wave 0 item 5. Three instruments P7's device window needs, and the CI steps that
can make each of them red.
run_tcp_matrix.py --backend DirectVulkan end to end. --backend already existed and
already filtered by each case's ci_backends; what did not exist is a per-backend
GOLDEN. The two backends shared `golden` plus an optional `alternate_golden`, and
alternate_golden is an OR across backends, not a per-backend key - so a
DirectVulkan run that matched the DirectGLES picture passed, which is the "went
green on the wrong arm" shape the exit gate exists to catch. trace_cases.json
gains `backend_overrides.<backend>` ({golden, alternate_golden, ssim_threshold}
only: restating target_call or a crop would stop the two backends retracing the
same frame through the same window). A per-backend golden REPLACES the shared
pair, matching another backend's declared image is refused BY NAME, and a --case
named explicitly that does not run a requested backend is an error instead of one
plan fewer and no message. The CMake emitter and the APK matrix refuse a case that
declares the key rather than silently emitting one golden for both arms.
DirectGLES is unchanged and that is asserted, not asserted-in-prose: a case with no
override resolves to itself, and the key is dropped from the resolved case even for
the backend that overrides nothing - so giving DirectVulkan its own golden does not
move the DirectGLES identity fingerprint and does not invalidate its checkpoints.
Each results.json row now records the golden, alternate golden and threshold it was
scored against.
run_android_retrace_local.py gets --matrix (the CI split subset, 39 cases, each
running only its own ci_backends - not --all, which adds the rd12 workload ID-P7-4
excludes), --repeat N, and --archive-dir. The archive is the point: the result root
is keyed by case and backend and by NOTHING else, so repeat 2 overwrites repeat 1
and the only artefact that survives a three-repeat run is the last one, which makes
"were the three repeats the same picture?" unanswerable after the fact - in the one
place where re-running to find out is expensive. It also refuses --benchmark with a
non-monolith --transport, which has always produced a monolith run under a spawn
label (run_benchmark_case passes args.env alone; p6/README.md records the pitfall).
compare_actuals.py computes the pair result.json cannot: SSIM between two actual
PNGs, plus a case x repeat x ssim-vs-golden x ssim-vs-first-repeat table over an
archive. It is the retrace gate's OWN SSIM - a transcription of ComputeChannelSsim
/ ComputeRgbSsim (trace_replay_core.cpp:630/:671), the only SSIM in the tree - and
the crop comes from each repeat's own result.json, so the two columns describe the
same rectangle. PNG decode is stdlib zlib, because an unavailable Pillow in the
device window would turn "the repeats diverged" into "the tool did not run".
TraceReplayActivity: resolveSpawnServerPath's two decisions were String.contains()
on the whole joined K=V;K=V list and neither was entry-aware. The one that bit:
`--env MOBILEGL_IPC_SERVER_PATH` with no '=' is the documented UNSET spelling
(trace_env_overrides_test.cpp:92) and the only way to ask for "spawn with no image"
and watch LaunchServer refuse by name - it did not match "MOBILEGL_IPC_SERVER_PATH="
so a resolved path was appended AFTER it and, because ApplyEnvOverrides applies in
order with setenv(...,1), the deliberate unset was silently undone. That is exactly
the "silently replacing it would make that knob untestable" the method's own comment
forbids. Two more: the key inside another entry's VALUE flipped both decisions the
wrong way, and the transport match was case-sensitive while ConfigLoader lower-cases
the value before matching (ConfigLoader.cpp:322). The parse moves to
SpawnServerPath, a class with no android.* import, so test_android_lifecycle.py
compiles and runs it with plain javac - the parse had no host-side coverage at all,
and its on-device failure mode is "the knob had no effect".
Only spawn gets a path, deliberately: it is the only transport that execs an image.
Red-once, all four: a stub case whose result names the DirectGLES golden fails a
--backend DirectVulkan run with "matched a golden another backend declares"; a
synthetic PNG pair with a closed-form SSIM (identical = 1.0 exactly, constant
black vs white = C1/(255^2+C1), inverted halves = (C2-2v)/(2v+C2)); the pre-fix
resolveSpawnServerPath body fails eight of SpawnServerPathTest's checks; and the
DirectVulkan TCP proof battery is the DirectGLES one under the other prefix,
because an empty prefix selection raises nothing and reads as a clean pass.
CI: test_run_tcp_matrix.py and test_compare_actuals.py join the R-16 step. The
matrix driver's stub regressions had NO CI step - they were run by hand and
recorded in a note - and they guard the tool that decides whether a device golden
run passed.
Counts in WSL: test_run_tcp_matrix 12 -> 18, tcp_lane_tools 4 -> 6,
test_compare_actuals 12 new, test_android_lifecycle green with the new Java unit.
OpenRA.DirectGLES, transport=spawn, on a Redmi: ssim=1.000000,
mismatchPixels=0, zero Fatal{ lines, three runs for three. The server is a
process the client launched out of the APK's lib/arm64/, and the client's own
log names its pid.
Four things stood between the desktop green and the device green, and every
one of them was invisible on desktop for the same reason: a build tree is not
a deployment, and Linux is not Android.
1. THE SERVER COULD NOT LINK. It links libMobileGL.so and is EXEC'd, not
dlopen'd, so it gets a fresh linker namespace with the DEFAULT search path
- and an APK's lib/<abi>/ is not on it. `CANNOT LINK EXECUTABLE ...:
library "libMobileGL.so" not found: needed by main executable`, before a
single line of MobileGL ran. On desktop CMake had been giving the target an
absolute build-tree RPATH, so the WSL server resolved its dependency
through a path no phone has. $ORIGIN is asked for via BUILD_RPATH (a raw
-Wl,-rpath,$ORIGIN reaches the generator unquoted and the SHELL eats it -
the device linker said `normalize_path - invalid input: "$"`), and because
the NDK drops RPATH from the link anyway, the LAUNCHER states
LD_LIBRARY_PATH: it is the one component that has already resolved where
the image lives, and a pair that is not co-located is not a pair.
2. THE RENDEZVOUS NEEDED A WRITABLE DIRECTORY. An Android app has no /tmp, so
bind() in the child had nowhere to put the node and the client refused by
name 20 s later. AF_UNIX endpoints now accept the ABSTRACT namespace with a
leading '@' - the systemd/D-Bus convention - which has no filesystem
presence at all: no directory, no mode bits, and no stale node to unlink
after a crash, which is the bind() failure Listen() has been working
around. Its reach is the network namespace, which for an app is the app.
StartSpawned mints '@' names; an explicit path still works everywhere, and
that is what P12's "connect to something somebody else is listening on"
will use.
3. PBUFFER WAS A DirectGLES-ONLY KNOB. Twice over: trace-replay-ci.sh gated
`--ez use_pbuffer true` on the backend name, and the JNI demanded a native
window for DirectVulkan unconditionally. A surface SHAPE is not a backend
property, and the coupling mattered because the Android GLWS makes a window
surface whenever gNativeWindow is non-null - so handing Magma a window was
the same as asking for one. Until P12 a spawned server cannot be given a
window at all: an ANativeWindow* is a pointer into the CLIENT's process and
SetWindowHandle is refused on the way across with Fatal{UnmigratedSurface,
"AndroidNativeWindow@P12"} (Rule H). Which is exactly what happened, one op
after the server had come up green.
4. THE RUNNER LOOKED IN ONE OF THE TWO OUTPUT DIRECTORIES. assembleTraceRelease
writes apk/trace/release; CI has staged the same artifact under
apk/trace/debug. A tree that has built locally has both, and picking the
wrong one retraces last month's APK and says nothing about it. Newest of
either, now.
MEASURED AND NOT FIXED: DirectVulkan on this device diverges under BOTH split
transports and does so nondeterministically - inproc scored ssim=0.988998 /
9836 px, spawn scored 0.976494 / 14658 px and then 0.988998 / 9836 px on a
repeat, while monolith with the same pbuffer surface scores 1.000000 / 0 px.
The two transports draw from the same set of outcomes, so this is the split
path on Magma against a real GPU, not the process boundary: P6 neither caused
it nor can fix it. DirectVulkan spawn IS green on desktop (lavapipe, 1.000000).
G14: one test name added, AnAbstractEndpointNeedsNoWritableDirectoryAndLeaves-
NoFile, which pins both halves - the handshake crosses an abstract name, and
nothing is left on the filesystem. A '@' mistaken for a path would have bound
a file of that literal name, passed here, and failed on the one platform this
exists for.
Two small pieces, so an Android spawn arm is a flag rather than a project.
THE RUNNER GAINS --transport. It already had a generic env passthrough - one
intent extra carries `K=V;K=V` all the way to setenv before the library is
dlopened - so the transport itself costs one entry and no new plumbing in the
five files between here and the device. monolith passes NOTHING rather than
MOBILEGL_TRANSPORT=monolith, so the default arm's environment stays
byte-identical to what it was before this option existed: a control that
changed when the option landed would not be one.
THE SERVER PATH CANNOT COME FROM THE HOST. Every other knob can, but this one
names a file that must be EXEC-ABLE, and on Android there is exactly one such
place: an APK's lib/<abi>/. W^X has forbidden the app's own data dirs since
API 29, and the packager only puts a file in lib/<abi>/ if it is named
lib*.so - which is why the server executable wears that name, and what P0
spike A proved on two devices. nativeLibraryDir contains an install-time
hash, so no host-side script can spell the path; the process about to launch
the server is the only one that can. TraceReplayActivity resolves it, and
only when the caller actually asked for spawn.
AN EXPLICIT MOBILEGL_IPC_SERVER_PATH STILL WINS. A caller that set one is
pointing somewhere deliberately - at a pushed build, say - and silently
replacing it would make that knob untestable on the one platform where it
matters most.
The APK must be built with -Pmobilegl.buildDisaggregated=ON or none of this
is reachable: without it ConfigLoader has no transport parser, accepts the
value, ignores it (CONTRACT-P5 rule 5), and the run is monolith under a name
that says spawn. The --transport help says so where somebody will read it.
- The verified-profile guard read the process environment as well as the profile: the test ran
after the source, so PROFILE_VERIFIED=1 exported in an operator's shell re-opened the fail-open
hole for every profile that says nothing. Both scripts now set PROFILE_VERIFIED=0 immediately
before sourcing, so the file is the only thing that can answer.
- A --device path that cannot be sourced was diagnosed as an unverified profile, because both
scripts cd to their own directory first and neither checked readability. The path is now also
tried relative to the directory the script was invoked from (which is what a repo-root-relative
--device means), and an unreadable one is reported as unreadable, naming both places tried.
- Verified: exported PROFILE_VERIFIED=1 + an unverified profile -> rc 2; exported 1 + a profile
with no key -> rc 2; a repo-root-relative path -> resolved, then refused for its own reason;
a missing file -> "cannot read the device profile"; odinlite.env -> past the guard;
--allow-unverified-profile -> the three warnings, then proceeds.
- test.yml's new step described a mechanism the tree does not have. G6's and G10's entries are
registered in the pull build too - they must be, for G2's name-for-name comparison - and skip
inside their bodies. The step's value is unchanged and its comment now says the true thing: the
`test` job runs those names as a column of skips, and this is the first CI job that unpacks a
build which compiled the assertions.
- trace_benchmark takes the wall baseline before the CPU baseline, the order OnFrameBoundary
already reads them in, so frame 0 stops reporting a CPU delta biased upward against its own
wall delta; and it includes <time.h> rather than <ctime> for the POSIX names it uses.
- The metric the disaggregation GO/NO-GO hangs on is per-thread CPU p50/p99, and the tree had no
first-party collector for it: no CLOCK_THREAD_CPUTIME_ID, no getrusage, no RUSAGE_THREAD, no
/proc/self/task anywhere under MobileGL/, tools/, android-plugin/ or scripts/.
- The retrace loop is the cheapest honest place to take it. Retrace runs --singlethread and
trace_benchmark states that Begin/OnFrameBoundary/End are only ever reached from that one
thread, so that thread's CPU time IS the client-side CPU cost: one extra clock_gettime per
frame, no root, no profiler, no debuggable build, no sampling - and no instrumentation
committed to a hot path inside the library.
- The CPU reading is taken before the wall reading at each boundary, so the syscall lands in the
wall delta rather than hiding inside the CPU delta. An inflated wall number is visible; a
deflated CPU number would not be.
- Report::frameCpuMs is the same length as frameMs or it is EMPTY. A clock that started failing
mid-run would otherwise be silently re-indexed and put frame N next to frame N+k, and an empty
series and a series of zeroes are different claims about the platform.
- SummarizeBenchmark is split into SummarizeSeries and reused verbatim for the CPU series rather
than duplicated: same tail window, same even-count median rule, same nearest-rank p95, or the
delta between the two series stops meaning anything.
- benchmark.json gains meanFrameCpuMs / medianFrameCpuMs / p95FrameCpuMs and the WHOLE
frameCpuTimesMs[] array beside frameTimesMs[]; result.json and the completion line gain the
three headline numbers. p99 therefore needs no device change - it is a host-side reduction over
an artefact that already exists, and run_android_retrace_local.py prints p50/p95/p99 off the
same trailing window the device summarised.
- Pre-flighted on the desktop CLI, which shares the same core: 2-frame run, cpu series aligned
with the wall series and strictly below it (wall 1290.787/20.225 ms, cpu 535.271/8.261 ms).
- PLAN-B.md §8.2 and appendix B add a batch of new runtime switches
(MOBILEGL_PIPE_PUSH / _VERIFY / _STATS / _LEGACY_MEMOS / _TEXEL_RETAIN_MB /
_INDEX_MIRROR_MB, plus MOBILEGL_IPC_* later), and §11 P0 wants them parsed beside
the existing ones. Today every knob that has to reach an Android replay costs an
edit in five files - run_android_retrace_local.py, trace-replay-ci.sh,
TraceReplayActivity's request record, the JNI marshalling, and the setenv block in
trace_replay_core.cpp. That per-knob tax is what this replaces: one extra,
`--es mobilegl_env "K=V;K=V"`, carries all of them.
- Applied last, immediately before dlopen(libMobileGL.so), so it can also override
the dedicated fields above it - MobileGL's config is read during the load, and an
escape hatch that cannot beat the defaults is not one. An entry with no '=' unsets
the variable, which is the only way to clear a default the marshalling sets.
- The existing per-knob flags stay: they carry semantics beyond a setenv (use_angle
also selects a variant, the dump lists are joined, DirectVulkan forces the
R11G11B10F fallback), and rewriting them as env strings would move that logic into
the callers.
- Surface: --env / MOBILEGL_TRACE_ENV in trace-replay-ci.sh, repeatable --env
KEY=VALUE in run_android_retrace_local.py, `mobilegl_env` intent extra,
Request::envOverrides.
- The two-level parse now lives in trace_env_overrides.hpp, beside the semicolon
splitter it shares with the texture and FBO dump lists, and
tools/trace_replay/trace_env_overrides_test.cpp pins it: the empty entries a
trailing ';' leaves behind must not become unsetenv(""), `K=` must stay a Set of
the empty string rather than an Unset (a knob read with getenv() != nullptr sees
those as opposite answers), and only the FIRST '=' may separate, or a value
carrying '=' is truncated without a word of warning. The whole MOBILEGL_PIPE_*
batch rides on this parse, and the only lane that exercised it end to end was an
on-device retrace, which would have reported a splitting bug as "the knob had no
effect".
- The check is built and RUN at build time and mobilegl_trace_replay depends on it,
so `cmake --build ... --target mobilegl_trace_replay` - the exact command of
test.yml's "Build trace replay" job, which never invokes ctest - runs it. It is
assert-free on purpose: that lane configures Release, and <cassert> under NDEBUG
would compile every check into a green run that checked nothing. Negative control:
swapping find('=') for rfind('=') fails 2 checks, and keeping the splitter's empty
entries fails 2 more.
- PLAN-B.md §11 P0 lists spike A (the Android delivery chain) as a P0 deliverable,
inherited verbatim from PLAN.md §15 P0; §8.1 inherits PLAN.md §11.1-§11.6, whose
Android path needs a second process. Android gives an application no writable
exec-able directory, so the only supported route is to name the binary lib*.so, let
the packager put it in lib/<abi>/, and exec it out of
getApplicationInfo().nativeLibraryDir. This builds that route end to end so the
spike can be answered with evidence instead of folklore.
- New root option MOBILEGL_BUILD_SERVER_SPIKE (OFF, ANDROID-only) adds the
MobileGLServer target from tools/spikes/server_stub/main.cpp with PREFIX "lib" /
SUFFIX ".so" and -fPIE/-pie: an .so name does not exempt the file from Android's
PIE requirement. Its RUNTIME_OUTPUT_DIRECTORY is pointed at
CMAKE_LIBRARY_OUTPUT_DIRECTORY, because AGP packages what lands in the per-ABI
library output directory and CMake would otherwise put an executable elsewhere.
- The option is opt-in on both sides. The plugin flavour cannot turn it on at all,
and the trace flavour builds it only when asked, with
`-Pmobilegl.buildServerSpike=ON` or MOBILEGL_BUILD_SERVER_SPIKE=ON in the
environment; a flavour that silently carries an executable nothing loads is the
kind of thing nobody notices until it ships. Verified both ways:
assembleTraceDebug -Pmobilegl.buildServerSpike=ON packages
lib/arm64-v8a/libMobileGLServer.so and `file` reports "ELF 64-bit LSB pie
executable, ARM aarch64 ... interpreter /system/bin/linker64, for Android 26";
the same task with no property packages only libMobileGL.so and
libtrace_replay_runner.so.
- The stub prints one line to stdout and writes the same line to the file named by
argv[1], then exits 0. The line carries pid/ppid/uid/gid and, decisively, the
child's own /proc/self/attr/current: only `u:r:untrusted_app:...` proves an
ordinary app process did the exec. An `adb run-as` shell runs in a different
SELinux domain, so a success there would prove nothing.
- RunSpawnSpike() starts the stub with argv [serverPath, markerPath], redirects the
child's stdout/stderr into a captured file (an app process has stdout on
/dev/null, so a printed line would otherwise vanish), waits for it, and reports
exit status, signal, the exec errno, the parent's own SELinux context, the marker
content and the captured stdout - to logcat, to the returned string, and to a
<marker>.report file, because the Activity finishes immediately afterwards.
- The child reports the errno of a REFUSED execve through a close-on-exec pipe.
Without it the one datum the spike exists to produce is lost: the parent only ever
sees a wait status, in which every reason has already been flattened into one exit
code, and EACCES (SELinux, or a noexec mount) versus ENOEXEC (a packager that
mangled the file) are opposite verdicts for the design. A successful exec closes
the write end for free, so the parent reads EOF and reports execErrno=0.
- fork/execve only. The earlier draft also carried a posix_spawn arm behind
`__ANDROID_API__ >= 28`, which was dead code in every configuration this repo can
build - bionic declares posix_spawn from API 28 and the root CMakeLists.txt pins
MOBILEGL_ANDROID_API_LEVEL to 26 and refuses to configure lower - and would have
silently become the production path, untested, on a minSdk bump. Keeping the arm
that actually ships means the spike measures the code the server would really use.
Nothing happens between fork and execve except open/dup2/execve/write/_exit, all
async-signal-safe, because the parent is a multi-threaded JVM process.
- The spike lives in its own TU, spawn_spike.cpp/.hpp, listed only by the trace
APK's CMakeLists. Its sibling trace_replay_core.cpp is compiled verbatim by the
DESKTOP mobilegl_trace_replay runner (tools/trace_replay/CMakeLists.txt names the
same file), where <android/log.h> does not exist, so nothing Android-only may live
there; spawn_spike.cpp carries an #error for anyone who adds it to that list.
- The Activity runs the spike, and nothing else, when launched with the
`mobilegl_spike_spawn` intent extra; that mode needs no trace, no golden and no
render surface. It is a separate JNI entry point rather than another parameter on
the 30-argument replay call, which it shares nothing with.
- Not yet run on a device: both device locks are held by another campaign. The
on-device verdict is the coordinator's step.
Program 203 reuses prefixSumCache for a second subgroup reduction before every workgroup invocation has consumed the first result. Add a fingerprint-gated SPIR-V pass that inserts the missing Workgroup acquire-release barrier while preserving native subgroup operations.
Keep the repair opt-in behind MOBILEGL_ITERATIONRP_FIX_BARRIER, cover insertion, pass-through, and idempotence, and enable it together with the existing iterationRP subgroup repairs for the matching Linux and Android CI retraces.
iterationRP's Program 203 declares shared vec2 prefixSumCache[32] for a
512-invocation workgroup indexed by gl_SubgroupID; any device narrower
than 16 lanes partitions into more than 32 subgroups and the pack writes
shared memory out of bounds (heap corruption on lavapipe's CPU
rasterizer, ssim 0.028 on the CI retrace). Fix it where the fault lies -
in the fixture - and keep the GL contract sound everywhere else:
- FixIterationRPSubgroupScratchPass: fingerprint-gated SPIR-V pass that
grows exactly that array to ceil(invocations/width) entries on sub-16-lane devices; every other module passes through byte-identical.
- DeriveNumSubgroupsPass stays default-on for the Adreno topology bug
and is made spec-sound: pipelines request REQUIRE_FULL_SUBGROUPS
whenever the workgroup shape makes the flag legal (computeFullSubgroups
enabled, local_size_x a multiple of the native width, subgroup count
within maxComputeWorkgroupSubgroups).
- EmulateSubgroupsPass: 32-lane virtual-subgroup lowering kept in-tree
as a last resort, enabled only by MOBILEGL_MAGMA_EMULATE_SUBGROUP=1 on
devices with no native subgroup support; fails closed on extended
subgroup instructions and on modules whose added scratch would exceed
maxComputeSharedMemorySize.
- IterationRPFirstReductionScenario skips gracefully outside the pack's
16..256-lane source domain; the new IterationRPScratchFixScenario runs
the fixture-shaped reduction on any width and asserts the exact
width-independent total. DriverPost keeps reporting FAIL on
out-of-domain devices.
- Program203 -> IterationRP rename throughout; the per-trace
num_subgroups_quirk plumbing is removed from the trace replayer, JNI
chain, and CI workflows.
The Minecraft-shaped driver benchmark could only be run from a desktop shell
against a desktop driver, which is the wrong machine: MobileGL exists to run on
mobile GPUs, and nothing said what its translation costs there. This puts the
same cases on an Android device, both in the plugin's POST screen and from a
shell, and adds the native-driver baseline they have to be read against.
The cases move into DriverBenchCases.inc so both harnesses run byte-identical
bodies - the desktop program resolving entry points from one EGL provider, and
DriverBenchJni.cpp calling MobileGL's frontend in-process. The JNI file binds
every gl*/egl* name to MG_Impl by macro rather than by linkage: this library
legitimately has the platform libEGL and libGLESv3 in its own lookup scope, and
a benchmark that quietly measured the device driver instead of the translation
layer would have looked like very good news.
Frames are now closed with a fence wait instead of glFinish. MobileGL implements
glFinish and glFlush as no-ops, so the old loop timed submit-plus-GPU on a native
driver and submit-only on a MobileGL backend, and the two numbers did not
describe the same work.
To measure a device's own driver the cases needed to be expressible in GLES:
ESSL 3.20 twins of the four shaders (chosen at runtime from GL_VERSION, since
MobileGL is deliberately still fed desktop GLSL - translating it is the thing
under test), a multi-draw hook that loops DrawElementsBaseVertex where the
multi-draw entry point does not exist, and an EGL bootstrap that falls back from
desktop GL to GLES 3. The binary cross-compiles for arm64 unchanged.
BenchService hosts each run in its own process and exits afterwards. That is not
caution: the backend is latched from MOBILEGL_BACKEND_TYPE at initialization, so
Espryt and Magma can never share a process, and Espryt's teardown terminates the
process-default EGL display, which would take the POST activity's own EGL
objects with it.
Running it found that Magma could not create a windowless context on Mali at
all - CreateInstance required VK_EXT_headless_surface, which no mobile driver
here exposes, and aborted the process. The Xlib path already probes and falls
back to a hidden window for the same reason on NVIDIA; Android now probes too
and hands the WSI an AImageReader's ANativeWindow, a real producer surface
attached to no display whose images are never acquired. DriverPost reports the
extension's absence as a WARN so the fallback is visible rather than silent.
Measured on a Mali-G77 MC9 (native / Espryt / Magma, ns per operation):
5495 chunk draws 14397 / 36934 / 33763, the 26.2 per-draw uniform-range pattern
13710 / 31205 / 21252, sodium-style multi-draw 256956 / 238389 / 209527. The
translation costs about 2.4x per draw here against 5-9x on the desktop, because
the mobile driver's own per-call cost dwarfs it - and both backends beat the
native driver on multi-draw, which it has to emulate.
Desktop unit tests 421/421; the POST screen and both Run Bench buttons verified
on the device.
Moves snapshot capture entirely into the apitrace retrace layer (glReadPixels + PNG encode). Drops the MOBILEGL_PRESENT_DUMP_PATH / MOBILEGL_PRESENT_STATS / MOBILEGL_PRESENT_DUMP_CALL / MOBILEGL_PRESENT_CURRENT_CALL / MOBILEGL_TRACE_CURRENT_CALL_OVERRIDE plumbing from Config, ConfigLoader, VulkanRenderer (GetPresentedDumpPixel/WritePresentedDumpPpm + present-stats readback), the EGL/GLX/Android ws shims, and the Android trace_replay_core PPM reader.
DirectVulkan ReadPixels on the default framebuffer now remaps raw swapchain pixels (top-left origin, preTransform-rotated) to GL orientation (bottom-left origin) so the retrace snapshot matches the golden; SwapchainObject also resizes the default-FBO stencil attachment to the swapchain extent to fix GL_INVALID_FRAMEBUFFER_OPERATION under the glReadPixels completeness check.
Checks render as a two-column table (name | colored status chip) with
alternating row stripes; per-check detail text is hidden until the row
is tapped, and the raw JSON report collapses behind a bottom toggle.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Opening a MobileGL plugin APK now shows a POST screen that probes the
device's GLES and Vulkan drivers independently against MobileGL's
expectations - a device may satisfy only one backend - and reports a
per-backend verdict (OK / DEGRADED / UNSUPPORTED) with per-check rows.
The GLES probe builds its own ES3 pbuffer context on the system driver
and reuses FillInGLESCapabilities, including the indirect-draw
gl_InstanceID semantics probe; the Vulkan probe checks instance/device
requirements and the optional features each DirectVulkan path degrades
without. Results serialize as ASCII-safe JSON through a JNI entry in
libMobileGL.so; PostActivity renders them and caches the run per
process (single-flight, rotation-safe). PluginActivity keeps its
NoDisplay stub but the launcher entry moves to the POST screen; FCL
plugin discovery reads application meta-data and is unaffected.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- compare actual output against primary and alternate golden images
- record the matched golden path in trace replay results
- allow APK and Linux retrace fixtures to pass alternate golden paths
- keep nostalgia validation accepting both Mesa and PC goldens
swung0x48
