Files
MobileGL/docs/Disaggregated/notes/p7/device-window-1/F1-verify/README.md
T
swung0x48 8a445a3098 [docs] (P7): every cited feat/disaggregated commit is the rewritten one without the attribution trailer
- 144 commits from 785fed0b0 onward were rewritten to drop the Co-Authored-By trailer the
  project forbids; origin/feat/disaggregated moved from 1135c664 to 3c80cd62 (same trees)
- the old->new map is ~/w7/logs/sha-map-20260922.txt; every 7..40-hex citation in the
  Disaggregated docs and the MG_Remote contracts that matched an old SHA is replaced by the
  same-length prefix of its rewrite; no other content changes
2026-09-22 20:51:15 -04:00

37 lines
2.6 KiB
Markdown
Executable File
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# F1 复验 + E7/E8 · OpenRA 的分歧是「冷驱动缓存」下的时序竞态
APK `p7w3-3179c497`(wave 0 + X1 + F1;`../00-session/`),Redmi `2f7cbe2e`,DirectVulkan × `--use-pbuffer` × inproc。每次回放都是**新进程**(logcat pid 11917 → 12156 → 12478),所以「热」不在进程里,在 Adreno 驱动的磁盘 shader / pipeline 缓存里。
## F1 本身:生效,但不是分歧的原因
六次运行 `does not consume MGPipe subsystem` 行 **0 条**(修前每次 1 条)——F1 的机制修正在真机上成立。SSIM 却没有随之固定:
| 臂 | repeat-01 | repeat-02 | repeat-03 |
|---|---|---|---|
| inproc,run-ahead ARMED(`F1-ra1.log`) | **0.976493989**(14658 px) | **1.000000** | **1.000000** |
| inproc,lockstep `RUN_AHEAD=0`(`F1-ra0.log`) | 0.995787641(5321 px) | 0.988997893(9836 px) | 0.988997893 |
## E7:每次 `pm clear` 后再跑(冷驱动缓存)
| 运行 | SSIM | mismatch |
|---|---|---|
| E7-cold-ra1-1 | 0.976493989 | 14658 |
| E7-cold-ra1-2 | 0.976493989 | 14658 |
| E7-cold-ra1-3 | 0.976493989 | 14658 |
| E7-cold-monolith(同 APK,`--transport monolith`,同样 `pm clear`) | **1.000000** | 0 |
冷缓存下**三遍逐字相同**——给定「冷」,分歧是确定的;热了就 1.0。monolith 冷热都 1.0。
## E8:冷缓存 + `MOBILEGL_MAGMA_FRAMESINFLIGHT=1`
1.000000 / 0.976493989(两遍一绿一红)——竞态窗口变窄,没关上。
## 判读
- 历史两个观测值 0.976494 / 0.988998 = OpenRA 在 ARMED / lockstep 下的**冷缓存**读数(当时每次都是新装 APK 后的首跑)。
- 原因不在 run-ahead、不在 caps(F1 已关)、不在 client:两臂 client / server 日志逐行相同(505 行 server、12 条 pipeline 行、3 条既有 ERROR),无 Fatal 无拒绝。
- diff 图只缺帧内**最后画的**那些 sprite / 建筑(左上约 40%),背景全对 → wire 臂上的最终帧回读在 GPU 没画完最后几批(冷缓存下 pipeline 创建很慢)时就采样了;monolith 臂的回读路径同步正确。树上已有一条相关警告:`DirectVulkan::ReadPixels: no write is recorded for swapchain image N ... the readback returns its raw pixels`。
- → 交 wave 2 **B**(`WireFramebuffer.inc` / `VulkanRenderer.cpp` 的回读 / present / frames-in-flight 同步)作为第 0 片:主机 red-once = 用 `vkCreateGraphicsPipelines` 延迟旋钮复现,修后带旋钮仍 1.0;真机复验 = 三次 `pm clear` 冷跑全 1.0。
原始归档 `.trace-work/p7w3/{F1-openra-ra1,F1-openra-ra0,E7-cold-*,E8-cold-*}`(不入库);本目录 `F1-ra1.log`、`F1-ra0.log`、`*-summary.json` 与 `../E7-coldcache/*.log`。