- set_vertex_attrib_defaults hard-coded MGPAttribValue::ValueClass to 0 for every attribute and always sent the FLOAT view's four words. A CurrentVertexAttributeValue is one value in three views and GLContext converts numerically between them, so those bytes cannot reproduce the frontend value: glVertexAttrib4f(loc, 1.5f, ..) leaves 1 in intValue and 0x3FC00000 in floatValue, and every glVertexAttribI4i/ui default was wrong too - GLContext now records which view each glVertexAttrib* write filled directly (GetCurrentVertexAttributeClass, push-only) and the payload carries that class and THAT class's own words. It is kept beside the value rather than inside it because CurrentVertexAttributeValue is mirrored into PipeInputs and compared there by a memcmp whose size assertion lives in a file this package does not own - MGPipeFillAttribValue is the flattening, in one named place, so TrackerAttribPayload can pin it: the old defect turns three of its four cases red - the applier (package A's) still memcpys the four words into all three views regardless of ValueClass, so the emitter now CHECKS: it compares the mirror the applier wrote against the frontend's value and, when they differ, copies the field itself and says so once. That closes the window the old code left wrong - a glVertexAttrib* write followed by a verb whose class does not read the field, where the residual fill does not run for it - and it stops repairing by itself the day A's applier honours the class - MGPipeVertexAttribDefaultRepairCount() makes that repair observable to a test without reading storage the fill table forbids that verb to read - the emission gate now goes through MGPipeSubsystemForDirty, the one bit-to-subsystem map, instead of a second copy of it written out by hand at the validate point; five static_asserts tie that map to the field-emitter map it has to agree with - the staging mirror is advanced only by the branch that sent dynamic bytes, with the invariant it used to rely on (BumpVersions moves both counters, RenderState.h) asserted here rather than assumed of another package's file - TrackerShippedEmitter drives MGPipeValidateForVerb itself and reads the real singletons back, so the blend-toggle and viewport shapes are pinned on the shipped emitter and not only on the unit tests' local re-implementation; the fixtures reset the applier, the cache and the tracker together, which is the only consistent state of the three - comments: the derivation probe is a one-field sample, the residual block's trip wire is half a tautology until package A's c1 lands, and the widened counter cannot see a change of exactly 65536 - all three recorded where the code is, not only in a review
MobileGL
A desktop OpenGL implementation
MobileGL is a free and open-source project that implements a desktop OpenGL API. The goal is to provide a complete desktop OpenGL implementation with a state management layer and multi-backend support.
Note
Status: In development. Parts of the codebase are incomplete. Current short-term target: OpenGL 4.2 (Core Profile).
Project positioning
MobileGL is an implementation of a desktop OpenGL library. It aims to provide:
- Full OpenGL state management.
- A front-end that exposes OpenGL functions.
- Multiple independent backend implementations, where each backend targets a specific graphics API and remains fully isolated from others.
This project is intended as an implementation/translation layer.
Key components
The repository is organized into following top-level modules:
- MG_State — state tracking and management logic for Graphics APIs.
- MG_Impl — front-end implementations of Graphics APIs that interact with
MG_StateandMG_Backend. - MG_Backend — per-backend translation layer that maps front-end Graphics APIs' semantics and state into concrete backend API calls (e.g. OpenGL ES, Vulkan).
- MG_Util and other utility modules.
Third-party components
MobileGL reuses several open-source projects:
- SPIRV-Cross by KhronosGroup - Apache License 2.0: github
- glslang by KhronosGroup - Various Licenses: github
- DiligentCore by Diligent Graphics - Apache License 2.0: github
- flat_hash_map by Malte Skarupke - Boost Software License 1.0: github
Refer to each component's repository for exact license texts. Any bundled third-party code in this repository is included under the upstream project's license.
Compatibility & target
- Short-term target:
OpenGL 4.2 (Core Profile). - Current development focus:
- Performance improvement
MG_StateandMG_ImplforOpenGL 4.2 (Core Profile)Direct (Vulkan)backendDirect (OpenGL ES)backend
Build Instructions
We currently provide no releases and no precompiled binaries.
If you want to try the project right now, you’ll need to build it yourself:
-
Clone the repository:
git clone https://github.com/MobileGL-Dev/MobileGL.git -
Initialize and update all submodules recursively:
git submodule update --init --recursive -
Follow glslang’s own documentation for its required initiation.
-
Configure and build the project with CMake:
cmake -B build cmake --build buildor do it in a modern way:
cmake -S . -B build -G Ninja -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ cmake --build buildAlternatively, you can use platform-specific build commands as needed.
Build For macOS
On macOS, MobileGL can be built as a dylib that exposes the normal OpenGL/CGL/NSOpenGL entry points and routes them to the DirectVulkan backend. This is useful for running applications such as Minecraft through their stock GLFW/LWJGL OpenGL path while MobileGL is injected before context creation.
Prerequisites:
- macOS with Clang and Ninja.
- Vulkan loader and MoltenVK installed. With Homebrew, the MoltenVK ICD is commonly located at
/opt/homebrew/etc/vulkan/icd.d/MoltenVK_icd.json.
Configure and build:
cmake -S . -B build-macos-magma \
-G Ninja \
-DCMAKE_BUILD_TYPE=Release \
-DMOBILEGL_BACKEND_TYPE=DirectVulkan \
-DMOBILEGL_BUILD_TEST=OFF \
-DMOBILEGL_BUILD_BENCHMARK=OFF
cmake --build build-macos-magma --target MobileGL -j8
The dylib will be generated at:
build-macos-magma/libMobileGL.dylib
To run Minecraft by MobileGL from a launcher like PrismLauncher, keep the stock LWJGL/GLFW natives and add a wrapper command to the instance settings:
env DYLD_INSERT_LIBRARIES=/absolute/path/to/MobileGL/build-macos-magma/libMobileGL.dylib MOBILEGL_BACKEND_TYPE=DirectVulkan VK_ICD_FILENAMES=/opt/homebrew/etc/vulkan/icd.d/MoltenVK_icd.json
Also make sure the JVM arguments include:
-XstartOnFirstThread
DYLD_INSERT_LIBRARIES must be active before GLFW creates its OpenGL context. After startup, the Minecraft F3 screen should report MobileGL and the Direct (Vulkan) backend if the injection worked.
Build Options
| Option | Description | Default |
|---|---|---|
MOBILEGL_BUILD_TEST |
Build MobileGL tests (requires Clang) | ON |
MOBILEGL_BUILD_BENCHMARK |
Build MobileGL benchmarks (requires Clang) | ON |
MOBILEGL_FORCE_RELEASE_OPT |
Enable O3 and LTO in Debug build | ON |
MOBILEGL_ENABLE_TRACY |
Enable Tracy profiler for performance analysis | OFF |
Notes:
- The project requires C++23.
MG_TestandMG_Benchmarkcan only be built with Clang, not GCC. To enforce Clang, add-DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++to your command.- On Android, tests and benchmarks are always disabled.
Environment Variables
MobileGL supports runtime configuration via environment variables.
Supported Keys
| Variable | Description | Allowed Values | Default |
|---|---|---|---|
MOBILEGL_BACKEND_TYPE |
Select active backend implementation at startup. | DirectGLES, DirectVulkan |
DirectGLES |
MOBILEGL_DISABLE_TIMERQUERY |
Disable GPU timer-query exposure and use. | 0, 1 |
0 |
MOBILEGL_ESPRYT_USE_ANGLE |
Load ANGLE EGL/GLES libraries. | 0, 1 |
0 |
MOBILEGL_MAGMA_DISABLE_SUBGROUP |
Disable Vulkan shader subgroup support. | 0, 1 |
0 |
MOBILEGL_ADVERTISE_FP64 |
Advertise GL_ARB_gpu_shader_fp64. GLSL double/dvec/dmat compile and run either way - they are narrowed to 32 bits - so this only changes whether an application is told it has 64-bit precision, which it does not. |
0, 1 |
0 |
MOBILEGL_MAGMA_R11G11B10F_FALLBACK |
Use Magma's R11G11B10F format fallback. | 0, 1 |
0 |
MOBILEGL_MAGMA_FRAMESINFLIGHT |
Set Magma frames in flight. | Integer 1–64 |
3 |
MOBILEGL_ESPRYT_AVOID_SAMPLER_MIPMAP_MIN_FILTER |
Avoid sampler mipmap minification filters. | 0, 1 |
0 |
MOBILEGL_COHERENT_AS_FLUSH |
Treat persistent GL_MAP_FLUSH_EXPLICIT_BIT maps as coherent (app-compat for engines like Flywheel that never flush them). |
0, 1 |
0 |
MOBILEGL_ESPRYT_FORCE_DS_READBACK_EMULATION |
Always emulate depth/stencil glReadPixels/glGetTexImage by shader sampling on Espryt, instead of using the driver's own depth/stencil readback where it has one. |
0, 1 |
0 |
VK_ICD_FILENAMES |
Select the Vulkan ICD used by the Vulkan loader. | Path to an ICD JSON file | Loader default |
License
This project is distributed under GNU LGPL v3.0. See the LICENSE file in the repository for detailed information.