BZLZHH
d96acb7972
glClearBufferData and friends accepted exactly two argument triples - R8UI with UNSIGNED_BYTE and R32UI with UNSIGNED_INT, both through RED_INTEGER - and raised INVALID_ENUM for everything else. That is most of the entry point missing rather than a narrow gap: GL takes any of the sized formats in the buffer-texture table, which is what an application clearing an RGBA8 or R32F buffer uses. The wrong error also hid the checks behind it. A test clearing a mapped buffer, or one passing a misaligned offset, never reached those rules because the format tuple was rejected first, so INVALID_ENUM came back where INVALID_OPERATION or INVALID_VALUE was due - the validation was there and correct all along, just unreachable. internalformat now goes through the same table the buffer textures use (shared rather than written out twice, since it is the same list for the same reason), and format and type through the ordinary pixel format converters. The element size comes from the internal format, which is what offset and size have to be multiples of. Note that a bad format or type here is INVALID_VALUE, not INVALID_ENUM (GL 4.6 core 6.3) - the odd one out among the enum arguments, and what the conformance tests check for. The pattern is still replicated verbatim, which is correct while the client layout matches the internal format - every real caller, and every conformance case. When they differ it now says so instead of quietly writing a differently-sized pattern. direct_state_access.buffers_clear and buffers_functional pass on both backends; buffers_errors is down to one unrelated complaint about glMapNamedBufferRange.
MobileGL
A desktop OpenGL implementation
MobileGL is a free and open-source project that implements a desktop OpenGL API. The goal is to provide a complete desktop OpenGL implementation with a state management layer and multi-backend support.
Note
Status: In development. Parts of the codebase are incomplete. Current short-term target: OpenGL 3.3 (Core Profile).
Project positioning
MobileGL is an implementation of a desktop OpenGL library. It aims to provide:
- Full OpenGL state management.
- A front-end that exposes OpenGL functions.
- Multiple independent backend implementations, where each backend targets a specific graphics API and remains fully isolated from others.
This project is intended as an implementation/translation layer.
Key components
The repository is organized into following top-level modules:
- MG_State — state tracking and management logic for Graphics APIs.
- MG_Impl — front-end implementations of Graphics APIs that interact with
MG_StateandMG_Backend. - MG_Backend — per-backend translation layer that maps front-end Graphics APIs' semantics and state into concrete backend API calls (e.g. OpenGL ES, Vulkan).
- MG_Util and other utility modules.
Third-party components
MobileGL reuses several open-source projects:
- SPIRV-Cross by KhronosGroup - Apache License 2.0: github
- glslang by KhronosGroup - Various Licenses: github
- DiligentCore by Diligent Graphics - Apache License 2.0: github
Refer to each component's repository for exact license texts. Any bundled third-party code in this repository is included under the upstream project's license.
Compatibility & target
- Short-term target:
OpenGL 3.3 (Core Profile). - Current development focus:
MG_StateandMG_ImplforOpenGL 3.3 (Core Profile)Direct (Vulkan)backendDirect (OpenGL ES)backend
Build Instructions
We currently provide no releases and no precompiled binaries.
If you want to try the project right now, you’ll need to build it yourself:
-
Clone the repository:
git clone https://github.com/MobileGL-Dev/MobileGL.git -
Initialize and update all submodules recursively:
git submodule update --init --recursive -
Follow glslang’s own documentation for its required initiation.
-
Configure and build the project with CMake:
cmake -B build cmake --build buildor do it in a modern way:
cmake -S . -B build -G Ninja -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ cmake --build buildAlternatively, you can use platform-specific build commands as needed.
Build For macOS
On macOS, MobileGL can be built as a dylib that exposes the normal OpenGL/CGL/NSOpenGL entry points and routes them to the DirectVulkan backend. This is useful for running applications such as Minecraft through their stock GLFW/LWJGL OpenGL path while MobileGL is injected before context creation.
Prerequisites:
- macOS with Clang and Ninja.
- Vulkan loader and MoltenVK installed. With Homebrew, the MoltenVK ICD is commonly located at
/opt/homebrew/etc/vulkan/icd.d/MoltenVK_icd.json.
Configure and build:
cmake -S . -B build-macos-magma \
-G Ninja \
-DCMAKE_BUILD_TYPE=Release \
-DMOBILEGL_BACKEND_TYPE=DirectVulkan \
-DMOBILEGL_BUILD_TEST=OFF \
-DMOBILEGL_BUILD_BENCHMARK=OFF
cmake --build build-macos-magma --target MobileGL -j8
The dylib will be generated at:
build-macos-magma/libMobileGL.dylib
To run Minecraft by MobileGL from a launcher like PrismLauncher, keep the stock LWJGL/GLFW natives and add a wrapper command to the instance settings:
env DYLD_INSERT_LIBRARIES=/absolute/path/to/MobileGL/build-macos-magma/libMobileGL.dylib MOBILEGL_BACKEND_TYPE=DirectVulkan VK_ICD_FILENAMES=/opt/homebrew/etc/vulkan/icd.d/MoltenVK_icd.json
Also make sure the JVM arguments include:
-XstartOnFirstThread
DYLD_INSERT_LIBRARIES must be active before GLFW creates its OpenGL context. After startup, the Minecraft F3 screen should report MobileGL and the Direct (Vulkan) backend if the injection worked.
Build Options
| Option | Description | Default |
|---|---|---|
MOBILEGL_BUILD_TEST |
Build MobileGL tests (requires Clang) | ON |
MOBILEGL_BUILD_BENCHMARK |
Build MobileGL benchmarks (requires Clang) | ON |
MOBILEGL_FORCE_RELEASE_OPT |
Enable O3 and LTO in Debug build | ON |
MOBILEGL_ENABLE_TRACY |
Enable Tracy profiler for performance analysis | OFF |
Notes:
- The project requires C++23.
MG_TestandMG_Benchmarkcan only be built with Clang, not GCC. To enforce Clang, add-DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++to your command.- On Android, tests and benchmarks are always disabled.
Environment Variables
MobileGL supports runtime configuration via environment variables.
Supported Keys
| Variable | Description | Allowed Values | Default |
|---|---|---|---|
MOBILEGL_BACKEND_TYPE |
Select active backend implementation at startup. | DirectGLES, DirectVulkan |
DirectGLES |
MOBILEGL_DISABLE_TIMERQUERY |
Disable GPU timer-query exposure and use. | 0, 1 |
0 |
MOBILEGL_USE_ANGLE |
Load ANGLE EGL/GLES libraries. | 0, 1 |
0 |
MOBILEGL_DISABLE_SUBGROUP |
Disable Vulkan shader subgroup support. | 0, 1 |
0 |
MOBILEGL_MAGMA_R11G11B10F_FALLBACK |
Use Magma's R11G11B10F format fallback. | 0, 1 |
0 |
MOBILEGL_MAGMA_FRAMESINFLIGHT |
Set Magma frames in flight. | Integer 1–64 |
3 |
MOBILEGL_AVOID_SAMPLER_MIPMAP_MIN_FILTER |
Avoid sampler mipmap minification filters. | 0, 1 |
0 |
MOBILEGL_COHERENT_AS_FLUSH |
Treat persistent GL_MAP_FLUSH_EXPLICIT_BIT maps as coherent (app-compat for engines like Flywheel that never flush them). |
0, 1 |
0 |
VK_ICD_FILENAMES |
Select the Vulkan ICD used by the Vulkan loader. | Path to an ICD JSON file | Loader default |
Notice
- MobileGL is not production-ready currently.
- Some
OpenGL 3.3 (Core Profile)features are still missing or under development.
License
This project is distributed under GNU LGPL v3.0. See the LICENSE file in the repository for detailed information.