swung0x48
5c777b49e8
- The resolved multi-draw tier is ONE process-wide read of MOBILEGL_ESPRYT_MULTIDRAW_MODE (MultiDraw.cpp's ResolveTierOnce) and the d1 block leaves it at "auto", which on this driver lands on "ext" - the one tier that asks the bound index buffer nothing. Three of the five sites the previous commit migrated therefore had no entry in the set the gate runs: ID-107's shape one level down, with the env knob in place of MG_Config::Transport. - Five blocks, one per tier "auto" cannot reach (basevertex, multiindirect, indirect, drawelements, compute), prefix DirectGLES.Split.MultiDrawTier<Tier>., both labels, and MOBILEGL_ESPRYT_MULTIDRAW_MODE pinned as a ctest ENVIRONMENT property rather than a job-level export - review finding N-6's reason, and the PushMonolithArm block's precedent. - "ext" is deliberately NOT registered: the d1 block already IS the ext lane. Every other tier was confirmed to resolve to ITSELF here rather than falling back to ext, so no entry in this set is a green that silently means "ext again". - The filter is the tier-sensitive workload: MultiDrawScenario (minus the client-indices case d1 already excludes by name) plus IndexedDrawFamilyScenario's three MultiDraw cases. 12 entries per tier, 60 in total. - SplitLogPaths.cmake.in gives each of them a private log path. That is the rule every DirectGLES.Split. entry follows (SplitLogPaths.PrivateAndDistinct), and for these it also repairs the census blind spot: a third name segment means strict_census2.sh would re-run them without the very pin under test, so the marker is read where the lane wrote it. - integration-split 116 -> 176, integration-gpu 1294 -> 1354, both fully green. Under the strict lane all 60 stop on GetProgramForDraw@DrawArrays, which is pa's row: PrepareForDraw runs before the tier dispatch, so no new marker class appears and mv's row stays at 0.
MobileGL
A desktop OpenGL implementation
MobileGL is a free and open-source project that implements a desktop OpenGL API. The goal is to provide a complete desktop OpenGL implementation with a state management layer and multi-backend support.
Note
Status: In development. Parts of the codebase are incomplete. Current short-term target: OpenGL 4.2 (Core Profile).
Project positioning
MobileGL is an implementation of a desktop OpenGL library. It aims to provide:
- Full OpenGL state management.
- A front-end that exposes OpenGL functions.
- Multiple independent backend implementations, where each backend targets a specific graphics API and remains fully isolated from others.
This project is intended as an implementation/translation layer.
Key components
The repository is organized into following top-level modules:
- MG_State — state tracking and management logic for Graphics APIs.
- MG_Impl — front-end implementations of Graphics APIs that interact with
MG_StateandMG_Backend. - MG_Backend — per-backend translation layer that maps front-end Graphics APIs' semantics and state into concrete backend API calls (e.g. OpenGL ES, Vulkan).
- MG_Util and other utility modules.
Third-party components
MobileGL reuses several open-source projects:
- SPIRV-Cross by KhronosGroup - Apache License 2.0: github
- glslang by KhronosGroup - Various Licenses: github
- DiligentCore by Diligent Graphics - Apache License 2.0: github
- flat_hash_map by Malte Skarupke - Boost Software License 1.0: github
Refer to each component's repository for exact license texts. Any bundled third-party code in this repository is included under the upstream project's license.
Compatibility & target
- Short-term target:
OpenGL 4.2 (Core Profile). - Current development focus:
- Performance improvement
MG_StateandMG_ImplforOpenGL 4.2 (Core Profile)Direct (Vulkan)backendDirect (OpenGL ES)backend
Build Instructions
We currently provide no releases and no precompiled binaries.
If you want to try the project right now, you’ll need to build it yourself:
-
Clone the repository:
git clone https://github.com/MobileGL-Dev/MobileGL.git -
Initialize and update all submodules recursively:
git submodule update --init --recursive -
Follow glslang’s own documentation for its required initiation.
-
Configure and build the project with CMake:
cmake -B build cmake --build buildor do it in a modern way:
cmake -S . -B build -G Ninja -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ cmake --build buildAlternatively, you can use platform-specific build commands as needed.
Build For macOS
On macOS, MobileGL can be built as a dylib that exposes the normal OpenGL/CGL/NSOpenGL entry points and routes them to the DirectVulkan backend. This is useful for running applications such as Minecraft through their stock GLFW/LWJGL OpenGL path while MobileGL is injected before context creation.
Prerequisites:
- macOS with Clang and Ninja.
- Vulkan loader and MoltenVK installed. With Homebrew, the MoltenVK ICD is commonly located at
/opt/homebrew/etc/vulkan/icd.d/MoltenVK_icd.json.
Configure and build:
cmake -S . -B build-macos-magma \
-G Ninja \
-DCMAKE_BUILD_TYPE=Release \
-DMOBILEGL_BACKEND_TYPE=DirectVulkan \
-DMOBILEGL_BUILD_TEST=OFF \
-DMOBILEGL_BUILD_BENCHMARK=OFF
cmake --build build-macos-magma --target MobileGL -j8
The dylib will be generated at:
build-macos-magma/libMobileGL.dylib
To run Minecraft by MobileGL from a launcher like PrismLauncher, keep the stock LWJGL/GLFW natives and add a wrapper command to the instance settings:
env DYLD_INSERT_LIBRARIES=/absolute/path/to/MobileGL/build-macos-magma/libMobileGL.dylib MOBILEGL_BACKEND_TYPE=DirectVulkan VK_ICD_FILENAMES=/opt/homebrew/etc/vulkan/icd.d/MoltenVK_icd.json
Also make sure the JVM arguments include:
-XstartOnFirstThread
DYLD_INSERT_LIBRARIES must be active before GLFW creates its OpenGL context. After startup, the Minecraft F3 screen should report MobileGL and the Direct (Vulkan) backend if the injection worked.
Build Options
| Option | Description | Default |
|---|---|---|
MOBILEGL_BUILD_TEST |
Build MobileGL tests (requires Clang) | ON |
MOBILEGL_BUILD_BENCHMARK |
Build MobileGL benchmarks (requires Clang) | ON |
MOBILEGL_FORCE_RELEASE_OPT |
Enable O3 and LTO in Debug build | ON |
MOBILEGL_ENABLE_TRACY |
Enable Tracy profiler for performance analysis | OFF |
Notes:
- The project requires C++23.
MG_TestandMG_Benchmarkcan only be built with Clang, not GCC. To enforce Clang, add-DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++to your command.- On Android, tests and benchmarks are always disabled.
Environment Variables
MobileGL supports runtime configuration via environment variables.
Supported Keys
| Variable | Description | Allowed Values | Default |
|---|---|---|---|
MOBILEGL_BACKEND_TYPE |
Select active backend implementation at startup. | DirectGLES, DirectVulkan |
DirectGLES |
MOBILEGL_DISABLE_TIMERQUERY |
Disable GPU timer-query exposure and use. | 0, 1 |
0 |
MOBILEGL_ESPRYT_USE_ANGLE |
Load ANGLE EGL/GLES libraries. | 0, 1 |
0 |
MOBILEGL_MAGMA_DISABLE_SUBGROUP |
Disable Vulkan shader subgroup support. | 0, 1 |
0 |
MOBILEGL_ADVERTISE_FP64 |
Advertise GL_ARB_gpu_shader_fp64. GLSL double/dvec/dmat compile and run either way - they are narrowed to 32 bits - so this only changes whether an application is told it has 64-bit precision, which it does not. |
0, 1 |
0 |
MOBILEGL_MAGMA_R11G11B10F_FALLBACK |
Use Magma's R11G11B10F format fallback. | 0, 1 |
0 |
MOBILEGL_MAGMA_FRAMESINFLIGHT |
Set Magma frames in flight. | Integer 1–64 |
3 |
MOBILEGL_ESPRYT_AVOID_SAMPLER_MIPMAP_MIN_FILTER |
Avoid sampler mipmap minification filters. | 0, 1 |
0 |
MOBILEGL_COHERENT_AS_FLUSH |
Treat persistent GL_MAP_FLUSH_EXPLICIT_BIT maps as coherent (app-compat for engines like Flywheel that never flush them). |
0, 1 |
0 |
MOBILEGL_ESPRYT_FORCE_DS_READBACK_EMULATION |
Always emulate depth/stencil glReadPixels/glGetTexImage by shader sampling on Espryt, instead of using the driver's own depth/stencil readback where it has one. |
0, 1 |
0 |
VK_ICD_FILENAMES |
Select the Vulkan ICD used by the Vulkan loader. | Path to an ICD JSON file | Loader default |
License
This project is distributed under GNU LGPL v3.0. See the LICENSE file in the repository for detailed information.