- EGL swap semantics make the presented colour buffer's content undefined at
its next acquire (EGL_BUFFER_DESTROYED, the implementation default) and
every ancillary depth/stencil buffer's content undefined after ANY swap,
yet the default-FBO render pass reloaded both with LOAD_OP_LOAD every
frame; SwapchainObject now tracks per-image content validity (defined when
a pass stores into the attachment, invalidated at present) and the
render-pass manager turns an undefined attachment's tile load into
LOAD_OP_DONT_CARE with initialLayout=UNDEFINED, keyed into both hashes so
the cached LOAD variants cannot be hit by mistake
- the default framebuffer's depth attachment is now attached ON DEMAND: a
draw with depth test and stencil test both disabled (GL: a disabled test
neither reads nor writes its buffer), and no pending depth/stencil clear,
resolves to a depth-less pass flavour, dropping the D24S8 tile load AND
store outright - MC 26.2 renders its GUI into its own FBO and only ever
blits colour to the default framebuffer, so its swapchain pass carried a
full-screen depth round-trip for nothing
- the flavour only escalates: an active depth-full pass absorbs depth-less
draws unchanged, while a depth-using draw against a depth-less pass
resolves to an incompatible entry and splits, its depth loading DONT_CARE
(the content was undefined all along); the depth-less flavour is folded
into ComputeHash and the per-draw fast-path memo so the two flavours can
never alias
- Every storage-capable colour texture was created MUTABLE_FORMAT, and Adreno
gives up bandwidth compression on an image that may be viewed as any format in
its compatibility class. MC's main render target therefore ran uncompressed;
in a fill-bound scene that is the whole frame budget. Measured on Adreno 650,
MC 26.2, same scene and camera, device cooled to 38-40C before each run:
65.3 -> 80.9 fps (+23.9%), GPU busy ~93% in both.
- VK_KHR_image_format_list (enabled when present) fixes it without giving up
mutability: VkImageFormatListCreateInfo names the exact formats a view may
use, so the driver can keep the image compressed. The set must be exhaustive
or the result is undefined - for sampled views it is exactly what
ResolveSampledImageViewFormat can return over the three numeric domains.
- glBindImageTexture may name any compatible format, which cannot be enumerated
ahead of time, so a texture bound to an image unit gets no format list. That
is what VK_IMAGE_USAGE_STORAGE_BIT becoming on-demand is for: it makes
"unmarked" mean "will never receive an arbitrary-format storage view", which
is what makes the list sound. Removing STORAGE is worth nothing on its own
(65.4 fps, measured) - only the mutability bound pays.
- MarkStorageImageTexture runs over every collected image-unit texture before
the probe loop in PrepareStorageImageTextures, because that loop stops at the
first texture needing work and would leave the rest unmarked. The mark makes
NeedsStorageImagePreparation report true, which is what ends the render pass,
so the recreate lands outside it.
- storageUsageResolved separates "not upgraded yet" from "this format can never
carry STORAGE", so a format whose optimalTilingFeatures lack STORAGE_IMAGE
cannot ask for a recreate that will never happen. SyncTexture's cross-draw
early-out also has to break on a pending upgrade or the recreate never runs.
- An upgrade recreates the image and carries its contents forward through
PreserveTextureContentsOnRecreate, which submits its own command buffer and
waits. Whatever the frame already recorded into the old image is still
unsubmitted, so that copy would read pre-frame content and this frame's
rendering into the texture would be lost - exactly the render-target-then-
image-unit case. PrepareStorageImageTextures now flushes first; it takes the
FrameData rather than a command buffer because the flush retires the current
one, and drops the sampled-descriptor-set memo that described it.
- SyncCurrentFBO skips the READ-target pass when the same GL FBO is bound as
both draw and read (the common GL_FRAMEBUFFER case), but the read buffer
(glReadBuffer) is only applied inside SyncToBackend's READ path — so the skip
silently dropped every glReadBuffer change, leaving the backend read buffer
stuck at COLOR_ATTACHMENT0.
- Extract the read-buffer application into BackendFramebufferObject::
SyncReadBufferToBackend and invoke it from the skip branch (target == Read)
as well as from SyncToBackend, so reads always target the right attachment.
- Bind the backend FBO as READ inside the helper before glReadBuffer, since the
skip path only bound it as DRAW.
- Fixes KHR-GL3x.draw_buffers.draw_buffers_1 (reading COLOR_ATTACHMENT1 while
the FBO stays GL_FRAMEBUFFER-bound returned attachment 0's value); the render
was already correct, only the readback resolved the wrong attachment.
- BlankBlockComments replaced comment chars with spaces but preserved interior newlines, so a block comment spanning a newline inside a #define truncated the macro body (VALUE became empty)
- glslang has a conformant preprocessor and collapses a block comment to one space across newlines, so the delivered source now keeps comments intact and lets glslang handle them
- Fixes KHR-GL3x.shaders.preprocessor multiline_comment_define / redefine_object_multiline_comment / function_redefinition_3 (6 cases, both devices)
- FilterUnsupportedGpuShaderInt64 relied on the blanking to skip commented-out #extension lines; it now masks comments locally (MaskCommentsAndQuotedText) like the sibling passes, collecting edits and applying them back-to-front
- conditional_inclusion.basic_2 (defined() via macro expansion) stays failing by design: glslang rejects it as UB and working around it would mean re-running preprocessing MobileGL defers to glslang
- The 8-bit unorm shadow was uploaded as GL_UNSIGNED_BYTE, leaving the 8->5/6-bit requantization to the driver
- That rounding direction is implementation-defined: Adreno rounds to nearest (lossless round trip), Mali floors
- On Mali mid-range texels drifted one 5-bit step down, failing all 20 KHR-GL33.pixelstoragemodes.teximage3d rgb565/rgb5a1 cases (eps 1/32); layers with exact values (0.125/0.25/1.0-ish) passed, matching the observed 0,1,7-valid pattern
- PreparePackedNormUpload repacks shadow rows to GL_UNSIGNED_SHORT_5_6_5 / 5_5_5_1 with round-to-nearest, which exactly recovers the original 5/6-bit values (the shadow expansion is injective), so the driver stores them verbatim
- Idempotent across each region's level loop (glType is shared); RGBA4 exempt since its 8-bit expansion (v*17) is exact under either rounding
- Wired at all four SyncMipmapsToBackend upload regions (append-mipmaps, immutable TexSubImage, mutable full, dirty-level update)
- Mali (tile-based) does not resolve a texture's render into memory when it is read back through a different (temp) FBO than the one it was rendered with
- The cross-FBO glReadPixels raced the deferred tile resolve and returned pre-render clear contents
- Distinct render targets read back byte-identical, so KHR-GLxx.glsl_noperspective failed on Mali-G715 (all four programs read as the clear colour)
- glGetTexImage is already a CPU/GPU sync point so the extra drain is negligible; Adreno resolves eagerly and was unaffected
- The generic export stub returned (GLenum)1; dEQP reads any non-zero status as a lost device
- It is polled after every case (gl3cTestPackages.cpp:121) and sets QP_TEST_RESULT_DEVICE_LOST
- Under the default --deqp-terminate-on-device-lost=enable that tears the whole CTS run down
- MobileGL tracks no GPU resets, so GL_NO_ERROR ("no reset detected") is the honest, spec-correct answer
- Routed through GLImpl::GetGraphicsResetStatus like every other entry point, no inline body in Definitions.cpp
swung0x48