-server subset) and absorbs
  CURRENT_STAGE_STATUS, which is removed. The P7 status tables, the P6 closing snapshot and the P6.5
  first-wave snapshot move to notes/p7, notes/p6 and notes/p65.
- Each phase gets notes/<phase>/README.md: a short summary, then the verbatim material that left
  the index documents (its ROADMAP row, its MEASUREMENTS section with subsection numbers kept, its
  ARCHITECTURE §17 part, milestones) and a file index. P8-P11 and P13 get their planned scope;
  the full open-question list moves to notes/OPEN-QUESTIONS.md.
- The phase reports that sat at the top level move into their phase folders with unchanged names:
  P5D-INPROC-PERFORMANCE, P5E-RUNAHEAD, P5F-WIRE-COMPLETENESS, P6-SPAWN-PLAN, P6-CONTRACT-DRAFT,
  P6-ENDSTATE-REVIEW. Their relative links, CONTRACT-P6.md's links to them and one tool docstring
  are updated; notes/README.md maps every old path and section number to its new place.
- 71 files under notes/recovered/ that were byte-identical copies of phase-folder files are removed.
- Corrections made while condensing: the server process reads Transport as Spawn (CONTRACT-P6 §3.1
  amended the old "child forces monolith" rule); both backends now publish kCapRunAheadApply;
  MOBILEGL_IPC_RESPAWN is a named refusal and MOBILEGL_IPC_IDLE_EXIT_S is not parsed; the Redmi
  pin row is in tools/device_bench/pin_device.sh.

check_doc_citations over docs/Disaggregated/*.md: 0 problems. No relative link is newly broken.
2026-09-24 22:21:09 +00:00

16 lines
2.2 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# P8 — emulation 下放 + 索引宿主镜像 + 协议广度(待排)
> 尚未开工。本页保存该阶段在路线图上的完整范围与出口门(2026-09-24 从 [`ROADMAP.md`](../../ROADMAP.md) 阶段表移入,原文照录);阶段开工后,计划、裁定与报告都放在本目录。
## 摘要
- monolith 跑道,P7 之后。把读前端字节的纯 CPU 变换下放到 client(`MG_Impl/Pipe/HostResolve.cpp`:最大索引扫描、`*IndirectCount` 解析);`Server/IndexHostMirror` **待重裁**(a6 实测宿主索引 span 无 producer);multi-draw client indices、CopyImage 镜像、`generate_mipmap` CPU 回退、`texture-remint-pull` 仿真下放;大 blob carrier 只剩 program archive 与 `draw_vbo` range 尾(与 P6.5 sl 共用分片)。
- 门:`DirectGLES.Split.*` 与 `DirectGLES.*` 逐名相同;trace split 双后端 SSIM ≥ 0.99;`create-indirect` 上 roundtrips-per-frame 读零。
## 阶段表行(原 `ROADMAP.md`)
- **阶段**:**P8** emulation 下放 + 索引宿主镜像 + 协议广度
- **状态**:待排
- **落地什么 / 范围**:`MG_Impl/Pipe/HostResolve.cpp`(~~client 数组范围~~ 已由 `beba0256` 落地为 owned buffer;最大索引扫描、`*IndirectCount` 解析,逐站点 reconcile);`Server/IndexHostMirror` **待重裁**(树里 0 处;a6 §6 实测宿主索引 span 无 producer、client 索引已是 owned buffer——按 `kCapNeedsHostIndexBytes` 的真实消费者重新裁定,不照抄 `ARCHITECTURE.md` §10.3);multi-draw client indices(`MultiDrawElements+CLIENT_INDICES` 仍具名拒绝);CopyImage 镜像搬到 client;viewport-array 回放验证;`generate_mipmap` 计划 + CPU 回退纹素;`texture-remint-pull` 仿真下放(15 处具名拒绝);大 blob carrier 只剩 **program archive 与 `draw_vbo` range 尾**(a6 §6;与 P6.5 sl 共用同一分片);`kCapDriverOrderedXfbCapture`(0 处);~~无 present fence tick~~ 只记在 P10
- **验收门 / 证据**:`'^DirectGLES\.Split\.'` 与 `'^DirectGLES\.'` 逐名相同;trace split 双后端 SSIM ≥ 0.99 含两个 `coherent_as_flush` fixture;`ClientArrayAfterComputeWriteScenario`;`create-indirect` 上 `roundtrips-per-frame` 读零;`index-mirror-bytes` 逐用例发布